Markus Kaarma, Montana man, convicted in death of German exchange student Diren Dede


MISSOULA, Montana - A man who shot and killed a German exchange student caught trespassing in his garage was convicted of deliberate homicide Wednesday in a case that attracted attention as a test of self-defense laws that govern the use of deadly force to defend life and property.

Cheers erupted in the packed courtroom when the verdict was read in the case against Markus Kaarma, 30. The case generated outcry in Germany, where the government said it launched its own investigation.

Kaarma shot 17-year-old high school student Diren Dede in the early hours of April 27 after being alerted to an intruder by motion sensors. Witnesses testified Kaarma fired four shotgun blasts at Dede, who was unarmed.

markuskaarma.jpg

Markus Kaarma

Bill Gorman, AP

Kaarma faces a minimum penalty of 10 years in prison when he is sentenced Feb. 11. His lawyers plan to appeal.

Dede's parents were in the courtroom and hugged and cried when they heard the jury's decision.

Kaarma's http://www.aladdindoors.com/garage-door-repair lawyers argued at trial that he feared for his life, didn't know if the intruder was armed, and was on edge because his garage was burglarized at least once in the weeks before the shooting. They said under Montana's "stand your ground" law, Kaarma's actions were justifiable because he feared for his family's safety.

Prosecutors maintained that after the previous burglary, Kaarma was intent on luring an intruder into his garage and then harming that person. That night, Kaarma left his garage door partially open with a purse inside.

At trial, neighbors testified that Kaarma's girlfriend, Janelle Pflager, told them of the couple's plans to bait an intruder and catch a burglar themselves because they believed police weren't responding to area break-ins.

Prosecutors said Kaarma fired a pump-action shotgun four times into the garage - pausing between the third and fourth shots. During that pause, police testified, Kaarma might have adjusted his aim before he struck Dede in the head.

Dede's parents attended the trial, often leaving the packed courtroom during emotional testimony. The Hamburg teen was studying at Missoula's Big Sky High School and was to leave the U.S. after the school term ended in just a few weeks.

More than 30 U.S. states have laws expanding the self-defense principle known as the "castle doctrine," a centuries-old premise that a person has the right to defend their home against attack. The name evokes the old saying, "my home is my castle."

Since Florida in 2005 became the first of several states to expand the castle doctrine's use outside the home, a flurry of cases has tested the boundaries of self-defense law.

Most famously, a Florida jury acquitted security https://repairgaragedoors.com/ guard George Zimmerman in the shooting death of 17-year-old Trayvon Martin in 2012. Zimmerman followed the teenager, contended the boy attacked him, and was acquitted of murder charges even though he was not at his home at the time of the shooting.

In Germany, Hamburg prosecutor Carsten Rinio said his office was still looking into the Dede case after opening an investigation as required under German law. U.S. authorities were sent a request for documents several months ago, he said, but have not yet provided them.

http://www.cbsnews.com/news/markus-kaarma-montana-man-convicted-in-german-exchange-students-death/

How to Adjust Garage Door Springs


There are two main types of garage door springs. One is the torsion spring and the other is the side-mounted one. I only discuss the adjustment of the torsional type here, as they are the ones that are most commonly used.

Working

Torsion springs are components that bear the whole weight of a garage door. They are fitted in manually operated, as well as electrically operated doors. The whole garage door apparatus is very economically and smartly designed. The torsion springs and all the related apparatus are situated at the top of a garage door. The torsion shaft, powered by the spring, lifts drums, that easily winds cables connected with the doors, at the bottom. This enables the opening and closing of the garage door. There is a lot of tension, buckled inside the spring apparatus, which makes the job a bit dangerous, if instructions are not followed carefully.

Overview of Adjustment Procedure

Now, let me provide you with an overview of spring adjustment. There are some tools, that you'll need, to get the job done. They are:

7/16 Inch Wrench Two 18-inch long Tension Rods ( inch in diameter) Ladder Wear safety glasses during execution of the adjustment procedure.

First thing that you should do, is observe the torsion spring and the connected apparatus carefully. Locate a reddish color cone, around the spring. It should be placed on the left hand side of the torsion spring, and placed away from the garage door's center. Take note of the notches and screws that hold the torsion spring in place.

Next, get hold of one of the tension rods and push it into the first notch. This will achieve the objective of holding the cone. It is absolutely necessary that the tension rod is very firmly inside the first notch and it holds the cone tightly. This procedure is a safety measure that prevents the torsion spring from snapping and hitting you http://www.angelgaragedoors.com/garage-door-repair.html in the face, when you loosen screws.

Next, get hold of that 7/16 inch wrench and slowly loosen the two set screws. While doing this, make sure that the tension rod is placed in the notch firmly or else, the spring will snap.

Next, you must place another tension rod inside another notch, on the same cone. Holding the rods, move the cone towards the right side, to tighten or move it, and towards left to loosen it. This is the adjustment part. Once you are done with the adjusting and satisfied with it, remove any one of the rods and let the other one be placed into position. Next, you can tighten the set screws back again, as this will ensure that the new adjustments you make, are retained. Once the screws are totally tightened, the job is done and you can safely remove the other rod too.

Make sure that you make adjustments on both the torsion springs, as unequal settings will hamper the working of the garage door. It is a good idea to have a helper, who can pass the tools to you, while working. Don't go for actually adjusting the springs, until you exactly understand what you are doing.

http://www.buzzle.com/articles/how-to-adjust-garage-door-springs.html

what is the cost per square foot to dry in a garage?


Depends on the size of the garage, what kind of sheetrock you want, if you want insulation of some kind behind the sheetrock and to what degree you want it finished (filled, sanded etc.). In this economy, construction has slowed down http://www.angelgaragedoors.com/garage-door-repair.html so you might be able to get a decent price since builders, roofers and siding workers are experiencing a slump. Different companies will give different estimates or bids and timeline they can get it done so your best bet is to get the dimensions of the room and call some people up for estimates.

If you plan to do it yourself, then the cost could vary depending on what tools you already have and what supplies you will need to buy besides sheetrock, nails, chalkline, sandpaper, joint tape, compound and a few other things. To estimate your need of sheetrock, find the square footage of your room and http://www.aladdindoors.com/garage-door-repair add 10% to account for mistakes, waste and other unforseeable things.

http://www.answerbag.com/q_view/2566623

Heat Spurs Fears Deadly California Wildfires Could Revive


Heat Spurs Fears Deadly California Wildfires Could Revive - ABC News

Heat was descending again on a pair of deadly and destructive Northern California wildfires after a few days of fair and favorable conditions, and it brought with it fears the blazes could come back to life and major gains could be undone.

"We're looking at predicted weather of 100 degrees for the next couple of days, and at least mid-90s throughout the weekend," Scott Mclean, a battalion chief with the California garage door threshold Department of Forestry and Fire Protection, said Friday.

That makes it essential that the smoldering remains of the two giant blazes be dealt with as quickly and thoroughly as possible, Mclean said.

"You've got some high temps, high winds that could stir up those ash piles and those ember piles," he said. "We have to do that mop-up to be sure this fire goes to bed."

One fire in Lake County has killed three people, destroyed nearly 600 homes and burned hundreds of other structures. By Friday night it had charred 115 square miles and was 45 percent contained.

Another blaze burning in in Amador and Calaveras had left two people dead and destroyed 252 homes. It was 63 percent contained.

The two killed by that fire -- 66-year-old Mark McCloud and 82-year-old Owen Goldsmith -- died after rejecting orders from authorities to evacuate, Cal Fire spokeswoman Lynnette Round said.

It wasn't clear if the three dead in Lake County had received evacuation notices, but two of them declined requests by friends and family to leave.

The body of 72-year-old Barbara McWilliams, who used a walker, was found in her home in Anderson Springs. Her caregiver, Jennifer Hittson, said there were no evacuation orders when she left McWilliams' home on the afternoon of Sept. 12, and no indication the fire was that serious.

She asked McWilliams if she wanted to leave, but the retired teacher declined, saying the fire didn't seem bad.

Elsewhere in Anderson Springs, the body of former newspaper reporter Leonard Neft, 69, was found near his burnt car after what may have been an attempt to escape, his daughter Joslyn Neft said Friday. His wife had asked him to leave earlier Saturday, but he said the fire looked far away.

The body of Bruce Beven Burns, 65, was found in a building on the grounds of his brother's recycling business, where Burns also lived. It's unknown why he stayed.

A number of survivors of the fire said they never got an official evacuation notice when the danger was at its peak a week ago.

High school math teacher Bill Davis watched from his home as smoke mounted. From a previous fire in late July, he knew to expect a recorded call http://searsgaragedoors.com/ on his cellphone or look for someone coming through the neighborhood with a bullhorn yelling for people to evacuate.

"None of that happened," he said. His house in Lake County burned after he finally rounded up his cats and left.

Authorities defended their warnings and rescue attempts, saying they did all they could to reach people in the remote area of homes, many prized for their privacy.

"You may get that notice, or you may not, depending on how fast that fire is moving," Round said. If you can see the fire, you need to be going."

--------

Associated Press Writer garador Andrew Dalton contributed to this report from Los Angeles.

http://abcnews.go.com/US/wireStory/heat-spurs-fears-deadly-california-wildfires-revive-33875337

Leading Manufacturers of Garage Door Openers Integrate Johnson Controls' HomeLink QuickTrain Software Into Their Access Control Systems.


QuickTrain Feature Enables Faster, Easier 'Training' ofPopular, Vehicle-Integrated HomeLink System

DETROIT, Jan. 10 /PRNewswire/ -- Leading garage door opener manufacturers Chamberlain, Wayne-Dalton and Genie/Overhead Door have exclusively implemented Johnson Controls' Homelink(R) Wireless Control System with QuickTrain technology into their access control systems. The patented HomeLink system is integrated into a vehicle's overhead console, sun visor or rear-view mirror, and can be used to remotely operate garage doors, estate gates, rear and front locks, home security and lighting systems, and other convenience and safety devices. With the addition of the QuickTrain feature, training the HomeLink module is not only much easier, but it also takes less time.

(Logo: http://www.newscom.com/cgi-bin/prnh/20030423/JCILOGO )

The HomeLink Wireless Control System with QuickTrain technology will be in production on numerous 2007 model-year vehicles.

Currently, 30 million consumers use Johnson Controls' HomeLink system. The company's long-term agreements with the access control industry deliver a compatibility rate in excess of 98%, ensuring that consumers experience consistent and outstanding performance.

The HomeLink Wireless Control System with QuickTrain is among the innovations featured at the Johnson Controls product and technology exhibit at the 2006 North American International Auto Show (NAIAS) in Detroit. The company's display, in room D2-15 of Detroit's Cobo Center, will be open during media days at the event.

"Leading garage door opener manufacturers Chamberlain, Wayne-Dalton and Genie/Overhead Door all have adopted the QuickTrain technology," said Jim Geschke, vice president and general manager electronics, North America for Johnson Controls. "This integration shows the importance of the HomeLink technology today."

The HomeLink Wireless Control System with QuickTrain technology was first introduced at the 2005 NAIAS.

Johnson Controls is a global leader in interior experience, building efficiency and power solutions. The company provides innovative automotive interiors that help make driving more comfortable, safe and enjoyable. For buildings, it offers products and services that optimize energy use and improve comfort and security. Johnson Controls also provides batteries for automobiles and hybrid electric vehicles, along with systems engineering and service expertise. Johnson Controls has 136,000 employees in more than 1,000 locations serving customers in 125 countries. Founded in 1885, the company is headquartered in Milwaukee, Wisconsin. For additional information, please http://www.homeadvisor.com/cost/garages/repair-a-garage-door/ visit http://www.johnsoncontrols.com/ .

CONTACT: Debra Lacey for Johnson Controls, +1-734-254-5735

Web site: http://www.johnsoncontrols.com/ http://www.naias.com/

Company News On-Call: http://www.prnewswire.com/comp/473547.html

http://www.thefreelibrary.com/Leading+Manufacturers+of+Garage+Door+Openers+Integrate+Johnson...-a0140716120

Liftmaster 371lm Garage Door Remotes


Programming your Liftmaster remote is relatively easy. The best place to start is by looking on the back of your Chamberlain Liftmaster 371LM remote. Here you will see a label with the clicker's information. The main item that we are looking for is the model number which is indicated by the "Chamberlain". Note that in Canada, it might say 371LMC, or if you have an accessmaster 371AC remote, it will indicate 371AC. The only differences between these models are in the name. Functionally they are identical.

The first letter in the model number will indicate the series. The 3 in this case indicates Chamberlain Liftmaster's newest Security+ ERT line. Note that this should not be confused with the original security plus line as they operate on different frequencies and are thus incompatible. Any model number of remote that begins with this 3 will be compatible with other remotes, keypads, or keychains in this series.

The last number in the model number indicates the type of remote. A Liftmaster 370LM, for example, indicates that it is a keychain remote. The Liftmaster 371LM is the one button configuration of transmitter. The 372LM, 373LM, and 374LM each add a button to their configuration. The 376LM and 377LM are wireless keypads. The number on the top left of the label indicates internal part codes. The number used on most 371LM remotes is IC: 2666A 1573.

The number on the top right is the date of manufacture and is indicated in a format such as 06/07. The FCC ID is the number at te bottom of the remote and is http://www.garagedoorsofamerica.com/ often indicated by FCC ID: HBW1573. This number is shared by multiple models of remote so it should not be used to determine compatibility with the Chamberlain Chamberlain Liftmaster 371LM line of remotes. The last code http://www.sanantoniooverheaddoors.com/ in on the text on the left most side and is 132C2000-7. This simply indicates the regulations quoted as required by the FCC.

Once you know which remote that you will need, you will need to program your Liftmaster 371LM remote. To program the 371LM, press the purple button on the back of the logic board. Right afterwords, press the black button on the 371LM clicker. If everything went well, your new remote should be fully functional with your garage door opener.

The Liftmaster 371LM should last for years garage door opener remote without any maintenance. If any is needed, it is usually due to a dead battery. This can be easily fixed by inserting a screwdriver into the side panel to pry in into two pieces. You can then replace the button cell battery. This battery can be found at most supermarkets and hardware stores. For any other problems, it is almost always easier to buy a new garage door remote than to try and fix an old one.

By: FastSubmitArticles.com

Article Directory: http://www.articledashboard.com

Karen Stark has been in the Access Control industry for 5 years and manages customer support for TD Supplies. She is available by email via her website to answer all questions about the Access Control industry including questions about Garage door remotes and Proximity Cards.

http://www.articledashboard.com/Article/Liftmaster-371LM-Garage-Door-Remotes/677746

Garage area Home Costs - Know the Common Cost Varies Before You Start Shopping


Garage entrance prices do depart based on various factors. For information, installment the entrance yourself may reduce your costs sometimes by half. At the unvarying instance, the prices present be some higher if you say gear enlace rated Roll up gate NYC or if your entry is of an crooked size. Garage entrance prices faculty also mostly depart based on the material of the doors. Garage entranceway prices may vary anywhere from $300-$3000.

Here are both cipher characteristic garage door prices:

$300-$500 (not installed) - a new average-sized 16'x7' garage entry. This cost potentiality does not countenance installing. The soprano gift depend on the identify of entry Korea. This cost may sometimes steady get you a entranceway with sparkle isolation and poise clad. The threshold gift come with manual. You present essential the accustomed tools for installation. Beginning of the threshold can be finished with 2-3 mechanically-inclined group.

$400-$700 (installed) - a new 16'x7' tilt-up or trilled up wood or aluminum entryway with region laminate. Aluminum azygous inclination doors are real lightweight, and they do not oxidation. Nonetheless, they nick easily. These http://www.searsgaragedoors.com/GarageDoorRepair.aspx types of garage threshold prices include authority start.

$600-$700 (installed) - purchasing a new16'x7', non-insulated unary door of a cheaper kind. The value also includes jock artifact.

$750-$1,200 (installed) - a new 16'x7' poise threshold, and having it professionally installed. The little expensive models are usually sole tegument thinner conductor doors; statesman costly models are double-skin thicker element Roll up gate NYC with fizz insularism between two panels. Statesman costly doors are ordinarily 2 inches thickened, filled with insularism, with thicker poise panels, weather-stripping and brave seals. Steel doors do not dilapidate and do not poverty repainting as of times as flora doors, but they will dent and repairing may be awkward.

$800-$1,000 (installed) - this terms extent testament get you a new 16'x7' divided roll-up insulated entrance, premeditated to be stained, positive pro installment.

$1,200-$2,000 (installed) - you instrument be competent to acquire a new 16'x7' higher-grade roll-up with discolored wood entryway panels. These garage entranceway prices depend on the typewrite of author and any decorative additions to the panels, includes jock installation.

$1,200 (installed) - you can get a large 16'x8' white property brace entrance that is constructed of two poise panels that sandwich 2 inches of polyurethane froth with a pre-painted low mending outdoor. The soprano includes start fees.

$1,300 (installed) - most wrap rated doors are around this toll. you'll be competent to get a new 16'x7' tall instrument rated entry, and it includes start.

$2,500-$3,000 (installed) - for the fastidious householder, you can get a a new custom-built wood entry in this terms capableness. Painter is favorite because of its undid seem and music. Yet, flora doors expect regularized maintenance, since it may vantage snap and garage door spring repair warping with age. These soaring garage entryway garage door insulation prices may also be caused by the unrhythmical situation of the entrance, much as a tall end oversize 18'x8' entryway with a causative. Toll includes professional commencement.

Garage entree prices motley on nodule factors. The damage reach is really inaccurate ($300-$3,000), so it is a intellectual melody to do some shopping in rule to happen the human prices.

http://www.selfgrowth.com/articles/garage-area-home-costs-know-the-common-cost-varies-before-you-start-shopping

How to Program a Remote and Homelink Garage Door Opener by Jeremy Harmon


When you have an automatic garage door, it is quite difficult to open it without a garage door opener. It is especially difficult when you are in the car and you need to pull the car into the garage. You do not want to have to get out, open the door, get back into the car, and then pull it into the garage. You want to be able to push a button and the door open up. However, you do have to program that garage door opener to do the job.

You have two types of garage door openers. You have remote garage door openers and you have Homelink openers. Remote openers are your average remote control garage door opener that clips onto the visor in your car. The Homelink system is a garage door opener that is built into your car. There are manufacturers such as Audi that install Homelink systems within their cars.

Programming the traditional remote

How you program your traditional remote depends on the manufacturer. Just like a remote control that you are programming to go with your television, you may have certain numbers to punch or you may need to hit a certain combination of buttons. If you have a remote that has numbered keys on them, then you should be able to input the code and be on your way. If you have a garage door opener with just up and down buttons, you may have to press the buttons in a certain order.

Programming a Homelink System

You will be given instructions on how to program your Homelink system to the garage doors at your home. However, there are some generic programming instructions http://www.charlotteoverheaddoors.com/ in case you need them. And what is great about Homelink is that it can be programmed in just a minute. Here is an example of programming instructions:

Press and hold the buttons on the outside. You will notice the diode will start flashing after 20 seconds.

Now you just need to hold the remote control to your garage door about 5 to 30 centimeters away from Homelink's transmitter. This may take a few tries.

Next, you need to press your remote control's button and the button on the Homelink system that you want to use for your garage door. However, do not release the button until you have completed the next step.

You will now notice that the diode will flash slow and then faster. When you see the rapid flashing, you will need to release the buttons. This means the programming has been successful.

The process is a very simple one. It is also a very quick one as you can see. Of course, how you program your Homelink system will vary. Not all of the buttons in all of the different car models look the same, but the concept is more or less the same. At least now you know that it does not take any extra special technological knowledge to get the job done.

http://www.articlecity.com/articles/home_improvement/article_4103.shtml

Reprogramming a Toyota Sienna Garage Door Opener with a Liftmaster/Chamberlain Unit


Last week, one of the 3 garage door buttons in our 2008 Toyota Sienna broke. The button snapped while being pressed and is now floating in the socket. The cost of repairing the broken button is around $500 - hardly worth fixing.

I am almost embarrassed to admit this, but it has taken me several hours and 2 trips to Home Depot to reprogram a different button so that it works with our LiftMaster (aka Chamberlain) garage door opener. In case I ever need to do this again, or on the off chance there are others in cyberspace with the same problem, here is the solution:

Clearing the MemoryIf you have existing codes loaded into your Sienna's garage door console that need to be erased, you need to hold down the first and third buttons for about 20 seconds until the indicator light flashes. In my case, I was able to play with the broken button to find when it gave off a signal. At this time, I pressed the third button and was able to clear the memory.Buy a New Garage Remote Control

Unfortunately, the Sienna can't be synched directly with the LiftMaster. You will need a new clicker to synch with the overhead unit, which can then be used to reprogram your van. At the outset, I didn't recognize that this was http://www.aladdindoors.com/garage-door-repair a 2 step process.

Purchase a clicker that is compatible with Chamberlain. The first one that I bought was an older model that had DIP switches that required programming. Apparently, these will only work for garage door openers that were manufactured before 2003. This turned out to be a huge time suck. DON'T buy a remote that contains these switches.I purchased the model shown below from Home Depot, and am now realizing that the Amazon version was $15 less at the time that I write this.Programming the ClickerEnter the program mode on the new remote by pressing the small garage door motor button on the back until the red light (on the front) turns on and remains steady. Press the "learn" button on the overhead unit. Within 30 seconds, press the button on the clicker that you are trying to program for 2 seconds. Repeat until the light on the overhead unit flashes. Once that happens, your remote isprogrammed. Press any other button to exit "programming mode" on the clicker. Programming your SiennaIf the memory has been cleared, simply press the button that you want to program in your van and, while holding the clicker about 2 inches away, press the correct button. The van's indicator light will change from a slow blink to a fast blink. At this point, you can release both buttons. The van is now 'primed' to accept the signal from the LiftMaster. Press the "learn" button on the overhead unit. Within 30 seconds, press the button in the van TWICE for about 2 seconds each time. The first time, you will see the lights flash on the overhead unit. The second time, the garage door will open. Congratulate yourself - you are done!

http://www.infobarrel.com/Reprogramming_a_Toyota_Sienna_Garage_Door_Opener_with_a_LiftmasterChamberlain_Unit

An Attractive Look to Garage with Beautiful Garage Doors by Agnes Celina


As the door of a garage is the major portion of it and vey much exposed to the sight of the owners as well as others. Thus in this article we would discuss the decoration of a garage through the decoration of its door. In addition to decoration of the door the maintenance of other parts of the garage is also a minor part of the article.

Generally the people dont consider the garage as important as other apartments of the homes. With regard to the paint and cleaning of the garage, it is not considered as necessary as the paint and cleaning of other parts of the home. It is not a suitable consideration to the garage because like other accommodations, the garage is also a useful accommodation for the car and other https://foursquare.com/user/121544363/list/roller-shutter-advertising-1 transport. Besides in addition to parking of the vehicles, we use the garage for storage of other articles of the home. Thus it is our duty to maintain it like other apartments. The reason of such consideration to the garage is that it is not adjacent to the other apartments of the homes. What is our loss if we pay the consideration to the garage like other apartments? We should keep the garage neat and clean and painted like other parts of the home. It would be an additional pleasure for us.

The main way to decorate the garage is its door which is the size wise major portion and exposed one. For this purpose it is very easy to become successful. In this connection you need to know about the most beautiful garage door available in the market. No much botheration is required; firstly you should consult the internet and check all the websites relating http://en.wikipedia.org/wiki/Garage_door to the garage doors. If the pages of the sites of the companies have the pictures of the available doors, you can view carefully. If pictures are not available, by calling the agent of the company serving in your area you can see the pictures of the latest models of garage doors. Besides you can visit the shops and companies physically to see the variety of the garage doors. Further you can see the installed doors in the garages of your friends, neighbors and relatives. If you do so, it is more than sufficient. The garage door selected by you would be the most beautiful door of the recent time.

Your next step is installation of the door. It would be appropriate if you hire the craftsman from the same company or shop from where you buy the door. The company or shop having beautiful door should have the skilled persons to install the garage door and electric opener. And they necessarily have such craftsmen to earn good reputation for growth of business during the tough competition time. For your satisfaction you can inquire about the skills and experience of the deputed person. Thereby you can get the professional and beautiful installation of your beautiful garage door and electric opener.

http://www.articlecity.com/articles/home_improvement/article_7115.shtml

Overhead Door Corporation Purchases ANKMAR's CladPanel(TM) Door Division


DALLAS--()--Overhead Door Corporation, the nations leading manufacturer of overhead doors and openers for residential, commercial and industrial construction applications, today announced that its Access Systems Division (ASD) purchased the assets of ANKMARs CladPanel door division located in Sweet Home, Ore. ANKMAR was launched in 1956 as a Denver-based garage door installation and service firm. In 1974, ANKMAR manufactured its first wood doors and, by 1978, had pioneered the CladPanel composite doors.

Adding a well-known and respected product like CladPanel doors to our portfolio is consistent http://www.garagedoorsca.com/ with our growth initiatives and complements our existing product lines, said Dennis Stone, president and chief executive officer of Overhead Door Corporation. Weve seen industry sales on wood garage doors double over the past two years. Enhancing our line with an eco-friendly wood composite residential garage door is a natural progression.

CladPanel doors panels are made from resin-bonded wood composites and finished with tough resin overlays that are specifically formulated to resist moisture. The doors are made from more than 85 percent recovered and recycled content.

About Overhead Door Corporation

Overhead Door Corporation, based in Dallas, Texas, is the nations leading manufacturer of overhead doors and openers for residential, commercial and industrial construction http://www.diy-garage-door-parts.com/ applications. There are three divisions of the company including the Access Systems Division (ASD), the largest, which features the Overhead Door and Genie brands; Horton Automatics, which includes automatic entrance systems; and TODCO, the largest producer of overhead doors for the transportation industry worldwide. Overhead Door created the original overhead garage door in 1921 and the first garage chamberlain garage door door opener in 1926. Overhead Door Corporation is a subsidiary of Sanwa Shutter Corporation of Tokyo, Japan. For additional information, visit www.overheaddoor.com.

http://www.businesswire.com/news/home/20080228005142/en/Overhead-Door-Corporation-Purchases-ANKMARs-CladPanel-TM

How to remedy power outlet for garage door opener being too far away from opener itself?


How to remedy power outlet for garage door opener being too far away from opener itself?

I http://precisiondoor.net/ have a standard 7-foot garage door, but my garage is over 13 feet tall. Therefore, my garaged door opener is suspended several feet from the garage ceiling. The power outlet for the garage door opener is installed in the ceiling directly above the opener. However, it seems that http://bit.ly/1DhsDdt garage door openers do not come with power cords long enough to reach my power outlet, and http://www.garagedoorseattle.com/services/garage-door-repair/ the owners manuals warn against using extension cords. Also, replacing the power cord on the opener will void the warranty on the opener. Any ideas how to remedy the situation?

https://answers.yahoo.com/question/index?qid=20100620015741AA4S1SR

Breaking Bad spoiler about that auto-run machine gun gadget - Ann Arbor Gadgets


George Koprowicz is a professional chemist specializing in adhesives, sealants, elastomers and other thermoplastic custom garage doors polymers or plastics. George has one US Patent in http://www.garagedoorrepairexperts.com/ this field (5,041,492). George is currently in the freelance writing and consulting business. He http://www.youtube.com/watch?v=BCj5MxFyz_M has sold some 200+ articles or copy on wristwatches, winning chess, health, travel, luxury items, immigration, population issues, translation, cross-cultural issues and others. He currently maintains about 30 active blogs of his own creation. The anchor piece of his blogs is his website called "Homeland Currency Security". This blog was created mainly out of his continuing interest in RFID technology and its potential for uses in fields like anti-counterfeiting. He believes there are many unexplored applications for RFID. The website also reflects his interest in other technologies including that of tracking https://www.goodreads.com/user_status/show/73077656 dangerous asteroids and other NEOs. The website includes a copy of his submission to The Planetary Society in response to their RFP on asteroid tracking. His other blogs reflect his interest in a wide variety of topics; humor, cooking, politics, science, biology, zoology and so on. You may contact him through his website http://homelandcurrencysecurity.blogspot.com

http://www.examiner.com/article/breaking-bad-spoiler-about-that-auto-run-machine-gun-gadget

June Marks Annual Garage Door Safety Month.


Overhead Door Corporation Celebrates with Safety and Security Tips toStay Safe All Year Long

DALLAS, June 10 /PRNewswire/ -- There's good reason to keep the home's largest moving object in proper order. The garage door is often the largest entry point in the home. Consumers can bring garage door and opener safety awareness to the home front this summer-the International Door Association (IDA) and the Door & Access Systems Manufacturers Association (DASMA) have designated June as Garage Door Safety Month.

(Photo: http://photos.prnewswire.com/prnh/20100610/CL19266 )

(Photo: http://www.newscom.com/cgi-bin/prnh/20100610/CL19266 )

Overhead Door Corporation, the nation's leading manufacturer of overhead garage doors and openers under well-known brands like Overhead Door, Genie, and Wayne-Dalton, is offering consumers 10 safety and security tips to be protected throughout the year.

* Make sure the garage door opener control button is out of the reach of small children.

* Do not let children play with garage door remote controls.

* Never place fingers between door sections. Explain the dangers to children and consider pinch-resistant door panels.

* Consult the owner's manual and learn how to use the garage door's emergency release feature.

* Visually inspect the garage door each month. Look at springs, cables, rollers and pulleys for signs of wear. Do not attempt to remove, adjust or repair these parts or anything attached to them. These parts are under high tension, and should only be fixed by a trained door repairman.

* Test the garage door opener's reversing mechanism monthly byplacing a 2x4 board or a roll of paper towels in the door's path.If the door does not reverse after contacting the object, call aqualified garage door professional for repair. If the opener has notbeen replaced since 1993, seriously consider a new one with auto-reverseas a standard feature.

* While on vacation, unplug the garage door opener unit or use a wall vacation lock console security switch, which http://www.garagedoorrepairexperts.com/ renders remotes unusable and is an optional accessory to most openers.

* Do not leave the garage door custom garage doors partially open. When activated again, it may travel downward and come in contact with an object in its path. This also compromises a home's security.

* If the opener does not have rolling-code technology, which changes the access codes each time the opener is used to prevent code grabbing, be sure to change the manufacturer's standard http://www.garagedoorservice.com/ access codes on the opener and remote control, or consider investing in a newer model with more safety and security features that are now standard.

* Never leave the remote control in the car or with a parking attendant. A stolen opener or car leaves you more susceptible to home invasion. Consider using a key chain remote and always lock the entry to the inside of your home, especially if your opener is programmed to your vehicle. It's a small inconvenience for safety and security.

About Overhead Door Corporation

Overhead Door Corporation, based in Dallas, Texas, is a leading manufacturer of doors and openers for residential, commercial, industrial and transportation applications. There are three divisions of the company, including the Access Systems Division (ASD), the largest, which features the Overhead Door, Wayne-Dalton and Genie brands; Horton Automatics, which includes automatic entrance systems; and TODCO, the largest producer of truck doors for the transportation industry. Overhead Door Corporation created the original overhead garage door in 1921 and the first electric garage door opener in 1926. It now has over 3,500 employees, 24 manufacturing facilities, 79 regional sales centers and over 6,000 distributors and dealers that service national builders, national accounts, architects, general contractors and homeowners, as well as major retailers in the U.S. and Canada. Overhead Door Corporation is a subsidiary of Sanwa Holdings Corporation of Tokyo, Japan. For additional information visit www.overheaddoor.com, www.wayne-dalton.com, www.geniecompany.com.

About Sanwa Holdings Corporation

Established in 1956 as a shutter manufacturer, Sanwa pioneered the engineering, production, marketing and distribution of steel building materials in Japan. Today, the company is the number one manufacturer of construction products in the Pacific Rim and the combined entity is among the world's leading suppliers of building products with an established and growing presence in 50 countries on five continents. For more information, visit www.sanwa-hldgs.co.jp.

SOURCE Overhead Door Corporation

http://www.thefreelibrary.com/June+Marks+Annual+Garage+Door+Safety+Month.-a0228524391

How to Choose the Correct Garage Door Opener


Have you recently purchased a new garage door? Maybe you need to replace an older door. If so, then now is a good time consider adding a new garage door opener as well. On the other hand, maybe your garage door is just fine, but you still dont have an automatic opener installed. If thats the case, then its definitely time to think about a new garage door opener for your home in St John or Merrillville. A garage door opener can http://www.mesagaragedoors.com/repair/ make a world of difference in your life because it can add a lot of convenience. Theres not good reason to still be opening your garage door manually.

The Many Styles of Garage Door Openers

Just as there are hundreds of different styles and designs of garage doors, there are also many different kinds of garage door openers. While they all essentially perform the same function, they arent all the same. They are many makes and models of garage door openers, but at Affordable Garage Door, Inc., we offer the complete line of both commercial and residential LiftMaster garage door openers. However, there are still many options to choose from within the LiftMaster brand. So how do you know which garage door opener is right for you?

Important Factors to Consider

First off, you need to know that garage door openers have three different and unique types: Chain drive, Belt Drive and Screw Drive. They all have different benefits, so you need to determine which one best fits your needs. Belt drive openers are very quiet and are a good fit for garage doors that are close to your living space. Garage door openers with a chain drive are probably the most common because they work for just about any type of garage door. They can lift even the heaviest garage doors, but are not as quiet as belt drive openers. If you have a one-piece door that tilts, then a screw drive is a good choice. They are also quieter than a chain drive opener and they are very durable.

Affordable Garage Door Can Help You Make The Best Choice

If you are looking for that perfect garage door in Schererville, then please dont hesitate to contact us at Affordable Garage Door, Inc. We will work with you and review all your options. You will have a clear understanding of whats available and youll have the necessary information to make an informed decision. We serve all of our customers with the same approach and your satisfaction and safety are our number one goal. If its time to get a new garage door opener, then call Affordable Garage Door, Inc. today at 219-696-4279, or toll free at 800-584-5845. You can also reach us online by clicking here.

Categories: Garage Door Opener

Tags: https://foursquare.com/user/120320707/list/trends-in-florida-garage-door-sales-4 door inc, , , , , , , , , , , , ,

http://www.affordabledoorinc.com/how-to-choose-the-correct-garage-door-opener/

Radio Signal MIght Be Jamming Connecticut Garage Doors, Navy Says


HARTFORD, Conn. -- A radio signal being transmitted out of a submarine base is likely behind reports of garage doors failing to open and close in southeastern Connecticut, the U.S. Navy said Monday.

The signal is part of the Enterprise Land Mobile Radio system, which is used by the military to coordinate responses with civil emergency workers, said Chris Zendan, a spokesman for submarine base in Groton.

The problem, first reported by The Day of New London, is that the same frequency is used at very low levels by the manufacturers of garage door openers. The signals from remote controls to open or close the doors are blocked by the signal from the base.

Overhead Door Co. of Norwich Inc. told the newspaper it has been receiving complaints from several towns near the base and has found no problem with its equipment. The http://home.howstuffworks.com/home-improvement/repair/how-to-repair-a-garage-door1.htm Associated Press left messages with the company Monday.

Sondra Tuchman, of Montville, told the newspaper she has to get out of her car, stand in front of the door and press the remote for the opener to work. She said an installation company told her she would have to pay about $300 to change her system to another frequency.

The garage-door companies do not need to be licensed to use the frequency because the remote controls transmit at such low levels, Zendan said. But the homeland security needs for the signal take precedence, he said.

"Because garage door openers are unlicensed devices, they are not offered any protection from interference by licensed users in the same frequency band, and in fact are required by federal law to accept interference from licensed users," Zendan said. "Base commanding officers do not have the authority to change those systems, and unfortunately we cannot offer compensation to the unlicensed users."

Dave Osso, brand manager for The Genie Co., a Mt. Hope, Ohio, manufacturer of garage door opening systems, said the problem dates to the 1990s, when the military began using the garage door opener same frequency used for door openers. The company sells dual-frequency openers that switch to a different frequency if interference is a factor, he said.

"For the most part, people over the years figured it out," Osso said.

For decades, the military has held a portion of the radio spectrum, from 138 to 450 megahertz, in reserve. But that range came back into use after the Sept. 11, 2001, terrorist attacks, when officials discovered they needed a new system to allow civil and military first responders to communicate.

The ELMR system, which uses radio frequencies between 380 and 399.9 megahertz, was developed. It began operating at the sub base last summer but is not unique to the state.

In 2006, residents around an Air Force facility in Colorado Springs, Colo., saw their garage-door remotes stop working when the 21st Space Wing began testing a frequency for use during homeland security emergencies or threats. In 2005, testing of a similar system in Fort Detrick in Maryland resulted in similar problems.

In May, Overhead Door Co. said it would offer free installation and parts to change the signal on remote garage door openers near a naval base in Newport, R.I.

http://www.huffingtonpost.com/2012/07/23/navy-radio-garage-doors-connecticut_n_1696072.html

Wayne Dalton Optimizes Garage Door Design Center for Tablet Use


Enhanced Visualization Tool Ideal for Dealer Sales Calls

LEWISVILLE, Texas Garage door dealers and customers now have an easier way to browse and choose among Wayne Dalton residential garage doors thanks to the all-new Wayne Dalton Garage Door Design Center, which has been completely redesigned and optimized for tablet viewing.

Our enhanced Garage Door Design Center lets Wayne Dalton dealers take a powerful sales tool with them whenever they go on sales calls, said Ali Isham, Wayne Dalton Brand Manager. By simply taking a photo with their tablet when they arrive at the customers home, dealers can show how the latest garage door styles, colors and accessories will look on the home before any purchase is made.

Available at Wayne-Dalton.com, the Garage Door Design Center is a visualization tool that is optimized for viewing from a computer or tablet. If a home photo isnt available, the tool also allows users to choose from photos of common home designs to see how Wayne Dalton garage doors complement various architectural styles.

Features added to the Wayne Dalton Garage Door Design Center include:

Design and optimization especially for tablets;Easier navigation;Products organized into collections consistent with Wayne-Dalton.com; and,Access to Wayne Daltons full product offering, including all new products and product enhancements.For more information about the Garage Door Design Center or Wayne Dalton garage doors, visit www.Wayne-Dalton.com, like us on Facebook, or follow us on Twitter.

About Wayne Dalton

Wayne Dalton, a division of Overhead Door Corporation, is a world-class leader that has designed and manufactured residential and commercial garage doors for over 50 years. For dealers, the company is known as a proactive business partner that prides itself on providing a wide variety of easy-to-install innovative products and smart sales tools that help them grow their business. At the same time, Wayne Dalton simplifies the purchase process by providing a full range of door options and styles through conveniently located dealers. Nine manufacturing facilities, over 70 Sales Centers, and over 2,000 independent dealers, both domestic and international, ensure unmatched distribution. Wayne Dalton continues to expand its offering intoother building material categories, and offers a complete line of Fabric Shield Storm Protection Products. For more information, visit www.Wayne-Dalton.com, our Facebook page or follow us on Twitter.

About Overhead Door Corporation

Overhead Door Corporation, based in Dallas, Texas, is a leading manufacturer of doors and openers for residential, commercial, industrial and transportation applications. The company has five divisions: Access Systems Division (ASD), which features the Overhead Door and Wayne Dalton brands; The Genie Company, manufacturer of remote-controlled garage door opening systems; Horton Automatics, a manufacturer of automatic entrance systems; TODCO, the largest producer of truck doors for the transportation industry and Creative Door Services, Western Canadas leader in providing door products and http://www.garagedoorsofamerica.com/ services to the residential, commercial and industrial markets. Overhead http://url.org/bookmarks/jealousradio5180 Door Corporation created the original overhead garage door in 1921 and the first electric garage door opener in 1926. Overhead Door now employs more than 3,500 people, has 22 manufacturing facilities, 78 regional sales and service and installation centers and more than 5,000 distributors and dealers that service national builders, national accounts, architects, general contractors and homeowners, as well as major retailers in the http://www.garagedoorservice.com/ U.S. and Canada. Overhead Door Corporation is a subsidiary of Sanwa Holdings Corporation of Tokyo, Japan. For additional information, visit www.overheaddoor.com, our Facebook page or follow us on Twitter.

http://news.thomasnet.com/companystory/wayne-dalton-optimizes-garage-door-design-center-for-tablet-use-20019763

Superlative camper vans based on the Mercedes-Benz trucks at the Caravan Salon 2015 in Düsseldorf - The Rakyat Post


STUTTGART, Sept 5, 2015:

Usually they are to be found reliably and economically conveying freight as part of short and long-distance transport operations, day in, day out. But the heavy-duty Mercedes-Benz Antos and Actros trucks have other talents entirely, for they also serve as the ideal platform for the ultimate high-class hand-produced camper vans. Two stars amongst them are the Vario Alkoven 1200 based on the Mercedes-Benz Antos and the Concorde Centurion 1200 based on the Actros.

A floor tiled and heated throughout, fine furniture featuring a genuine veneer in American cherry in the living room, and sanded-varnish furniture in the spacious bedroom. A work surface in the kitchen and a wash basin in the bathroom tailor-made in cast stone, fine leather upholstery on the sofas the Vario Alkoven 1200 is going up in the world from interior to dreamterior.

The camper van from the Vario Mobil production facility in Bohmte near Osnabrck is a masterpiece of handcraftsmanship, which is also evident in the wall covering made of a furniture relief wood with a sanded-varnish finish in the corridor leading to the bathroom and the illuminated glass cabinet with a satined door.

Two hydraulically extending bays increase both the living room and the bedroom of the twelve-metre-long, four-metre-high superlative mobile home. The on-board technology is equally as exciting as the furniture. Take the two 32-inch flat screens, steam cooker and induction hob, central vacuum cleaner and washing machine with a tumble dryer, for instance.

A camera system secures the door after all, you want https://www.diigo.com/user/absurdremo731 to know whos coming knocking. Independence while travelling is ensured by batteries with a capacity of 1200 Ah, a power inverter with an output of 6000 W, a solar energy system and generator. In the tanks there are 390 l of diesel and 500 l of fresh water. And in the rear garage with automatic intake a Mercedes-Benz SLK awaits a jaunty spin, in case things should get too tight for the camper van.



The load-bearing basis of the Vario Alkoven 1200 is an air-suspended Mercedes-Benz Antos 2543 L with a slim M-cab fully equipped from the bi-xenon headlamps to the Active Brake Assist 3 emergency braking assistant. Thanks to its six-cylinder engine http://www.amarr.com/residential/service_and_support/garage_door_repair/ with a displacement of 10.7 l and output of 428hp, the three-axle vehicle is generously motorised and has a weight of up to 25 t. As an option the luxury model is also manufactured on the basis of the Mercedes-Benz Actros.

Just as spectacular is the Centurion 1200, the individually produced flagship of the camper van manufacturer Concorde based in Aschbach, Franconia. Beneath the hefty body is an Actros 2542 with a GigaSpace cab, also with full air suspension. Alongside the spectacular dimensions including a length of twelve metres and a height of 3.85 m, there are the unmistakeable hallmarks of a super-class camper van, from the illuminated Mercedes star through chromed mirror trims to the window-level panelling with black-tinted safety glass.

One of the Centurion 1200s special features: the cab is integrated into the living room, and travelling companions make themselves at home on two pivoting single seats behind the https://foursquare.com/user/121974797/list/four-marketing-myths-that-steal-sales-2 cockpit. In the Concorde, too, a long extendable bay enlarges the living room. Its furniture sports genuine wood veneer in dark walnut plus high-gloss surfaces in http://www.amarr.com/residential/service_and_support/garage_door_repair/ black metallic and beige. The light from numerous LED lamps falls on features such as a kitchen whose fitted implements are shining examples in stainless steel fronts, including a dishwasher.

The hot-water central heating regulates the underfloor heating with different zones in the living room, bathroom and bedroom. The cab of the Actros is not only fully insulated; it also boasts underfloor heating. Holidaymakers on the luxury yacht on wheels can store 500 l of diesel fuel and freshwater respectively plus 100 l of gas. There is also a generous electrical supply, with a capacity of 750 Ah plus a power inverter rated at 3500 W.

Beneath the wall unit and the transversely positioned double bed in the tail end there is room for a passenger car. Above this there is a large compartment featuring a bicycle garage with a lift so that shorter excursions can be undertaken too. A door lock with fingerprint security ensures that the occupants of the Centurion 1200 are not disturbed.

The platform for the Concorde Centurion 1200 is the Mercedes-Benz Actros 2542 L. Its six-cylinder in-line engine with a displacement of 12.8 litres delivers an output of 421hp, which is generous given the permissible GVW of 26 t.

Both of the ultimate super-class land-going yachts plus further luxury camper vans on truck and coach chassis from Mercedes-Benz can be admired along with many other camper vans until tomorrow at the Caravan Salon in Dsseldorf, the worlds biggest trade fair for leisure vehicles.

Die Stars des Salons  Reisemobile der Superlative auf Basis von Mercedes-Benz Antos und Actros auf dem

http://www.therakyatpost.com/motoring/2015/09/05/superlative-camper-vans-based-on-the-mercedes-benz-trucks-at-the-caravan-salon-2015-in-dusseldorf/

Best Hip Hop Dance Songs


Did You Know?The initial hip hop songs started out by the artists dubbing over reggae music. They were rhymes set to beats, and a new form of dance moves emerged, to groove to this funky music genre.

Hip hop music involves rapping, looping, freestyle rap, scratching, DJing, beatboxing (vocal percussion), and sampling. Plus, it is undoubtedly incomplete without hip hop dance. The music started out with only breakdancing/b-boying, but now includes locking, popping, and krumping as well. Overall, the music and dance emerged as a means of expression of the African-Americans, and became popular in the 1970s. Today, over 40 years after the evolution of hip hop dance, new styles are born everyday with a multitude of reality shows focusing on the best dance acts in the world.

There are various subgenres and fusions with different genres in hip hop music. The following list of songs have unique elements of such genres along with hip hop genre. Go through the list of best hip hop dance songs that we have come to love today.

Top 50 Hip Hop Dance Songs (2012 and 2013)

Thrift Shop, 2012

Macklemore & Ryan Lewis ft. Wanz

Album - The Heist

Genre - Alternative hip hop

Bitches Love Me, 2013

Lil Wayne ft. Drake and Future

Album - I Am Not a Human Being II

Genre - Hip hop

Diamonds, 2012

Rihanna

Album - Unapologetic

Genre - Electronic, Soul, Pop

Poetic Justice, 2013

Kendrick Lamar

Album - good kid, m.A.A.d city

Genre - Hip hop

F**kin Problems, 2012

A$AP Rocky ft. Drake, 2 Chainz, and Kendrick Lamar

Album - Long.Live.A$AP

Genre - Hip hop

Battle Scars, 2012

Guy Sebastian ft. Lupe Fiasco

Album - Armageddon and Food & Liquor II: The Great American Rap Album, Pt. 1

Genre - Hip hop and R&B

I'm Different, 2012

2 Chainz

Album - Based on a T.R.U. Story

Genre - Hip Hop

Clique, 2012

Big Sean, Jay-Z, and Kanye West

Album - Cruel Summer

Genre - Hip hop

Ball, 2012

T.I. ft. Lil Wayne

Album - Trouble Man: Heavy Is the Head

Genre - Southern hip hop and Bounce

Love Sosa, 2012

Chief Keef

Album - Finally Rich

Genre - Hip hop

Bandz a Make Her Dance, 2012

Juicy J ft. Lil Wayne and 2 Chainz

Album - Stay Trippy

Genre - Southern hip hop, Crunk, Dirty rap

Remember You, 2012

Wiz Khalifa ft. The Weeknd

Album - O.N.I.F.C.

Genre - Alternative hip hop, Pop rap, and PBR&B

Guap, 2012

Big Sean

Album - Hall of Fame

Genre - Hip hop

Pop That, 2012

French Montana ft. Rick Ross, Drake, and Lil Wayne

Album - Excuse My French

Genre - Hip hop

Never End, 2012

Future ft. Kelly Rowland

Album - Pluto

Genre - Hip hop and R&B

Who Booty, 2012

John Hart ft. iamSU

Album - Who Booty

Genre - Hip hop and R&B

Wild for the Night, 2012

A$AP Rocky ft. Skrillex and Birdy Nam Nam

Album - Long.Live.A$AP

Genre - Hip hop

Swimming Pools (Drank), 2012

Kendrick Lamar

Album - good kid, m.A.A.d city

Genre - Hip hop

Bitch, Don't Kill My Vibe, 2012

Kendrick Lamar

Album - good kid, m.A.A.d city

Genre - Hip hop

Money Trees, 2012

Kendrick Lamar ft. Jay Rock

Album - good kid, m.A.A.d http://www.scoop.it/t/g-by-cora-luna/curate city

Genre - Hip hop

Same Love, 2012

Macklemore and Ryan Lewis ft. Mary Lambert

Album - The Heist

Genre - Hip hop and R&B

We in This Bitch, 2012

DJ Drama ft. Future, Young Jeezy, T.I., and Ludacris

Album - Quality Street Music

Genre - Hip hop

Can't Hold Us, 2012

Macklemore and Ryan Lewis ft. Ray Dalton

Album - The Heist

Genre - Hip hop

Representin', 2012

Ludacris ft. Kelly Rowland

Album - Ludaversal

Genre - Hip hop and R&B

PMW (All I Really Need), 2013

A$AP Rocky ft. Schoolboy Q

Album - Long.Live.A$AP

Genre - Hip hop

Hate Bein' Sober, 2012

Chief Keef ft. 50 Cent and Wiz Khalifa

Album - Finally Rich

Genre - Hip hop

Young & Gettin' It, 2012

Meek Mill ft. Kirko Bangz

Album - Dreams and Nightmares

Genre - Hip hop

Backseat Freestyle, 2013

Kendrick Lamar

Album - good kid, m.A.A.d city

Genre - Hip hop

Fashion Killa, 2013

A$AP Rocky

Album - Long.Live.A$AP

Genre - Hip hop

My Life, 2012

50 Cent ft. Eminem and Adam Levine

Album - Street King Immortal

Genre - Alternative hip hop

Gangnam Style, 2012

PSY

Album - PSY 6 (Six Rules), Pt. 1

Genre - K-pop

Do My Dance, 2012

Tyga ft. 2 Chainz

Album - Well Done 3

Genre - Pop rap

No Worries, 2012

Lil Wayne ft. Detail

Album - Dedication 4

Genre - Hip hop

Ali Bomaye, 2012

The Game ft. 2 Chainz and Rick Ross

Album - Jesus Piece

Genre - West Coast hip hop

Show Out, 2013

Juicy J ft. Young Jeezy and Big Sean

Album - Stay Trippy

Genre - Hip hop and R&B

She Hates Me, 2012

Big Boi ft. KiD CuDi

Album - Vicious Lies and Dangerous Rumors

Genre - Hip hop

Wildside, 2012

T.I. ft. A$AP Rocky

Album - Trouble Man: Heavy Is the Head

Genre - Hip hop and Gangsta rap

Ready, 2013

Fabolous ft. Chris Brown

Album - Loso's Way 2: Risen to Power

Genre - Hip hop

Come and Get It, 2013

T-Pain ft. Ace Hood and Busta Rhymes

Album - (Promo Single)

Genre - Hip hop

Dope, 2013

Tyga ft. Rick Ross

Album - Hotel California

Genre - Hip hop

Dive, 2012

Usher

Album - Looking 4 Myself

Genre - R&B, Ballad, and Pop

Don't Stop the Party, 2012

Pitbull ft. TJR

Album - Global Warming

Genre - Dance-pop, Eurodance, and House

Rockin' With You, 2012

Chris Rene

Album - I'm Right Here

Genre - R&B and Urban pop

I Don't Really Care, 2012

Waka Flocka Flame ft. Trey Songz

Album - Triple F Life: Fans, Friends & Family

Genre - Hip hop

Starships, 2012

Nicki Minaj

Album - Pink Friday: Roman Reloaded

Genre - Eurodance and Europop

Wicked Games, 2012

The Weeknd

Album - Trilogy

Genre - PBR&B

Long Live A$AP, 2012

A$AP Rocky

Album - Long.Live.A$AP

Genre - Hip hop

Celebration, 2012

Game ft. Chris Brown, Tyga, and Wiz Khalifa

Album - Jesus Piece

Genre - Hip hop

Best Hip Hop Dance Songs of All Time

Sexy Bitch, 2009

David Guetta ft. Akon

Album - One Love

Genre - Dance-pop and Electro house

Memories, 2010

David Guetta ft. KiD CuDi

Album - One Love

Genre - Hip house

U Can't Touch This, 1990

MC Hammer

Album - Please Hammer, Don't Hurt 'Em

Genre - Hip hop

I'll Be Missing You, 1997

Puff Daddy ft. Faith Evans and 112

Album - No Way Out

Genre - Hip hop and R&B

Gold Digger, 2005

Kanye West ft. Jamie Foxx

Album - Late Registration

Genre - Hip hop

Nuthin' but a 'G' Thang, 1992

Dr. Dre ft. Snoop Dogg

Album - The Chronic

Genre - West Coast hip hop, G-funk, Gangsta rap

C.R.E.A.M., 1994

Wu-Tang Clan

Album - Enter ther Wu-Tang (36 Chambers)

Genre - Hardcore hip hop and East Coast hip hop

Get Ur Freak On, 2001

Missy "Misdemeanor" Elliott

Album - Miss E... So Addictive

Genre - Hip hop, Dance, and Bhangra

Hot in Herre, 2002

Nelly

Album - Nellyville

Genre - Hip hop

Hate It or Love It, 2005

The Game ft. 50 Cent

Album - The Documentary

Genre - West Coast hip hop and Contemporary R&B

Sing for the Moment, 2003

Eminem ft. Steven Tyler

Album - The Eminem Show

Genre - Hip hop and Rap rock

Dear Mama, 1995

2Pac

Album - Me Against the World

Genre - Hip hop and R&B

Love the Way You Lie, 2010

Eminem ft. Rihanna

Album - Recovery

Genre - Hip hop and Pop

Hey Ya!, 2003

OutKast

Album - Speakerboxxx/The Love Below

Genre - Alternative hip hop

Fiesta (Remix), 2001

R. Kelly ft. Jay-Z and Boo & Gotti

Album - TP-2.com

Genre - Latin hip hop, Urban pop, R&B, and Dirty rap

Who's That Girl?, 2001

Eve

Album - Scorpion

Genre - Hip hop and Dance-pop

SexyBack, 2006

Justin Timberlake

Album - FutureSex/LoveSounds

Genre - Hip hop, R&B, and Electropop

Winner, 2010

Jamie Foxx ft. T.I. and Justin Timberlake

Album - Best Night of My Life

Genre - Hip hop and R&B

Ayo Technology, 2007

50 Cent ft. Justin Timberlake and Timbaland

Album - Curtis

Genre - Hip hop and Dirty rap

Work It, 2003

Nelly ft. Justin Timberlake

Album - Nellyville

Genre - Hip hop, R&B, and Pop rap

Regulate, 1994

Warren G ft. Nate Dogg

Album - Regulate... G Funk Era

Genre - West Coast hip hop and G-funk

Boom Boom Pow, 2009

The Black Eyed Peas

Album - The E.N.D.

Genre - Hip hop and Electro

Beep, 2006

Pussycat Dolls ft. will.i.am

Album - PCD

Genre - Hip hop and Pop

T.H.E. (The Hardest Ever), 2011

will.i.am ft. Mick Jagger and Jennifer Lopez

Album - #willpower

Genre - Hip hop and Electro house

Belly Dancer (Bananza), 2005

Akon

Album - Trouble

Genre - Hip hop and R&B

I Know What You Want, 2003

Busta Rhymes and Mariah Carey ft. Flipmode Squad

Album - It Ain't Safe No More...

Genre - Hip hop and R&B

Ridin', 2006

Chamillionaire ft. Krayzie Bone

Album - The Sound of Revenge

Genre - Southern hip hop and Gangsta rap

Let's Get it Started, 2004

The Black Eyed Peas

Album - Elephunk

Genre - Hip hop

Check It Out, 2010

will.i.am ft. Nicki Minaj

Album - Pink Friday

Genre - Hip hop and Dance-pop

Smack That, 2006

Akon ft. Eminem

Album - Konvicted

Genre - Hip hop, R&B, and Dirty rap

Don't Cha, 2005

Pussycat Dolls ft. Busta Rhymes

Album - PCD

Genre - Hip hop, R&B, and Pop

Let Me Blow Ya Mind, 2001

Eve ft. Gwen Stefani

Album - Scorpion

Genre - East Coast hip hop and R&B

Miami, 1998

Will Smith

Album - Big Willie Style

Genre - Hip hop and Disco

Right Now (Na Na Na), 2008

Akon

Album - Freedom

Genre - Dance-pop, R&B, and Electropop

Put It On Me, 2000

Ja Rule

Album - Rule 3:36

Genre - Hip hop and East Coast hip http://www.guidetogaragedoorrepair.com/ hop

Oochie Wally, 2001

Nas and Bravehearts

Album - Nas & Ill Will Records Presents QB's Finest

Genre - Hip hop and Dirty rap

There It Go (The Whistle Song), 2005

Juelz Santana

Album - What the Game's Been Missing!

Genre - Hip hop

Drop It Life It's Hot, 2004

Snoop Dogg ft. Pharrell

Album - R&G (Rhythm & Gangsta): The Masterpiece

Genre - Hip hop

Ms. New Booty, 2005

Bubba Sparxxx ft. Ying Yang Twins and Mr. Collipark

Album - The Charm

Genre - Hip hop and Southern rap

Salt Shaker, 2003

Ying Yang Twins ft. Lil Jon and The East Side Boyz

Album - Me & My Brother

Genre - Hip hop and Crunk

Even though the list is limited, you can help us keep it going. Leave a comment below and let us know what are your favorite hip hop songs to dance to.

http://www.buzzle.com/articles/best-hip-hop-dance-songs.html

Jamming systems play secret role in Iraq


(CNN) -- A silent, invisible battle is being fought against roadside bombs in Iraq. Though the military doesn't like to advertise their use, electronic jamming systems are playing a key role in neutralizing the threat.

art.ied.conovy.hit.afp.gi.jpg

Smoke billows from tires of a U.S. military truck hit by an IED near the Iraqi-Syrian border in October 2005.

"Any weapon we had against IEDs, [improvised explosive devices] was utilized including jamming technology," said Jason Spencer, 29, an Oklahoma City, Oklahoma, engineer who served with the Army in Iraq in 2005.

Vehicle mounted electronic jammers attempt to block a signal going to a radio-controlled IED. The military also uses portable backpack jammers.

"The sophistication of IEDs definitely increased during my time in Iraq," said Spencer. "There was a definite increase in remote detonation."

A signal going to a remote-controlled IED operates on a radio or infrared frequency.

Jamming devices, known as Counter Radio Controlled double garage door Improvised Explosive Device Electronic Warfare, or CREW systems, attempt to intercept or block a signal before it reaches its intended target, preventing detonation.

One common method is barrage jamming, which knocks out a broad range of radio signals. However, it also knocks out communications used by U.S. troops putting them at increased risk.

"Ideally what you want to be able to do is have something that can grab very precise signals, capture the signals and render them irrelevant without knocking out your own communication," said CNN military analyst retired Army Brig. Gen. James "Spider" Marks.

These technologies represent the last line of defense, Marks said. "We don't want to give our potential enemies an understanding of what we are doing to counter their efforts," he said.

Military JargonCREW: Counter Radio Controlled Improvised Explosive Device Electronic Warfare

DoD: Department of Defense

IED: Improvised Explosive Device

JIEDDO: Joint Improvised Explosive Device Defeat Organization

Source: The Department of Defense

Along with jammers, troops use air surveillance, robots, blast-resistant vehicles and mine rollers as countermeasures. PhotoSee counter-IED technologies in Iraq

IEDs are the No. 1 source of U.S. and alllied casualties in Iraq, according to the Department of Defense. From July 2003 to July 2007, 1,565 coalition forces were killed by IEDs, according to iCasualties.org. See the casualty toll inflicted by IEDs

"We dealt with hundreds of IEDs while in theater," said Spencer. "IEDs were always on our minds during every patrol."

Spencer says IEDs come in a variety of shapes and sizes. "From a simple mortar round on the side of the road with a fuse and a wire running to a push-button, to complex explosives poured into concrete (shaped like curbs) with remote detonators and booby traps."

Most roadside bombs are remotely detonated using common household devices: cell phones, garage door openers, burglar alarms, key fobs, doorbells, or remote controls for toy cars. Learn more about the IED threat

"Our enemy hides in plain sight. He buys his bomb parts in stores. It's standard commerce," said Marks.

U.S. forces are dealing with an adaptive, innovative and flexible enemy, according to the Joint Improvised Explosive Device Defeat Organization, or JIEDDO, which is leading the counter-IED effort for the military.

As insurgents modify their devices to outwit the the garage door company military, the military in turn adapts its own jamming technologies.

Many companies have been tapped to supply jammers to coalition forces. JIEDDO is interested in technologies that can be used in the field within two to eight months -- "light speed" in Defense Department terms.

The Army's main CREW system is the Warlock Duke, a vehicle- mounted radio jammer developed by Syracuse Research Corporation. It's capable of jamming most radio-controlled IEDs, according to the Pentagon.

The Navy, which oversees the CREW program, contracted BAE Systems to produce 3,800 wearable jammers to be fielded in Afghanistan and Iraq in 2008.

Canadian firm Med-Eng is building jammers http://www.allprodoor.com/ for the Marines, reports military contractor General Dynamics.

By the end of 2007, JIEDDO will have funded more than 30,000 jammers for Marine and Army units. They have spent $1.6 billion on jamming technology for this fiscal year.

"This gear saves lives every day," wrote retired Gen. Montgomery Meigs, director of the Joint IED Defeat Organization, in a column titled "On the Offensive: The Battle Against IEDs."

One in six IEDs causes casualties in Iraq, JIEDDO reports. To remain effective the enemy "must expose himself more and take higher risks to do his ugly work," Meigs said.

In January, the Government Accounting Office launched a review of JIEDDO and its efforts to counter IEDs. The Defense Science Board criticized the agency for focusing too much on defensive countermeasures "to which the enemy quickly adapts, making these efforts less effective," in an April 2006 report.

JIEDDO is fully cooperating with the GAO, said Col. Dewey Ford, director of strategic communications for JIEDDO. He added that Congress has long supported eliminating the IED threat.

JIEDDO said it is aggressively going after the bomb makers, working to destroy their networks. The agency acknowledges that the mission won't be achieved merely by technical means.

"The best way to counter the IED threat is through understanding the network that allows an IED to even be assembled," said Marks, who supports JIEDDO's work.

"I'd rather have the guy who is going to put that IED in place get killed long before he's even part of the network. And I don't want him to know how I found him out because I want to find out where all his buddies are and kill them too." E-mail to a friend E-mail to a friend

All About Iraq War Armed Forces Insurgencies

http://www.cnn.com/2007/TECH/08/13/cied.jamming.tech/

Garage Door Installation in Sharpsburg, GA


Even the most durable garage doors cannot escape the wear and tear that will eventually begin to plague all homeowners. While garage door repair is often an option, some homeowners would just rather http://www.broten.com/service-repairs/garage-door-service.html have their current garage doors replaced with new ones. That happened to be the case with this Sharpsburg, GA homeowner. This customer was in the midst of having upgrades done to his home. In the midst of the process, he recognized that having his old garage doors replaced would be a great investment for the look and feel of his home. He called us for an estimate, and soon https://delicious.com/alikeauger6764 enough we were at his home installing new insulated garage doors. Not only does this customer now have garage doors that look better, but he also has better insulation which helps keeps his home more comfortable and his energy bills lower year-round.

This Customers Reaction To Our Work

This Sharpsburg, GA customer contacted us because he had received one of our advertisements in the mail. Recognizing that he needed to do something about his 20-year-old garage doors, he called us for an estimate. This customer was quite satisfied with our competitive pricing, and he decided to hire us for the job. Once the new insulated doors and new garage door opener were installed, our customer was very impressed with the work we did. He was also thankful that he no longer had to manually open and close his garage door every time he needed to get in and out.

Other Work We Performed For This CustomerWe wanted https://www.diigo.com/user/wryneophyt088 him to enjoy every minute with his new garage doors!

From Newnan to Sharpsburg and beyond, we at Davis Garage Doors are always striving to make sure that our customers walk away completely satisfied with everything the need to enjoy their new (or newly repaired) garage doors. The job we did for this customer was no exception. In addition to installing brand new insulated garage doors for this customer, he also asked us to install a brand new garage door opener. This customer had http://www.garagedoorseattle.com/services/garage-door-repair/ never experienced life with a garage door opener, and we were able to give him a taste of the freedom and convenience it brings. After 20 years of being without one, this customer was extremely happy to leave manual doors behind for good.

http://davisnewnangaragedoorrepair.com/garage-door-installation-in-sharpsburg-ga.html

DIY Resolution: Improve Home Security This Year


If youre looking for a DIY project to kick off the new year, why not make home security a top priority? Many people dont take security seriously until after a break-in. Get ahead of things this year with some of these simple fixes.

Landscaping

Criminals love to lurk in the shadows, and all those overgrown trees and shrubs in your yard might make your house http://www.yellowpages.com/milwaukee-wi/garage-door-repair look like a prime target. By trimming back branches, especially those nearest to garage door rollers the house, youll eliminate potential hiding spots. While a tidy yard can help eliminate some hiding places, you probably dont want a completely barren lawn. So illuminate areas around the trees and bushes that you leave behind with a few strategically place flood lights.

Reinforce Your Doors

A weak door can be felled with a few swift kicks or a twist of a crowbar. Add a layer of protection to your entryways by reinforcing your doors. These simple screw-on improvements can make your door impervious to heavy-footed criminals. A door guard plate will strengthen the door itself, and a door jam reinforcement perhaps the best single improvement you can make replaces a soft pine door frame with a solid steel inset. If youre like to take it a step further, you can also replace an old wooden door with a solid steel security door.

Protect the Garage

Youre only as secure as the weakest link, and for many people thats the garage. Many people make the mistake of leaving their garage door openers in their cars. If you park your car on the street, criminals only have to smash open a car window to get into your garage. One way to prevent this is to install a wifi-enabled garage door opener like the LiftMaster Internet Gateway or the Garageio, which allow you to use your phone a device youre not likely to leave behind in your car as the clicker. These devices also allow you to see if youve mistakenly left the door open and close it from anywhere you have a internet connection, giving http://www.garagedoorsofamerica.com/gdarequest.aspx you peace of mind when youre away.

Strengthen Your Windows

Windows are another common entry point for burglars. A brick or length of pipe will make swift work of most windows, unless you protect it with a smash-proof coating. A protective film, like 3Ms Safety and Security Window Films, isnt very difficult to install the film goes on like a giant sticker for your window. When a brick-wielding thief comes by looking for an entrance, he might be able to crack the pane, but the film will continue to hold the glass in place, barring entry. As an added benefit for those that live in areas prone to hurricanes or tornadoes, these coatings will add a line of defense against extreme weather a home security win-win.

Install Security Cameras

Security cameras are nothing new, but a new generation of devices allow you to get a live feed on your phone or tablet, which means you can quickly check in or your home if you get an alert from your security company or a neighbor calls you to report suspicious activity nearby. These devices can catch home invaders in the act, but also garage door weather stripping petty thieves that steal packages off your front door step. If you decide to install a security camera, get one thats motion activated like the Belkin NetCam or the Dropcam Pro. These cameras can send an alert to your phone when they sense sound or motion nearby, allowing you to quickly respond to potential threats and sparing you the tedious task of reviewing hours of security footage if a package goes missing or someone attempts a break-in.

http://www.foxnews.com/leisure/2014/01/02/diy-resolution-improve-home-security-this-year/

Liftmaster 371lm Garage Door Remotes


Programming your Liftmaster remote is relatively easy. The best place to start is by looking on the back of your Chamberlain Liftmaster 371LM remote. Here you will see a label with the clicker's information. The main item that we are looking for is the model number which is indicated by the "Chamberlain". Note that in Canada, it might say 371LMC, or if you have an accessmaster 371AC remote, it will indicate 371AC. The only differences between these models are in the name. Functionally they are identical.

The first letter in the model number will indicate the series. The 3 in this case indicates Chamberlain Liftmaster's newest Security+ ERT line. Note that this should not http://en.wikipedia.org/wiki/Garage_door be confused with the original security plus line as they operate on different frequencies and are thus incompatible. Any model number of remote that begins with this 3 will be compatible with other remotes, keypads, or keychains in this series.

The last number in the model number indicates the type of remote. A Liftmaster 370LM, for example, indicates that it is a keychain remote. The Liftmaster 371LM is the one button configuration of transmitter. The 372LM, 373LM, and 374LM each add a button to their configuration. The 376LM and 377LM are wireless keypads. The number on the top left of the label indicates internal part codes. The number used on most 371LM remotes is IC: 2666A 1573.

The number on the top right is the date of manufacture and is indicated in a format such as 06/07. The FCC ID is the number at te bottom of the remote and is often indicated by FCC ID: HBW1573. This number is shared by multiple models of remote so it garage door repair houston should not be used to determine compatibility with the https://repairgaragedoors.com/ Chamberlain Chamberlain Liftmaster 371LM line of remotes. The last code in on the text on the left most side and is 132C2000-7. This simply indicates the regulations quoted as required by the FCC.

Once you know which remote that you will need, you will need to program your Liftmaster 371LM remote. To program the 371LM, press the purple button on the back of the logic board. Right afterwords, press the black button on the 371LM clicker. If everything went well, your new remote should be fully functional with your garage door opener.

The Liftmaster 371LM should last for years without any maintenance. If any is needed, it is usually due to a dead battery. This can be easily fixed by inserting a screwdriver into the side panel to pry in into two pieces. You can then replace the button cell battery. This battery can be found at most supermarkets and hardware stores. For any other problems, it is almost always easier to buy a new garage door remote than to try and fix an old one.

By: FastSubmitArticles.com

Article Directory: http://www.articledashboard.com

Karen Stark has been in the Access Control industry for 5 years and manages customer support for TD Supplies. She is available by email via her website to answer all questions about the Access Control industry including questions about Garage door remotes and Proximity Cards.

http://www.articledashboard.com/Article/Liftmaster-371LM-Garage-Door-Remotes/677746

This Kids' Toy Can Hack Garage Doors in Seconds


All it takes to hack and open some remotely-controlled garage doors is a slightly modified pink texting toyand less than ten seconds.

Thats according to Samy Kamkar, a well-known hacker, who claims to have found a way to open all remotely-controlled garage doors from certain manufacturers with a modified and outdated wireless texting toy marketed specifically at girls that can be bought on Amazon or eBay for less than $50.



The toy, a Mattel Radica Girltech IM-ME, comes with a radio frequency (RF) chip, an LCD display, backlight and keyboardall the equipment we need to pull off the attack, Kamkar wrote in a detailed post about his new research.

We could have built our own device, Kamkar wrote, but the beauty of this is that it's all already packaged up for you, inexpensive, and is my favorite color.

A two-character password on a website is more secure than most garages.

With some modifications, the toy can be programmed to transmit all possible combinations to unlock popular garage doors made by http://www.garagedoorrepairexperts.com/ manufacturers like Nortek and North Side, which have fixed pin codes, according to Kamkar. These garage doors are trivial to crack because some of their door opener devices only accept 12 bits combinations, which means there are only 4096 possible combinations.

A two-character password on a website is more secure than most garages, Kamkar said in a video explaining the hack.

To rig the toy, Kamkar used a device made by another security researcher, which allowed him to reprogram the Radica Girltech IM-ME.

The result is a rigged toy that takes less than ten seconds to unlock a garage door, as you can see in the video.

Kamkar called this attack OpenSesame and he even released the code that he wrote for it on GitHub. The code, however, is slightly modified so that it cant be reproduced and abused by criminals.

It almost works, but just not quite, and is released to educate, Kamkar wrote. If you are an expert in RF and microcontrollers, you could fix it, but then you wouldn't need my help in the first place, would you.

The good news is that newer garage door receivers garador use rolling codes and are not vulnerable to the OpenSesame attack, according to Kamkar, who also released another video explaining how to figure out if your garage door is vulnerable and what to do to protect against attacks like this.

The bad news is that for many garage doors, all it takes is a seemingly innocent pink toy.

http://motherboard.vice.com/read/this-kids-toy-can-hack-garage-doors-in-seconds

Turning Your Carport Into A Garage Is Simpler Than You Imagine


Coping with a sunny climate has many benefits besides not having to deal with lengthy, dark, snow stuffed winter months. You do not need to be concerned about the automobile not starting due to chilly temperatures, nor do you need to shovel the drive prior to going to work.

A desert atmosphere does not necessarily make a fully enclosed garage as much of a requirement as back east. There are some benefits as people are beginning to recognize.

The benefits to getting an enclosed garage include some of the obvious ones such as, your car being protected from the sun or staying cleaner as it is out of the wind. It also makes your automobile more protected against thievery and criminal damage.

An additional benefit that might not turn out to be apparent until you've issues, is keeping those pesky desert packrats from creating a house under your hood as well as worse, from chewing up the wires inside your automobile. The damage a packrat can do isn't only annoying, but very expensive to repair.

Carports do not offer a lot within the way of additional storage. An enclosed garage gives you options for storage cabinets, locations on the walls to hang tools or other bulky items, as well as a laundry room. All of these items are now secure and hidden from view.

An essential factor to think about http://www.homeadvisor.com/cost/garages/repair-a-garage-door/ for your new garage is that you may need to be certain the nearby zoning code permits for a conversion. Following your confirmation that it's allowed, you have an opportunity to design it to looks much more like an extension to your home.

You will need to make sure the carport is of large enough size worth transforming into a garage. If it's too small you will have a hard time moving around the vehicle once there are walls. Incorporating windows will keep it from appearing box-like along with a decorative garage door is really a plus for creating it attractive.

You'll want to think about adding power so you've overhead lights, and if you are thinking of an automatic garage door opener you should have a sectional garage doors separate circuit breaker. If you're going to make use a component of the garage as a laundry room then you'll need to add plumbing along with a sewer connection. Consider a side door to access your yard.

If your carport has a pre-existing concrete slab, it's important to make sure the depth is sufficient to assure utilizing it within the garage. Usually a 4 inch thick slab is the minimum.

If your carport doesn't lead into the home, you might want to consider creating the garage in a various location so you can go directly from parking the car inside towards the house. If the garage is connected towards the home, you'll need to fireproof the adjoining walls.

A carport transformation can be simple or complex, the important http://www.localgaragedoor.org/ aspects to keep in mind are in the event the existing carport and slab are suitable as is, and if the transformation is permitted by the zoning code exactly where you live. After those essential considerations, it comes down to making the garage as an appealing and well-designed addition for your house.

About the Author:

Are you interested in finding help for your kitchen remodeling Tucson project? If you are looking for more, we've got the solutions for all of your remodeling Tucson home projects.

https://www.goodreads.com/user_status/show/73010876 href='http://www.articlesnatch.com/blog/Turning-Your-Carport-Into-A-Garage-Is-Simpler-Than-You-Imagine/2786891'>http://www.articlesnatch.com/blog/Turning-Your-Carport-Into-A-Garage-Is-Simpler-Than-You-Imagine/2786891

3-year-old killed by garage door: Young girl pinned and does not survive - Minneapolis Top News


Sadly, a 3-year-old was killed by a garage door in Waldorf, Md. on Friday. The accident happened around 4 p.m. and WTOP reported the details about the tragic accident on April 5.

The name of the little girl has not been released. Authorities say that she was playing with wayne dalton garage doors the garage door opener Friday afternoon when the door closed on her. The door did have sensors, but clearly they did not prevent the young girl from being crushed.

There were people inside the house when the accident happened, and an adult heard the door close and went to check on the girl within minutes. The 3-year-old killed by the garage door was pinned with the door on her back, and she was pronounced dead at the hospital.

The Washington Post says https://repairgaragedoors.com/ that preliminary details indicate the girl may have died from asphyxiation, but an autopsy is schedule. Investigators are not sure how she ended up under the door, but they believe she may have pushed the control button http://www.dgdoors.com/garage-door-repair/ and tried to run out under the door.

Regardless of how the young girl came to be under the door, or why the sensors did not manage to stop the door from pinning her, a family is surely devastated. The investigation into the details that led to the 3-year-old being killed by the garage door continues.

http://www.examiner.com/article/3-year-old-killed-by-garage-door-young-girl-pinned-and-does-not-survive

Home Improvement :: About urbane wind turbine investment (Page 1 of 3)


About urbane wind turbine investment

These costs consist of: complete UWT installation including the engineering, safety measures, monitoring, supporting construction, transport and mounting, proof of operation (commissioning) and the acceptance. Likely additional costs will arise from:

feasibility studies, location selection, structural assessments (if mounting the turbine on a building), obtaining permits and project management. In order to at least partially compare the investment costs of the different turbines, the cost per kW installed has been calculated. The figure provided is the result of: (total investment - remaining value after 10 years) / nominal capacity.

The remaining value has been estimated as 20% of the investment for all turbines except for Ropatec. This is because the manufacturer of Ropatec guarantees to buy back his turbine after ten years for a fixed price. However, it should be noted that all costs are estimates at the https://www.goodreads.com/user_status/show/71153369 time of publication and could change.

Also, all calculations are only indicative, as the separately charged costs cannot be estimated and the performance figures provided by the suppliers and manufacturers have not been verified in practice. Therefore, although these figures provide a rough guide to costs, further investigation on an individual project basis is necessary.

4.1.2 Periodic costs

The periodic costs include maintenance, part replacements, transport costs related to the on-site work, the possible insurance costs (including the third party damage liability), the costs of any equipment replacements and the cost of a complete check of the system after 10 years of operation. Again, these costs have been estimated on the basis of information from suppliers and manufacturers and should be treated as indicative costs only.

4.2 Benefits

4.2.1 Financial incentives

The financial incentives available differ between the Netherlands and the UK. The Netherlands: E.I.A. Energy Investment Deduction for profit-making organisations: it is possible to obtain the E.I.A. with a maximum of 5000 per turbine for turbines with a nominal power

M.E.P. Electricity Generation Environmental Quality: applies to the total energy generated by a renewable energy installation. The level of the M.E.P. subsidy per kWh is set by the http://www.ehow.com/how_2313157_repair-garage-doors.html government and laid out in the Ministerial grant scheme regulation.

UK: A grant can be obtained from the Low Carbon Building Programme (LCBP) in the UK, to cover up to 50% of the installation cost. Some provinces and municipalities provide additional subsidies as a part garage door threshold of their own renewable energy development programmes. Most commonly these subsidies are a part of local measures against climate change and are usually reconsidered yearly.

4.2.2 Savings through using of the generated electricity

Using the electricity generated at the location means direct savings for the owner through a lower electricity consumption bill. The savings depend on the http://www.homeadvisor.com/cost/garages/repair-a-garage-door/ price paid to the electricity supplier by the consumer for electricity supplied from the grid. For example, the customers of the supplier ENECO in The Netherlands pay approximately 21 cents/kWh. In the UK, typical cost of electricity for flats and households can range from 11p to 16p/kWh. These prices depend very much on the time during the day (or night) when the electricity is used.



Page 1 of 3 :: First | Last :: Prev | 1 2 3 | Next



http://www.articlebiz.com/article/1051348181-1-about-urbane-wind-turbine-investment/

Home Improvement :: Coil Roofing Nailers..a Review


Pneumatic nailers and staplers are among the most dangerous construction tools used on jobsites, and can cause serious injuries to both the operator and workers nearby if used improperly. All workers should receive proper training on these tools, including instructions about compressor settings, hose connections, and fastening procedures, before being allowed to use them. And all equipment should be checked before use, carefully maintained, and removed http://www.charlotteoverheaddoors.com/ from service if there is any question about its safe functioning.

Here is a "Code of Safe Practices" that every employer should review with workers that use pneumatic tools.

Before You Start

* Only allow experienced, trained, and authorized workers to operate pneumatic nailers and staplers.

* Always wear safety glasses.

* Use hearing protection if working with noisy tools or in a restricted space.

* Inspect tools before connecting them to the air supply.

* Check that all tool mechanisms are attached.

* Tighten all screws securely.

* Ensure that all guards are in place.

* Check compressor and pressure settings before connecting tools.

* Check that tools are correctly and securely connected to the air supply hose, and that hoses are in good shape.

* Always handle a tool as if it's loaded with fasteners (nails, staples, etc.).

* Disconnect tools from the air supply during cleaning or adjustment. Before clearing any blockage or misfire, be sure that depressing the trigger empties all air and releases all pressure from the tool.

* Only use fasteners recommended by the manufacturer.

* Only permit properly trained people or manufacturers to carry out tool maintenance and service.

* Disconnect tools if left unattended. OSHA requires workers to stay within 25 feet of unattended tools, or disconnect them if farther away.

* Home

* Contact us

* Hitachi Nailer

* Nailer Bostitch

* Paslode Airless Gun

* Paslode Nailer

*

Coil Roofing Nailer

bosticdh rn46 nailer

Click image for best prices on all models

Coil roofing nailer ..a review

By Mike Guertin

Coil roofing nailers are the most abused tools on my jobsite. They withstand blistering rooftop heat under summer sun, take two-story high-dives onto frozen mud in winter, and endure constant grinding as I drag them across 10-grit shingle granules. And that doesnt even account for the grime that http://www.plurk.com/industriousallu60 builds up inside and outside the tools from working in this merciless environment. So, to say roofing nailers have a tough job is an understatement.

Test Criteria

I field-tested 11 nailersthe Bostitch RN46, Craftsman 18180, DeWalt D51321, Hitachi NV45AB2, Makita AN451, Max CN450R, Paslode 3175-RCU, Porter-Cable RN175A, Ridgid R175RNA, Senco 455XP, and Spotnails VRN45putting them through their turns fastening heavy laminated (aka architectural or dimensional) shingles in cold and moderate weather conditions. While I looked at operational functions (power and recoil, depth-of-drive adjustments, driver blades, and exposure gauges) and ergonomic and durability features (reloading nails, handling, and wear guards), it was power, recoil, and speed that mattered most. At the beginning, middle, and end of the day, I need a nailer that skips across shingles with minimal recoil and flush-drives every nailevery time.

The Driving Force

Power and Recoil. I dont have the gear to objectively test a nailers driving power, so I gauge it with my hammerthe more I have to take my hammer out of my loop to pound down proud heads, the more air pressure I know a nailer needs. Since all the tools in the test specify a pressure operating range of 80120 psi, I set my compressor with an output regulator to 100 psi. I then ran the tank at 110130 for constant air output, which leveled the playing field for all the nailers. Most of my roofs are sheathed with 5/8-inch AdvanTechan exceptionally garage door repair dense productand I typically install 35-year or better laminated shingles. Like most roofers, I position the shingles and bounce-nail across each course. My speed is greatly influenced by how fast a nailer cycles and how little recoil it has. To maintain top speed, I want little or no recoil so the tool skips across the surface rather than jumping after every nail.

The Max, Hitachi, Senco, DeWalt, Spotnails, Porter-Cable, and Bostitch all drove nails consistently with little recoil. The Makita and Ridgid were noticeably less powerful with medium recoil, leaving occasional proud nail heads. The Craftsman and Paslode needed more power for my roofs. Even with the depth-of-drive dialed to the max and the compressor regulated at 100 psi, the Craftsman couldnt set all the nails on a full row of shingles and the recoil was too strong while bump-nailing. The Paslode recoiled a little less but was also underpowered, and without a depth adjustment there was no way to increase drive depth to compensate.

Photo: David Sharpe

The nose-mounted depth-of-drive adjustment on the Bostitch is easy to dial-in.

Drivers. Drivers are among the most expensive replacement parts on a roofing nailer, and as they wear down nail heads dont set flat. The good news is that you can grind a driver two or three times before it becomes too short and needs replacing.

Learn more at the website in the resources below.



http://www.articlebiz.com/article/607118-1-coil-roofing-nailersa-review/

The Antwerp Diamond Center Heist


Antwerp Diamond Heist Was Biggest in HistoryThe Diamond District in Antwerp, Belgium is the site of approximately 80% of all diamond transactions in the world. Covering only about three blocks and containing numerous office buildings and shops specializing in various gem services, the Diamond District benefits from almost impenetrable security; streets are blanketed with constant surveillance, and the area is cordoned off by retractable stone pillars. It's rumored that even the Mafia turned down the chance to pull a heist there because the security was simply too good. But on Valentine's Day weekend in 2003, thieves managed to do the seemingly impossible: They made off with half a billion dollars in loot using neither weapons nor violence, but only their brains, endless patience, and a few simple tools.

Casing the Antwerp Diamond http://www.aladdindoors.com/garage-door-repair Center

One of several office blocks in the district, the Antwerp Diamond Center was chosen for the heist because even though its security was formidable, the thieves thought there might be chinks in the armor that could be exploited. Leonardo Notarbartolo, an Italian jewelry designer and merchant as well as a criminal, traveled to Belgium and rented an office in the Antwerp Diamond Center, posing as a legitimate businessman. Had the building superintendent thought to check Notarbartolo's background, she might have discovered the man's long criminal record in Italy. But his references were not checked, one of several lucky breaks the thieves would enjoy.

Notarbartolo spent over two years pretending to work in his office in the center. Using a bag concealing a camera, he filmed the relevant parts of the building, including the vault and the various security measures. He took copious notes about employee schedules, brand names of locks and safes, and the building layout, even managing to get a copy of the blueprints. Periodically, he would take the information back to Italy and show it to his loose group of confederates, known as the School of Turin. Over the course of two years, the videos and information supplied by the inside man helped the gang work out ways around each of the building's security measures.

Stealing Half a Billion Dollars

In the middle of the night on February 15, 2003, the group entered through the garage of the Antwerp Diamond Center using a remote control they'd made after utilizing a frequency detector to home in on the garage opener's code. The garage faced the outside of the district, which was only sparsely covered by video surveillance. The basement vault, containing almost 200 safety deposit boxes used by merchants with offices in the building, was protected by a foot-thick steel door with a key lock, a combination, and a magnetic alarm. A few days before the heist, a member of the gang posing as a workman had disabled the magnetic alarm. Notarbartolo, from his two years "working" in the building, knew where to find the key, but had apparently never managed to discover the vault's combination. Luck was with the thieves again, though; whoever had locked the vault for the weekend had neglected to "scramble" the combination after closing the door, so the key alone gave the thieves access to the untold riches within.

Inside the Vault

The gang disabled the light, motion and heat sensors using cheap but ingenious methods clear hairspray, electrical tape, a block of styrofoam on a broom handle. The vault was also equipped with seismic detectors that would be set off by drilling or by someone trying to tunnel into the vault through the concrete. But these thieves didn't need to drill into the safety deposit box doors because they'd had a machinist make them a specialized tool that would pry most of the boxes open quite handily.

More Loot Than They Could Carry

The safety deposit boxes were so stuffed with riches that the thieves simply left a great deal of it scattered on the floor because it was too much for them to take. They focused on loose diamonds, cash in various currencies, and gold bars; they left behind distinctive pieces of jewelry that could be easily identified, as well as less valuable gemstones. Estimates vary, but it's thought that the value of cash, gold and gems stolen amounted to between 100 and 400 million euros (about half a billion dollars), making it the largest heist in history.

Catching the School of Turin

Before leaving the building, the thieves stole the security tapes recording the night's adventures. They exited through the garage with their bags of loot, attracting no attention whatsoever in the deserted district. After meeting briefly to sort out their take, they filled several bags with trash, including clothes and tools from the heist, destroyed security tapes, less common paper currencies that might arouse suspicion when exchanged, and even a few cheap emeralds. The trash bags were dumped in a remote patch of forest as garage door opener one of the gang members drove out of Belgium.

The thieves' luck had finally run out. The forest was patrolled by an obsessive caretaker, who happened upon the trash bags less than 48 hours after the robbery. The presence of gems and currency in the garbage tied it to the heist, and from DNA evidence gleaned from champagne bottles and other household trash mixed in with the discards from the heist, police were able to identify four of the thieves, including Notarbartolo. All were eventually jailed, but have since been released. Other members of the gang have never been identified or apprehended, and the loot has never been recovered.

Source:

Selby, Scott Andrew, and Greg Campbell. Flawless: Inside the Largest Diamond Heist in History. New York: Union Square, 2010. Print.

http://www.suite101.com/content/the-antwerp-diamond-center-heist-a331309

A Guide To The Benefits Of Installing Overhead Garage Door In Okc


Wondering why should you consider installing an advanced garage door? The reasons can be many, but one of the prime benefits of installing an advanced and automatic garage door is that it makes the operation of the same simple. When it comes to installing a garage door, it is recommended to opt for overhead garage doors in OKC. Installing an overhead door not only gives a new look to the exterior of your house, but also helps you to be sure of making no mistake while operating the garage door. The inbuilt springs makes it easier to lift the door.

When it comes to choosing your garage door, you should make the choice carefully. The catch lies in choosing something http://www.americangaragedoors.com/garage-door-repairs/ that best caters to your interest. From wooden to steer doors, you can find a number of designs at offer by the top service/product providers. While natural look and affordability has made wooden doors a popular choice among garage owners, steel doors are also gaining popularity with time owing to its durability. However, to ensure making the best choice, you should always buy from providers offering good after sales service including repairs and maintenance. A reputed garage door provider also offers garage parts in Edmond City making it easy for you to ensure a smooth operation of same.

Top Benefits of Installing Overhead Garage Doors

There are many advantages of installing an overhead garage door in OKC. Some of them are as follows -

Ensures saving space

Provides complete security

These are automatic and can be operated at ease

Available in a number of designs

Require less maintenance

The benefits of overhead garage doors are many; however, the fact that these are affordable also makes these garage doors a popular choice among homeowners. Additional to these, you should also keep in mind that you should always make sure to hire the services of a professional for installing the door. This ensures an easy access to garage door parts in Edmond City.

There are different types of overhead garage doors, but before purchasing or installing for your house or office you should research about the features of http://www.ehow.com/how_2313157_repair-garage-doors.html each type before making a choice. This would ensure that you buy something that caters to your best interests without fail.

Enterprises offering specialized service with an Overhead Garage Door in OKC city are pioneering in providing the best products and guaranteed services to its clients. Whether you are looking for sales, installation, repair or replacement of an existing overhead garage door, you can be assured of it all.

Today, finding and purchasing garage door parts is very easy. Many companies around your city are popular in offering garage door parts alongside installing and servicing the same. The only thing you have to do is to select the right one. However, it is very important for you to understand the proper way to replace the parts otherwise it might lead to malfunctioning of the garage door. Therefore, it is very important to hire the service garador of a professional specializing in garage door parts in Edmond City.

About the Author:

jimmy fernandez in this blog writes about why it is important to hire professional service for installing overhead garage door in OKC. He also highlights the key benefits of choosing an overhead garage door.

http://www.articlesnatch.com/Article/A-Guide-To-The-Benefits-Of-Installing-Overhead-Garage-Door-In-Okc/6541906

Paranoid torrent sites ban Windows 10 over privacy concerns


Paranoid torrent sites ban Windows 10 over privacy concerns

tin_foil_hat_paranoid

Since the launch of Windows 10, there have been all manner of privacy concerns -- some grounded in fact, others less so. Whatever your view of the latest version of Windows, it's impossible to deny that this has proved one of the more controversial releases to come from the Microsoft stable.

Getting in on the paranoia now are torrent sites, with some coming out and saying they have implemented a ban on the use of Windows 10 to connect to their trackers. Seemingly in response to the news that Windows 10 could disabled counterfeit games, torrent sites including iTS https://myspace.com/unabledonor6488/post/activity_profile_83249505_952d2c4077884ff2a2c3debeaf80ebd6/ have already put measures in place to block Windows 10 users from accessing them, while the likes of FSC and BB are considering taking similar action. Over-reaction?

As reported by TorrentFreak, iTS is worried about what it describes as "the terrible privacy policy of Windows 10". Concerned that information could be collected and shared with anti-piracy company MarkMonitor -- including the rather outlandish suggestion that "Windows 10 sends the contents of your local disks directly to one of their servers" -- users of the site are told that "Windows 10 is officially banned from iTS. Members using http://emergencygaragedoorrepair.com/ it get redirected to a video that http://www.searshomeservices.com/garage-door-openers/repair eggsplains the dangers quite in detail hoping to enlighten as many people as possible".

While these are clearly the paranoid delusions of the tin-foil hat brigade -- the disdainful comments on Reddit make for amusing reading -- the concern is spreading like a virus. Torrent sites FSC and BB have also said they may also block the use of Windows 10; others may well do the same.

Clearly, even for sites (torrent related and otherwise) that implement Windows 10 bans, there are going to be ways to get around any blocks that may be put in place. But the real point here is that the misunderstanding and paranoia about Windows 10 is now starting to reach levels of insanity. Microsoft can be partly blamed for its failure to communicate effectively, but it's also fair to say that most? of the privacy-related concerns about Windows 10 have been blown out of all proportion.

Photo credit: Kunertus / Shutterstock

http://betanews.com/2015/08/23/paranoid-torrent-sites-ban-windows-10-over-privacy-concerns/

A Beginner's Guide to the Pick and Pull Junkyard


If you are new to the world of fixing and maintaining cars, or were not born with a family of DIYers, then you may be unfamiliar with pick and pull type salvage yards. Should you want to start wrenching on your own vehicles, then wrecking yards are definitely a great resource that you want to start utilizing whenever possible.

However, they can be an intimidating place for a newcomer, especially if you have no idea what to expect. We're going to clear the air on most newbie questions, as well as go through some tips that will make your first trip to the junkyard awesome. And depending on how strange a person you are, you might turn out to be like me and think of it as a neat place to explore.

Why Would I Want to Go to a Junkyard?

You may be wondering what the point of all this is. After all, who wants to go get some dirty old used part when you could go to the dealership or local auto parts store instead?

I'm going to let you in on a little secret... salvage yards are cheap. REALLY cheap. Like "you're practically giving this away cheap." New parts, particularly genuine ones from the dealer, are very expensive. Auto parts store are generally in the middle in terms of price, but are a lesser quality than the dealer, OEM level part.

A salvage yard allows you to get high-quality OEM parts for next to nothing. It'sawesome. And while the parts are obviously going to be used, depending on what it is you are buying, you can usually tell the condition of what you are pulling off. And if the part you grab isn't to the quality you were expecting, you can just go back and grab another; it's not like they're charging you high prices!

What's a Pick and Pull Yard Like?

In my eyes, there are really two kinds of wrecking yards:

Pick and pulls Lousy yards with expensive prices that http://emergencygaragedoorrepair.com/ should be avoided.

I'll admit there's some bias. But in all reality, pick and pulls are superior in almost every way. You get to see the condition of the partbeforeit's time to buy, you get to inspect the salvage car to see if there's anything else on it you might like to grab, and the prices are much lower. There is a convenience factor for yards that will go and remove the part for you, but for me, it's not worth the inflated cost. We're only going to be discussing pick and pull yards here.

Most PnP type junkyards will have cars lined up in rows, usually with some organizational system. A common organizational method is to keep domestic brands (Ford, GM, Mopar) in one section, and foreign brands (Honda, Volkswagen, Toyota, etc.) in another. Depending on the place, they will sometimes sort them down even further, like Asian and European cars.

Most of the time, the salvage cars will be lifted into the air and set on top of old steel wheels. These wheels are decent for keeping the car off the ground, but don't go trusting them http://home.howstuffworks.com/home-improvement/repair/how-to-repair-a-garage-door1.htm to the point where you are lying under the cars. Accidents can happen. Be smart and don't become a statistic.

What Should I Bring?

Since it's a "you-pull-it" type of junkyard, you should bring whatever tools you need to remove whatever part you need. If you aren't entirely certain on what you need, it's best to throw all of your basic mechanic's tools (set of sockets, wrenches, vice grips, etc.) into a toolbox.

A tool bag is also another option. It's certainly easier and lighter to carry around than a toolbox. However, many wrecking yards have policies that garage doors online do not allow bags because of theft. Check beforehand, and if you can't find any information, just bring a toolbox anyway to be safe. You can always ask in person and bring a bag the next time.

Whatever it is you decide to bring, add the following 3 items to that packing list:

Work gloves. There is broken glass and metal bits everywhere. It's very easy to get cut. A knife. While not garage door window inserts ideal, sometimes parts are tricky to remove and things in your way need to be cut. Be careful about doing this, as it could be against the rules depending on which yard you are at. PB Blaster. Remember, these are old cars to begin with, and they've been sitting in the yard for who knows how long. Bolts are often rusty or stuck, this helps loosen them up. It's way more effective than WD-40 and costs the same.

Also, wear old jeans and sneakers (boots would actually be ideal.) Shorts and any type of open-toe shoe are a big no-no. It's just stupid to even consider being as you are going to a place with shards of metal and glass, and some places won't even let you in if you are dressed like a lawsuit waiting to happen.

Oh, and be sure to have ID and cash on you. You must be 18 years old to enter, in most cases anyway. And while some yards take credit cards, most operate on a cash-only basis.

Hopefully this inspires the DIY type of people to go explore their local salvage yards. I'm a bit of a freak, but I always enjoy these types of trips. You get to see all sorts of older vehicles. In my many trips, I have seen everything from junky Yugos and Daewoos, all the way up to high-end Audi S4s and Porsche 911s. Seriously, you neverknow what is going to show up there.

If you are on a tight budget and are in need of car repairs, the salvage yards are often a great place to go for parts. It's a very low-stress situation due to the nature of how inexpensive everything is, and the experience gained from the removal of the old part from the junk car will often give you the confidence to tackle the repair on your own personal vehicle.

http://www.infobarrel.com/A_Beginners_Guide_to_the_Pick_and_Pull_Junkyard

An Attractive Look to Garage with Beautiful Garage Doors by Agnes Celina


As the door of a garage is the major portion of it and vey much exposed to the sight of the owners as well as others. Thus in this article we would discuss the decoration of a garage through the decoration of its door. In addition to decoration of the door the maintenance of other parts of the garage is also a minor part of the article.

Generally the people dont consider the garage as important as other apartments of the homes. With regard to the paint and cleaning of the garage, it is not considered as necessary as the paint and cleaning of other parts of the home. It is not a suitable consideration to the garage because like other accommodations, the garage is also a useful accommodation for the car and other transport. Besides in addition to parking of the vehicles, we use the garage for storage of other articles of the home. Thus it is our duty to maintain it like other apartments. The reason of such consideration to the garage is that it is not adjacent to the other apartments of the homes. What is our loss if we pay the consideration to the garage like other apartments? We should keep the garage neat and clean and painted like other parts of the home. It would be an additional pleasure for us.

The main way to decorate the garage is its door which is the size wise major portion and exposed one. For this purpose it is very easy to become successful. In this connection you need to know about the most beautiful garage door available in the http://url.org/bookmarks/jealousradio5180 market. No much botheration is required; firstly you should consult the internet and check all the websites relating to the garage doors. If the pages of the sites of the companies have the pictures of the available doors, you can view carefully. If pictures are not available, by calling the agent of the company serving in your area you can see the pictures of the latest models of garage doors. Besides you can visit the shops and companies physically to see the variety of the garage doors. Further you can see the installed doors in the garages of your friends, neighbors and relatives. If you do so, it is more than sufficient. The garage door selected by you would be the most beautiful http://www.ehow.com/how_2313157_repair-garage-doors.html door of the recent time.

Your next step is installation of the door. It would be appropriate if you hire the craftsman from the same company or shop from where you buy the door. The company or shop having beautiful door should have the skilled persons to install the garage door and electric opener. And they necessarily have such craftsmen to earn good reputation for growth of business during the tough competition time. For your satisfaction you can inquire about the skills and experience of the deputed person. Thereby you can get the professional and beautiful installation of your beautiful garage door and electric opener.

http://www.articlecity.com/articles/home_improvement/article_7115.shtml

What brand of garage door opener to purchase - Kansas City home technology


When it comes to garage door openers, there is one single question that weighs on a customer's mind: what brand of opener to buy?

Fortunately, there aren't a lot of options for the homeowner. Craftsman, Chamberlain, and Genie are the name brands that you can purchase at any retail store. This narrows your options considerably.

If you call in a professional, then your options just broadened. The large majority of professionals carry Liftmaster, while other larger companies manufacture their own product, such as Overhead Door Company. These https://www.diigo.com/user/absurdremo731 two options are only available through a qualified retail service provider of those products, so make sure to http://www.yelp.com/biz/garage-door-repair-denver-2 check your local listings.

Chamberlain, Craftsman and Liftmaster have many of the same parts and are therefore interchangeable and carried by most professionals. Mainly, the gear and circuit board, which are common fixes on all brands.

Genie and Overhead Door Brand are interchangeable as well with each other.

Next you need to decide on what horsepower you need. The large majority of residential garage doors require 1/2HP, no more and no less. However, 3/4HP and 1/3HP are available with all the brands mentioned here.

Probably the single most important difference between all of the above brands is in the rail. Craftsman, Chamberlain and Genie have a split rail. This requires assembly of 3-5 pieces to create the rail that the opener travels on as your door goes up and down. This creates a lot of flexibility and fluctuation in your doors operation, and sometimes the joints can become a problem down the road and do more damage to the door and opener itself. The plus side here is that the large majority of garage door professionals are equipped to service these brands.

Liftmaster and Overhead Door Company are equipped with a solid, one piece rail. With these rails there is very little flex and bend during the door operation, and no chance of joint problems down the road. While http://www.garagedoorrepairexperts.com/ Liftmaster is what the professionals install and recommend and equipped to service for problems down the road, by choosing Overhead Door Company you are choosing to have them service your opener and door for years to come. Due to the special parts needed and availability of them only through Overhead Door Company, most other garage door companies will not perform service on them.

Liftmaster is the choice to go with for its quality, durability, available servicing, and easy access to replacement parts.

http://www.examiner.com/article/what-brand-of-garage-door-opener-to-purchase

DIY: Build Garage and Shed Doors for extra Security


Do you have what it takes to build your own Garage Doors

Have you ever thought of building your own Garage or Shed Doors for extra security. If you add Garage doors onto your car port it will not only give you more privacy but added security.

If for instance you have a modified car and your insurance policy requires your vehicle to be behind locked doors then this idea could fit those requirements.

Insurance policies are a worry in this garage door torsion spring aspect:

You have to have your car behind locked doors while at your home Yet you are covered when parked anywhere else. This could be when you are travelling or parked by the side of the road or visiting someone and parked on their front lawn.

Where is the logic in that?

Therefore we decided to build our own solid steel door on the front of our huge car port. This is what we did and if this idea interest you then you could do something similar.

For Steel doors you will need:

Enough Steel depending on whether you wish to build one or two doors. Colorbond sheet metal of your choice or you can use cheap corrigated iron or custom orb profile Welder and Welding Rods Power supply and power leads Good metric Tape Measure Metal Square Large level this is a must unless you want lopsided doors Metal Tek Screws Full swing Hinges Pad bolts and padlocks Strong Clamps Wood or bricks to support weight of gate until you have it on hinges Concrete to put in hole to lock the door bolt into the ground Rust proof paint if using second hand steel work this is a must although I would use it anyway A good Trade assistant- that was me, running back and forth and lugging the steel.

Note: A good T/A needs to anticipate what the tradesman will require next without having to be asked. Believe me it will make a smoother build if you can do this.

Let's get started on the http://bit.ly/1DhsDdt Garage door project

Before you do anything, you will need to make sure that the carport steel poles are strong enough to take this extra weight. If not then reinforce them by either adding extra struts across the top or sides.

Measure the distance between the two uprights. Take off the thickness of hinges, and a 5ml space between the two doors. Halve that measurement, and that will be how wide each door will be.

Cutting your Steel

You need to cut 4 pieces of steel that long. Work out the required height and cut four of those. Keep in mind that these need to be inserted inside the top and bottom pieces.

Before you weld these make sure they are exactly square. Clamp them together so they cannot move.

Tack them and again check they are still square then weld these eight welds, four on each corner of the doors. Grind these to a smooth finish.

If these are large doors then you should reinforce them with another steel going from (right door) the bottom right to the left top. Left door is the opposite from bottom left to top right. Cut these to fit snug into the corners and weld in place.

Now comes the hard part -Hanging the doors

Ours are built out of very heavy steel so we had to be very careful that it didnt move or fall. You will still have to make sure that you have everything safe.

You will need to work on one at a time. Place bricks or wood on the ground to required height to support the weight of the new door. If you do not have any helpers then you will have to use a couple of pieces of wood and clamp them so it can not fall at one end. If you have a strong carport you could tie a rope from the top to help hold the door upright.

Now sit the hinges in place and make sure you have it correct. Put a couple of pieces of wood over the support and the gate and clamp in place so it cannot move.

Do the same with the other gate. It is no good welding everything in place if the doors do not quite fit. Make sure you have something under the centre where the two door meet to make sure they are level.

If you are satisfied that everything is correct use secure tack weld the hinges in place. Now it is time for the swing test. Remove all the clamps holding it in place and open your new door frames. Will they open as far as you need. If not you will have to fix it before you completely weld the hinges.

Are the gates hanging level. This is not easy. We had ours level but we still had to remove one and reposition it.

Whew! That took a lot of energy and it was in 40 degree temperature so we only worked in the mornings in the shade. We are not as young any more so we took a few days to get this far.

Now you can rustproof and paint the frame.

Fix Sheeting on Garage Doors

Again put something under the garage doors to rest the sheeting at the correct height. It is very important to make sure that each sheet goes on straight. If one is out by one ml then by the time you get to the other end it will be worse still. Clamp the metal sheet at the top to the gate so it does not move.

Do this with each sheet. Once you know it it right then start tek-screwing them in place. Where you put the screws will depend on the profile of sheet metal that you use. We put one every second.

TIP: If you have added a cross member across the gate then you need to mark where it is as you put each sheet in place so you don't put hole in the wrong places.

Fit the closer on garage doors

Dig a small hole in the ground where the two doors meet. Mix some concrete and poor into hole, before it is completely set make a hole in the centre to suit the closer bolt. Leave to dry out.

TIP: Do not put bolt into this for a day or two, so it is solid.

Fix your http://www.searsgaragedoors.com/GarageDoorRepair.aspx pad bolt to garage doors

Now all you need to do is fix the pad bolt onto garage doors. And of course padlock it up so you are covered with your insurance policy.

Timber Garage doors

If you make them with timber frames then follow the same principles. The difference is you will need different materials and fixings. You have to cut timbers so they fit together using a butt or cross halving joint and nail together.

Note: If you are installing large garage doors then remember it will be safer to have a concrete section on both doors to bolt the open doors in place in case of strong winds. Large doors could kill someone if caught with the wind so make sure you secure it correctly.

In conclusion

If a couple of 70 year olds can make big heavy Garage doors like these then I am sure you younger folks can do it too.

To reduce the cost you can also buy second hand steel and corrugated iron. This will save you a few dollars. Although you will have to finish them off with a coat of paint.

If you are not that handy type of person you can still have a garage door installed to give you more security. There are all types of garage doors to choose from; Roller doors, tilt-a-doors, hinged doors and they all come in a variety of colours and designs.

Shelving Solutions for your shed or Garage

Why do men need a Shed

Garage floor finishes

Rust removal and Prevention

How to fix a dropped or unlevel floor

Leaks in Shower Walls

Installing Garage door Opener

http://www.infobarrel.com/DIY_Build_Garage_and_Shed_Doors_for_extra_Security

U.S. News | National News




Nick Tomecek/Northwest Florida Daily News/AP Photo

"newsbulletin.nbFooter = ""//append widget header$("#newsbulletin > .midcontainer").append("");$("#newsbulletin > .midcontainer").append(newsbulletin.nbContainer);$("#newsbulletin > .midcontainer").append(newsbulletin.nbFooter);newsbulletin.nbDiv = document.getElementById('nbItemContainer');nbjsId = 0;newsbulletin.load = function()//alert(newsbulletin.baseloc+'/xmldata/newsbulletin?id=14640490&twOverride=&lpos='+newsbulletin.lpos+'&section=&'+nbjsId)//to try and
electric garage doors handle caching in webkit browsersdynamicJS.load('newsBulletin'+nbjsId, newsbulletin.baseloc+'/xmldata/newsbulletin?id=14640490&twOverride=&lpos='+newsbulletin.lpos2+'&section=&'+nbjsId);//dynamicJS.load('newsBulletin','http://preview.abcnews.go.com/xmldata/newsbulletin?id=13564505');//display itemsnewsbulletin.displayItems = function(nbItemObj)//check if status updatethis.isStatusUpdate = (nbItemObj.label == 'Status Update')?true:false;//item type classthis.itemTypeClass = (this.isStatusUpdate)?'orange':'blue';//bg positionthis.itemBgPos = '100% 55%';if(nbItemObj.bgPos != null)this.itemBgPos = nbItemObj.bgPos;//author imagethis.nbItemStyle = '';this.nbH4Class = 'class=nbheader';this.nbH4Style = '';this.nbItemStyleAuthor = '';if(nbItemObj.authorimage != null && nbItemObj.authorimage != '')this.nbH4Style = ' style=width:210px;';this.nbItemStyle = 'background:url('+nbItemObj.authorimage+') no-repeat bottom right'//+ this.itemBgPos;this.nbItemStyleAuthor = ' nbItemContentsAuthor'//titlethis.title = '

'+nbItemObj.title+'

';if(nbItemObj.link != null && nbItemObj.link != '')this.title = ''//textthis.text = '';this.textCapped = '';this.morelink = 'More'if(nbItemObj.text != null)this.text = nbItemObj.text;//if item is not expanded display capped text if applicableif(nbItemObj.isExpanded != true)if(nbItemObj.text.length > 63)this.textCapped = nbItemObj.text.substring(0, 63);this.text = this.textCapped + '...';if(this.isStatusUpdate)this.text = this.textCapped + '... ' + this.morelink;//socialthis.social = '';this.socialStyle = '';this.authorBlock = '';this.divider = '';this.fb = '';if(nbItemObj.authorfb != null && nbItemObj.authorfb != '')this.fb = ''this.twitter = '';if(nbItemObj.authortwitter != null && nbItemObj.authortwitter != '')this.twitter = ''this.bio = '';if(nbItemObj.authorbio != null && nbItemObj.authorbio != '')this.bio = ''+nbItemObj.author+''this.authorBlock = '

'+this.bio+'

'if(nbItemObj.author != null && nbItemObj.author != '') this.twitter != '')this.socialCustomStyle = '';this.social = this.fb + this.twitter;this.socialStyle = ' style="height:21px; padding: 2px 0px;' + this.socialCustomStyle + '"';elsethis.social = '';this.textStyle = '';if(nbItemObj.authorimage != null && nbItemObj.authorimage != '')this.textStyle = ' style=width:208px;'; else this.categoryTag = '';this.nbTextOverride = '';this.rowTemp = ''+this.title+'

'+nbItemObj.date+'

'+this.authorBlock+'

'+this.text+'

'+this.social+'

';if (nbItemObj.notes) nbNotes = nbItemObj.notes;nbNoteStr = '';nbNoteDivider = '';$.each(nbNotes, function(idx) nbNote = nbNotes[idx];this.noteAuthorBlock = '';this.notefb = '';if(nbNote.noteAuthor.facebook != null && nbNote.noteAuthor.facebook != '')this.notefb = ''this.notetwitter = '';if(nbNote.noteAuthor.twitter != null && nbNote.noteAuthor.twitter != '')this.notetwitter = ''this.notebio = '';if(nbNote.noteAuthor.bio != null && nbNote.noteAuthor.bio != '')this.notebio = ''+nbNote.noteAuthor.name+''this.noteAuthorBlock = '

'+this.notebio+'

'this.notesocial = '';this.noteSocialStyle = '';if(nbNote.noteAuthor.name != null && nbNote.noteAuthor.name != '')if(this.notefb != '' elsethis.notesocial = '';if (idx == nbNotes.length-1) nbNoteDivider = '';this.nbNoteDiv = '

'+nbNote.noteHeadline+'

'+this.noteAuthorBlock+'

'+nbNote.noteOverview+'

'+this.notesocial+'

';nbNoteStr += this.nbNoteDiv;);this.rowTemp += nbNoteStr;return this.rowTemp;function showMoreText(id)//grab old item heightvar oldItemHeight = $('#nbItem_'+id).height();//retrieve the content from the array$('#text_'+id).html(contentObject[id])//store id a list of opened objectsfullTextList.push(id.toString());var newContainerHeight = $("#nbItemContainer").height() + ($('#nbItem_'+id).height()-oldItemHeight);$("#nbItemContainer").css('height', newContainerHeight);//reinitialize scrollwindow.api.reinitialise();lastNBObjStr = '';function isNewData(data)isNewTemp = false;currNBObjStr = '';$.each(data.updates, function(ind)currNBObjStr = currNBObjStr + data.updates[ind].objId + data.updates[ind].date;);//console.log('x'+currNBObjStr);//console.log('y'+lastNBObjStr);if(currNBObjStr != lastNBObjStr)isNewTemp = true;else//console.log('no refresh');lastNBObjStr = currNBObjStr;return isNewTemp;isHeaderLinkLoaded = false; // flag to check if the header link is loadedisShareLinkLoaded = false; // flag to check if the share link is loadedisDoneLoading = false; // flag to check if the html is done loading in the jScrollPanefunction newsBulletin(data)if(data)isNewDataFlag = isNewData(data);if(isNewDataFlag)//clear contents firstnewsbulletin.nbDiv.innerHTML = '';//console.log('refresh');updates = data.updates;headerLink = data.widgetLink;shareLink = data.shareLink;if (headerLink != '' && headerLink != null && !isHeaderLinkLoaded)var twitterImg = ""$("#newsbulletin > .midcontainer > .widget_head").append("");$("#newsbulletin > .midcontainer > .widget_head > .twitterLink a > .twitterContent").append("" + twitterImg + "");isHeaderLinkLoaded = true;//clear the author cutouts arraynewsbulletin.authorCutouts = [];// check to see if there is a height set for container, if so clear it// prevents cacheingvar hasHeight = $('#nbItemContainer').attr('style');if (typeof hasHeight != 'undefined')$('#nbItemContainer').removeAttr('style');$.each(updates, function(ind)var itemDetails = new Object();it = updates[ind];//populate the itemDetails objectitemDetails.id = it.objId;itemDetails.title = it.title;itemDetails.objType = it.objType;itemDetails.link = it.link;itemDetails.date = it.date;itemDetails.label = it.label;itemDetails.author = it.author.name;itemDetails.authorbio = it.author.bio;itemDetails.authorfb = it.author.facebook;itemDetails.authortwitter = it.author.twitter;itemDetails.feed = it.feed;itemDetails.category = it.category;//set defaults if item is a status updateif(itemDetails.label == 'Status Update')if(it.author.image == '')it.author.image = 'http://a.abcnews.com/assets/images/abc_news_logo_84x84.png'if(it.author.name == '')itemDetails.author = 'ABC News'itemDetails.authorfb = 'http://www.facebook.com/abcnews'itemDetails.authortwitter = 'http://twitter.com/abc'//only pass the author image if it's not displayed in any of the items yetif($.inArray(it.author.image, newsbulletin.authorCutouts) == -1)itemDetails.authorimage = it.author.image;//add to ignore listif(it.author.image != '' &&($.inArray(it.author.image, newsbulletin.authorCutouts) == -1))newsbulletin.authorCutouts.push(it.author.image);if(it.text != '')itemDetails.text = it.text;elseitemDetails.bgPos = 'bottom right';if (it.notes) itemDetails.notes = it.notes;//build a name value pair list of id/textcontentObject[itemDetails.id] = itemDetails.textitemDetails.isExpanded = ($.inArray(itemDetails.id, fullTextList) > -1) ? true : false;//build markup$("#nbItemContainer").append(newsbulletin.displayItems(itemDetails)););$("#nbItemContainer").append('');//set the height of container div$("#nbItemContainer").css('height',$("#nbItemContainer").height());if (shareLink != '' && shareLink != null && !isShareLinkLoaded)$("#newsbulletin > .midcontainer > .nbFooter").css("height":"35px", "border-top":"1px solid #d5d5d5", "border-bottom":"border-bottom:1px solid #eaeaea");$("#newsbulletin > .midcontainer > .nbFooter").append("");isShareLinkLoaded = true;if($.browser.msie)if ($.browser.version .midcontainer > .nbFooter").css("display":"none");var timeoutId = setTimeout(function() $("#newsbulletin > .midcontainer > .nbFooter").css("display":"block");clearTimeout(timeoutId);, 3000);dynamicJS.unload('newsBulletin'+nbjsId, newsbulletin.baseloc+'/xmldata/newsbulletin?id=14640490&'+nbjsId);isDoneLoading = true;if ($.browser.webkit) if(nbjsId .midcontainer > .nbFooter").css("display":"none");var timeoutId = setTimeout(function() $("#newsbulletin > .midcontainer > .nbFooter").css("display":"block");clearTimeout(timeoutId);, 3000);7500)setInterval(function()window.api.getContentPane().html(newsbulletin.load());,120000);setInterval(function() // we could call "pane.jScrollPane(settings)" again but http://www.searshomeservices.com/garage-door-openers/repair it is// more convenient to call via the API as then the original// settings we passed in are automatically remembered.// Initialization of the container should be done after all the markup has been loaded// since there is no listener cardale garage doors that could be passed into reinitialise() for callbackif (isDoneLoading)window.api.reinitialise();isDoneLoading = false;, 5000);;addOnload(newsbulletin.load());

http://abcnews.go.com/US/story?id=31499819

Breaking Into Cars: Thieves Crack Wireless Security Codes


Just after 1 o'clock one August night, a man calmly walked up to a locked car parked on a downtown Chicago street and within seconds -- without a key, without any force -- was sitting http://www.broten.com/service-repairs.html in the passenger's seat. If you witnessed it, you wouldn't think anything of it. It was just a man getting into his car.

Except it wasn't his car. It was someone else's, but the man had easily broken in and could now steal whatever he wanted. Thieves, it seems, have figured out a way to unlock cars equipped with security systems, all without so much as breaking a window or even jimmying a lock. While they are not actually stealing automobiles yet, they are able to steal belongings found inside locked cars.

That car in Chicago belongs to Michael Shin, who thought he was losing his mind when his sedan was robbed. Shin, after all, had locked the car, but now his belongings had been stolen with no sign of forced entry.

"I kept thinking, 'How did they gain access to my car if nothing was broken?'" he told ABC's Chicago station https://myspace.com/gleamingdormito73/post/activity_profile_92249825_db3d98e2c7ec4ac5bbf7f0ecd2118346/ WLS-TV.

Fortunately for Shin, the answer was right there on his home security video, so he got to see how the robber had done it.

"He walks liftmaster past my car, the dome light comes on and he kind of stops in his tracks and walks right into the car," Shin told WLS. "It's mind-boggling how smart they are to build some sort of a device or an app or something that allows them to steal easily."

It wasn't only Shin's car that was robbed -- his neighbors' were, too. Wireless signal experts think some car thieves have cracked security codes, so they are able to send the same unlock signal that an owner's key transmitter uses.

"It's quite possible that they already decrypted the code, they actually have the key of the car, so they can open it any time they want," Yang Xu, a professor at the Illinois Institute of Technology, told WLS.

That is what Chicago police believe too.

"We believe that this code-grabbing technology was utilized and we are looking into it and investigating," the Chicago Police Department's Andrew Schoeff told WLS.

The technology that keyless entry systems use has become much more complicated since 2010 and now changes the codes on a regular basis, but for systems that were built before then, it's a different story. And that has left locksmiths like Bill Plasky feeling dumbfounded at how thieves are now exploiting outdated systems to open cars like Shin's.

"Honestly," said Plasky, "I've never seen anything like that."

-- This embed didnt make it to copy for story id = 17367442.

http://abcnews.go.com/Technology/breaking-cars-thieves-crack-wireless-security-codes/story?id=17367442

The Chamberlain Group, Inc. Appoints Jim Mole as General Manager of Australia and New Zealand.


ELMHURST, Ill. -- Jim Mole has http://www.last.fm/user/abstracted790 been appointed general manager of Australia and New Zealand for The Chamberlain Group, Inc., the world's largest manufacturer of residential garage door openers, commercial door operators, and a leading manufacturer of gate operators and https://delicious.com/alluringkingdom93 access controls. E[acute accent]Mole will be based in Sydney and will be supervising all of Chamberlain's activities throughout Australia and New Zealand, including the continued growth of the newly acquired Merlin and Grifco brands. E[acute accent]Mole has http://www.charlotteoverheaddoors.com/ held key posts for Dow Chemical, Eagle Environmental Systems, and Makhteshim Agan in Australia, New Zealand, and Southeast Asia. E[acute accent]"Jim's depth of experience and stellar skills makes him the perfect person for this position," said David Rolls, chief executive officer, The Chamberlain Group, Inc. "We are certain that he will provide the outstanding leadership and organizational skills to help Chamberlain's brands grow in the international marketplace." E[acute accent]The Chamberlain Group, Inc. manufactures and markets residential garage door openers, commercial door operators, residential and commercial gate operators, telephone entry systems and related access control products.

COPYRIGHT 2006 Business Wire



No portion of this article can be reproduced without the express written permission from the copyright holder.

Copyright 2006, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

http://www.thefreelibrary.com/The+Chamberlain+Group,+Inc.+Appoints+Jim+Mole+as+General+Manager+of...-a0148361191

Review: Marina and The Diamonds


Three years after the release of her second studio LP 'Electra Heart', Marina Diamandis, better known as Welsh singer/songwriter Marina and the Diamonds, returns to the fold with album no.3, 'FROOT'.

Compared to its 2012 predecessor - which featured contributions from the likes of StarGate, Dr. Luke and Diplo - 'FROOT' is a more consistent effort, with the 29-year-old taking all of the album's writing credits.

Production is handled alongside David Kosten, aka London-based electronic DJ/artist Faultline, whose prior work includes tunes for UK http://marinahotel.com/ indie-pop pixie, Bat For Lashes.



Boasting a premier run of tantalising hooks, the tracklisting is an irresistible array of pop/electronic flavours.

The best tracks on 'FROOT' always sound one step ahead of the charts, doing the job of a pop song but without all the frilly dressing - sounding instead like they don't really care if you like them or not.



Although 'Blue' is driven by shamelessly exuberant, brisk, bouncy beatwork, the standout track has Marina desperately attempting to dance her way through loneliness and craving the touch of a man.

'FROOT' highlight 'Better Than That' incorporates vibrant retro elements without losing a satisfying progressive edge.

Defending her own personal and creative contradictions, Marina wholeheartedly rejects http://www.everytrail.com/view_trip.php?trip_id=3075804 the baggage that comes with being a major-league female performer on the entertainingly off-kilter, 'Can't Pin Me Down'.

'Gold' ever-so-slightly interrupts the record's winning streak and 'Forget' can sound like a simplified version of the smarter, more challenging material on 'FROOT'.

Still, the latter administers a dose of deep lyrical content and provides a more intimate glimpse at the lady behind the microphone.

Regretting her careless treatment of a loved one, 'I'm A Ruin' is a slice of confessional pop semi-balladry that does the same.

Entrenched in self-imposed isolation, aided by a gradual, strident beat, Marina's avant-gardism is unrelentingly hi-res within the five-star opulence of 'Solitaire'.

Marina's artistic oddities http://www.hotels.com/de1413819/hotels-marina-california/ are sprinkled throughout 'FROOT', however her particular kind of flamboyance http://www.wattpad.com/95050429-finding-the-best-mooring-service-marina-wareham isn't suffocating.

The floaty, mesmeric 'Weeds' is given the room it needs to breathe, and the album's buzzy, Tetris-style title track is coolly held together by an onslaught of pouty ad-libs, sex-doll phrasing and ghost-light harmonies.

Marina's thoughts on love, life and death on the slow-burning 'Immortal' are in no way profound. However, her vocal theatrics - which range from innocent, angelic tones to an edgier warble - give the track intensity.

As one of the many songs on 'FROOT' that's completely transformed by the strength of its refrain, the songstress struggles to comprehend the complexities of human nature on 'Savages'.

The tunes towards the backend of 'FROOT' can feel a little similar structurally, still, Marina uses them to muse on a cluster of subjects that mainstream pop, for the most part, chooses to stay clear of.

http://samsonpharaoh.hubpages.com/hub/Review-Marina-and-The-Diamonds-FROOT

EU asks U.N. to OK military action on migrant boats


Story highlightsLibya army chief has previously expressed opposition to planEuropean Commission to consider mandatory numbers of migrants EU countries must acceptUK expresses opposition to any mandatory quotas on number of people to be resettledFederica Mogherini, the EU's foreign policy chief, outlined for the U.N. Security Council the EU's plan to destroy boats used by smugglers as long as the boats are known to be empty.

The boats are used to transport people who are bent on escaping violence, or desperate for a better life, from North Africa primarily to Italy -- which happens to be Mogherini's home country.

Many of the migrants are from sub-Saharan Africa and Syria, or are foreign workers who have lost their livelihoods. They know that traffickers can take them to Europe from Libyan shores.

But many die at sea. More than 3,400 migrants died in 2014, according to estimates from the U.N refugee agency. And nearly 2,000 have lost their lives already this year, the agency estimates.



Libyan army chief opposes military actionMogherini said the EU could not stem mass migrations on its own.

"This has to be a common global effort," she said.

Any migrants found on the boats will be processed as refugees or asylum seekers, she said, rather than being forced to return to their home countries.

But the proposal will not meet with unanimous approval in the region. In an interview with CNN's Becky Anderson at the end of April, Libyan army head Gen. Khalifa Haftar said his country had not been consulted, would not cooperate -- and, he hinted, might even resist military action on its territory.

EU might require specific numbers http://www.sailor.lib.md.us/services/marina/default.aspx?id=56300 to be acceptedThe EU is also pushing a plan to accommodate those migrants who do make it to Europe -- one that will not meet with universal approval on the continent. The plan, a draft of which CNN has seen, would mercury outboard parts call for quotas on the number of migrants each EU country would be required to take in.

A spokeswoman for the European Commission said repeatedly Monday that the document was still being redrafted, and she would not comment on whether any EU countries would be able to opt out of the quotas.

The commission, which is the EU's executive arm, will consider the proposal Wednesday.



UK opposes mandatory quotasBritain has already made it clear that it http://freshbeatband.wikia.com/wiki/Marina opposes quotas.

"The UK has a proud history of offering asylum to those who need it most, but we do not believe that a mandatory system of resettlement is the answer," a representative for the British Home Office said. "We will oppose any EU Commission proposals to introduce a nonvoluntary quota."

Skepticism of the EU runs high in Britain, as does concern over the number of migrants entering the country. David Cameron, the newly re-elected Prime Minister, has promised to hold a nationwide referendum by the end of 2017 on whether the UK should leave the EU.

Journalist Barbie Latza Nadeau contributed to this report.

http://www.cnn.com/2015/05/11/europe/eu-migrants-military-action/

Boat Propeller Comparison


The correct propeller is important for the optimum performance of the boat. The size of the propeller, the style of the propeller and the maximum horsepower that the boat propeller will give in water are points to consider when comparing boat propellers. The propeller must also meet the unique needs and desires of the boater. The propeller will have to match the RPM requirements specified by the manual of the boat engine.

The first consideration when comparing boat props is size (i.e. diameter of the prop). The diameter and pitch should suit the needs of the boat and the configuration of the boat engine. The pitch should give optimum performance for the RPM of the propeller. Some boats may require a large diameter and low pitch while others may require a high pitch but a small diameter. After ascertaining the size requirements, boaters can evaluate among the different props available for the configuration.



The number of blades of the prop is a second point of comparison. Four blade props give better performance fuel economy, better lift for the boat and grip on water. They give better speed for large boats on slow water. Three blade props give better top end speed and they are the http://www.instructables.com/id/ENQCLRJI4SCLN80/ ideal props for racing. If the use of the boat changes and an upgrade is required from a three to a four blade prop, the four blade prop should be purchased at the same cost.

The material out of which the prop is made is an important consideration. Most props are made of either stainless steel or aluminum. Stainless steel gives good performance and is non corrosive. The only drawback is that when stainless steel props collide with an obstacle, the jolt resonates and damages the motor. Aluminum is lightweight and corrodes in salt water. When an aluminum prop hits an obstacle it breaks but prevents damage to the engine. Composite props give good performance and are inexpensive.

The engine of the boat is an important consideration. The prop should be purchased to suit the manufacture of the engine, the horsepower of the engine, the model and the year when the engine was made. The manual of the engine is a good reference for comparing props.

The price is an important factor in purchasing a prop. Good props are available at discount rates. The internet has many websites which offer discounted props. All types of props are available at affordable rates for all types of engines. The propeller should give optimum performance. An expensive prop is not necessarily the best propeller.

If the boater is looking for a spare emergency prop, weight should be considered. Aluminum props weigh much less than stainless steel props. Plastic props have become popular as emergency props. However, aluminum props can be repaired while plastic props cannot be repaired if they break during a collision.



The type of boat is a factor to consider. Fishing boats, cruisers, pontoons and other boats used on slow water may http://bulbapedia.bulbagarden.net/wiki/Marina_(Johto) require a different type of prop while speed boats and boats that ply on the high seas require a different type of prop.

By: Jacob Wright

Article Directory: http://www.articledashboard.com

Additional Resources: Finding Boat Props on Sale | Outboard Boat Props | How to Find Boat Prop http://www.marinaandthediamonds.com/ Pitch

http://www.articledashboard.com/Article/Boat-Propeller-Comparison/1085591

Wakeboarding Boats for Sale - InfoBarrel


Have you ever thought of the boat you use for wakeboarding as a piece of gear? In truth, the boat you use is the most crucial apparatus; it even outweighs your board in significance. That is why it is so essential to take some time to think about any purchase.

There are well-known manufacturers who dedicate themselves to producing boats exclusively for water sports, wakeboarding in particular. It is best that you consider one of the companies listed in this article because they specialize in the details of these types of boats.

So if you are planning on purchasing one, do some research on one of the listed manufacturers. Some of the most well-known wakeboarding boat companies Calabria, Centurion, Epic, Gekko, Malibu, MasterCraft, Moomba, Sanger, Supra, Svfara and Tige. They all provide great boats, but they obviously have their differences; it just depends on what you want.

To provide a safer and more interesting riding experience, boat manufacturers strategically position the engines.



vDrive boats are the most common http://marinawareham.soup.io/post/522953376/Finding-the-Best-Mooring-Service-Marina-Wareham wakeboarding boats. vDrive basically means that the boat is inboard and the engine is positioned at the stern, but situated backwards. Other wakeboarding boats are identified as direct drive boats because the engine is positioned in the center of the boat.

Not only are wakeboarding boats safer for riders, but they also have special features that allow them to create larger wakes for more intense riding. To attain optimal riding conditions, you have the option to include technologies such as Ballast, Wedge, and hull equipment.

Due to the heavier weight, the ballast wakeboard boat generates a larger wake, and is programmed on most boats. The wedge boat, created by Malibu Boats, produces a variety of wake structures for a more interesting ride.

The Malibu Wakesetter VTX is one of http://marinas.com/ the most desired wakeboarding boats. Not only is it beautiful, but it also possesses awesome features for the best ride. It has http://www.ci.marina.ca.us/index.aspx?NID=17 an in-floor stock ballast system, measures 20 feet long, and has a large amount of space.

The beam measures 98 inches and the draft 22 inches. This boat is recommended for the more earnest wakeboarders, not only because of its features, but because of the cost. The retail price of this fully-loaded boat is about $51,000.

Even if you are the most serious rider and don't have enough money for this particular boat, there are wakeboarding boats for people with limited funds.

Clearly, you won't get all the awesome features of the Malibu http://www.wattpad.com/95050429-finding-the-best-mooring-service-marina-wareham Wakesetter VTX, but there will still be some great attributes of the boat you do purchase. Regardless the style and make of your wakeboarding boat, you can still have a great time out there.



http://www.infobarrel.com/Wakeboarding_Boats_for_Sale

Race on the high seas: Cartels feature new, faster smuggling boats


Picuda .jpg

Sept. 18 2014: A maritime patrol aircraft detected this 40-foot go-fast vessel in the Caribbean Sea. DEA and Bahamian Police officials responded to the location and detained two suspects after locating 40 bales of marijuana. (U.S. Coast Guard photo)



Latin America's drug cartels are leaving the U.S. Coast Guard in their wake, with new and faster speedboats law enforcement officials say are virtually undetectable by radar.

The new boats, nicknamed "Picudas," after a tropical fish whose long, thin bodies they resemble, are http://marinawareham.soup.io/post/522953376/Finding-the-Best-Mooring-Service-Marina-Wareham made of fiberglass, making them invisible to radar and efficient with fuel. While older smuggling vessels took as long as three days to make the trip from Costa Rica to Jamaica, the Picuda can make the trip in two.

"They [cartels] are being forced to do something that they would rather not."

- Adam Isacson, Washington Office on Latin America

Dialogo, a newspaper published by the Pentagon's Southern Command, quoted one Coast Guard source that called the craft "a wave-breaking http://jazztimes.com/community/articles/152108-finding-the-best-boat-repair-marina-wareham-boatyard go-fast wonder that defies radar detection." The boats give the bad guys a leg up on authorities trying to cut off the flow of South American drugs, according to the article.

"They [cartels] are being forced to do something that they would rather not," Adam Isacson, Senior Associate for Regional Security Policy at the Washington Office on Latin America said to FoxNews.com. "They would like to be able to make one trip. Instead they are forced to divide their load and take these short trips. It means that they are being inconvenienced and it is more expensive.

"But it's clearly indicative of the cat-and-mouse game they are playing with the law."

The Southern Command hunts down the cartel boats as part of Operation Martillo, a multi- military branch effort which targets trafficking routes in coastal waters along the Central American isthmus.

A recently as November, the Navy's USS Gary and US Coast Guard teams seized 580 kilograms for cocaine from a Picuda in international waters off the coast of Central America.

Many of the cartels also use submersibles, or narco-submarines, on smuggling routes to avoid detection. The small vessels are made by the cartels themselves and specifically designed to also be difficult to detect with radar. They traditionally used them to smuggle narcotics from Columbia to Mexico, where the cargo is then transported via land to the United States. They were first discovered by law-enforcement in 1993 but have not been spotted in recent times.

"There really hasn't been a lot of them found lately which likely because they are harder to detect," said Isacson.

Other experts say that the use of the Picuda is just the latest innovation in long line of methods used since the modern age of drug-smuggling began.

"Organized crime has been incredibly inventive and innovative when it comes to outwitting or outrunning the authorities," Duncan Wood, director of the Wilson Center's Mexico Institute said to FoxNews.com. "They have used speed boats in the past, and they continue to use slower boats today alongside faster options. What is fascinating is to see how the cartels in various parts of the world have used different technologies, including submarines and planes http://www.merriam-webster.com/dictionary/marina to get their product across borders."

Perry Chiaramonte is a reporter for FoxNews.com. Follow him on Twitter at @perrych



href='http://www.foxnews.com/world/2015/01/16/race-on-high-seas-cartels-feature-new-faster-smuggling-boats/'>http://www.foxnews.com/world/2015/01/16/race-on-high-seas-cartels-feature-new-faster-smuggling-boats/

Chinese police 'opened fire, beat protesters and used tear gas' on Tibetan activists in Southwest China ...


Chinese police 'open fire, beat protesters and use tear gas' on Tibetan activists - Asia - World - The Independent

Tenzin Delek Rinpoche was serving a 20-year prison sentence after being found guilty by Chinese courts of separatism and terrorism and convicted for playing a part in a bomb attack in Chengdu in 2002.



More than 1,000 Tibetans took to the streets of Nyagchuka County in Sichuan, a province in the southwest of China, to mark the death yacht of Tenzin Delek, before police opened fire in an attempt "to control the crowd."

Officials in China confirmed this week that Tenzin Delek, who was 65, died whilst being held in a Chinese prison.

According to sources in Tibet, "the Chinese fired into the air, beat protestors and used tear gas." Reports state that six or seven "older people" were taken to hospital yesterday afternoon, and a further 17 people, including nuns, were taken to hospital in the evening.

The Tibetans gathered outside a local government office, demanding the lama's body, so they can carry out funeral rituals. Chinese officials currently say they will return the remains? to the family, after a cremation takes place in the prison.

Tenzin Delek"s cousin, Geshe Nyima, who lives in India, has told Reuters that the cause of his death still remains unclear.

Tibetan people had called for the release of Tenzin Delek Rinpoche before his deathTibetan people had called for the release of http://www.babynamewizard.com/baby-name/girl/marina Tenzin Delek Rinpoche before his death

Governments in the European Union called for Tenzin Delek"s release at the time of his sentencing, as did the US and human rights organisations around the world. His initial sentencing was for a suspended death sentence, which was later reduced to 20, and then 12 years in prison.

His alleged co-conspirator, Lobsang Dondrub, was executed in January 2003 after appeals to both men"s convictions were rejected. Both had maintained their innocence throughout.



Speaking to The Independent, Alistair Currie, Campaigns and Media Manager for Free Tibet, said: "Authorities" refusal to hand over bodies of those who have died in custody or following mercury marine self-immolation protests is a consistent and recurring source of grief and anger for Tibetans, denied the opportunity to conduct proper funeral services."

READ MORE: CHINA BANS TIBETANS FROM HAVING PASSPORTS

"In this case, the prison is also denying the outside world the opportunity to determine Tenzin Delek Rinpoche"s cause of death " an even more sensitive issue than normal because he was denied http://www.parks.ca.gov/?page_id=10915 medical parole despite serious illnesses. It"s little surprise that there has been a significant protest in his area and nor is it a surprise that authorities have responded with force."

The US State Department has released a statement urging Chinese authorities to return the body.

http://www.independent.co.uk/news/world/asia/chinese-police-opened-fire-beat-protesters-and-used-tear-gas-on-tibetan-activists-in-southwest-china-yesterday-10387449.html

Why Marina Abramovic Is Not Your 'F*cking Guru'


In a book-lined room in Sean Kelly Gallery in New York City, Marina Abramovic boats for sale sat on one side of a long, wooden table. I sat down across from the performance artist for the first time, still regretting not doing so four years ago at her Museum of Modern Art retrospective, "The Artist Is Present." As I wiped away the last bit of dewiness from my eyes, Abramovic asked me if I'd been in "Generator" yet.

"Yes. It made me cry and I couldn't stop," I told her.

"Wow," she said. "Because we always forget the simple things."

Abramovic's latest work is not a piece of performance art centered around her physical body, as has been her signature style since the early 1970s. This time, Abramovic has given us an installation of complete nothingness. When visitors arrive at "Generator," after locking up their belongings (all electronics included), they are then blindfolded by one of Abramovic's assistants, given noise canceling headphones, guided into the installation space -- a white room with nothing but padded pillars -- and simply let free. The rest is for them to decide, or as Abramovic said, "This is your own experience. It's up to you."

marina blindfold

There has been some criticism of Abramovic's latest work, mostly for its sheer absence of herself. At the start of our interview, the performer immediately recalled and quoted a New York Times' review of "Generator" which concludes by saying, "An artwork by [Abramovic] without her electric personal presence is like coffee without caffeine." Abramovic seemed hardly bothered by the negative response, explaining that what she's doing now is no longer about her, but about creating the next big step in performance art.

"I have this huge problem right now," Abramovic said, "because I'm in http://marinafilm.com/ some kind of threshold, pushing performance to another level. I don't know what it is. I have to go into it to understand the other side."

"You have to be lonely in order to understand everything, to understand why we are here."

The Godmother of Performance Art may not be certain of what it is she's trying to accomplish, but she knows that she wants to use art to affect and change audiences in deeper, more personal ways. And that now is a better time than ever. "I only know that people would not be ready for this kind of work 10 years ago," Abramovic said. "We needed so much to get back in touch with ourselves."

The artist blames our dependence on technology, our excessive visual consumption and the general fast-pace of life for distracting us from ourselves. There's so much going on in the daily life of a New Yorker that standing in a silent room, blindfolded and alone hardly seems like a realistic opportunity. Yet Abramovic has made it possible, and that room is there for each of us to use as we please. She recalled one frequent visitor to "Generator," a writer who comes almost every day to walk through the space for several hours. "Then he goes and writes," she said. "[People are] using this facility like a spa bank, like a brain spa, you know?"

generator inside

While on one level visitors can utilize "Generator" as a means of escape -- from our hectic environment, technology, etc. -- the installation paradoxically challenges us to do just the opposite with ourselves. "There are so many people incredibly afraid of spaces they haven't seen before," Abramovic noted. "Afraid of the human touch, afraid of energy that comes from people who you don't know."



Fear is a powerful word to use when discussing art, and it's definitely an apt one for "Generator," which forces visitors to blindly face that which we tend to avoid. Being alone with ourselves in silence can certainly bring about some intense and emotional reactions (as I can personally attest to), and as Abramovic said, it can "amplify the problems you have in yourself." But the only way to face that fear is to learn to trust ourselves, trust that even if we do run into a pillar or trip over another person, that maybe that contact is okay after all.

"You have to trust intuition, you have to trust this gut feeling we [are] completely fucked up with technology. Then you are kind of back into simplicity."

"I want to create the platform for the changing of the consciousness."

Like much of Abramovic's previous work, "Generator" confronts loneliness and aloneness in a way that tests audiences' comfort levels, nudging us towards embracement. "Loneliness is such an important state," Abramovic told me when asked about what the term means to her and her work. "You have to be lonely in order to understand everything, to understand why we are here. This is the main question we must ask ourselves: what the hell am I doing here? What is my function? What http://www.zillow.com/marina-ca/ is my purpose? When you find the purpose -- I was lucky that I knew somehow from the beginning. I focused all my life on that purpose."

generator quote

Abramovic's mission has been executed through various methods over her four decades of work, from her performances with Ulay to her recent collaborations with celebrities to developing the Abramovic Method at her Institute in upstate New York. Now that she's turning 68 this November, the artist is ready to start giving back what she's learned through her art.



"I've been doing this 40 years and to get where I am now, it takes a long time to actually trust that you can do things with nothing." Abramovic wants audiences to know that you don't necessarily need objects to make art or to trigger an experience. "It's about the energy," she said. "I really think that the future of art is that artists have to tap into this energy and give back to the public, and the public becomes active participants. This entire idea of the museum has changed because the public wants to be part of it -- not voyeurs anymore. They want to be part of something."

"You have to trust intuition, you have to trust this gut feeling we completely fucked up with technology."

If anyone is shifting the landscape of the performance art world and the active participation of audiences -- especially with younger generations, thanks to her collaboration with icons like Lady Gaga -- it's Abramovic. And while the artist has begun to remove her physical self from her work, it doesn't mean she solely considers herself a teacher now.

"I'm not any kind of fucking guru," Abramovic said, adding that her role as performer and teacher is constantly shifting. While she may not always be present in "Generator," she is by no means taking a backseat on her work. With numerous upcoming shows in Brazil, Tanzania, Australia, Denmark, Germany and Sweden, as well as several new film projects (no, sadly she's not working with Lars Von Trier and clarified that the two never officially planned to), Abramovic is constantly working towards her mission: "I want to create the platform for the changing of the consciousness."

Whatever happens inside "Generator," in the darkness and the silence, Abramovic trusts that it will make an impression on her audience. "This experience will never leave you, because it's inside."

"Generator" runs at Sean Kelly Gallery in New York through Dec. 6. This interview has been edited for clarity.

http://www.huffingtonpost.com/2014/11/26/marina-abramovic-generator_n_6214916.html

New [pounds sterling]3.5m boatyard for Premier's Chichester Marina.






Swanwick, United Kingdom, September 25, 2013 --(PR.com)--

Chichester Marina's new boatyard is now open and is set to

challenge the best on the South mercury outboard parts Coast. Based around the idea of

providing more integrated facilities, this unique boatyard layout offers

a full range of marine services set in a single location. But whilst the

facilities in the new yard are up to the minute, the boatyard's

sensitive architecture has a traditional style that has been designed

for low visual impact and will mimic the gentle, vernacular character of

the marina's existing buildings.

Marina Manager Graham Bristowe commented, "Chichester

Marina is set in a designated area of natural beauty, so whilst our

boatyard design had to be functional, it was paramount that it was

sensitive to http://www.babynamewizard.com/baby-name/girl/marina the preservation of the natural beauty of the harbour. We

achieved this by working closely with the local authorities, Chichester

Yacht Club and local residents."



Premier's old boatyard was built in the 1960's and

supported a thriving mix of marine service tenants who along with

Premier's boatyard services, attracted business from boaters

throughout the harbour. The new boatyard aims to enhance this heritage

by offering a larger, more modern, and fit for purpose complex that

builds upon the popularity of the old boatyard.



At the heart of the new boatyard is a modern boatshed with

dedicated rigging and maintenance units that flank a modern boat storage

area fit for working with temperature sensitive technologies. The

boatshed accommodates boats up to 50ft and will attract Premier berth

holders, visiting yachtsmen and tenants who will appreciate working

undercover, particularly in the winter. The new boatyard service

buildings wrap conveniently around the boatshed and house a mix of

retail space http://www.youtube.com/watch?v=0wXiJgCRH4Y and small-scale workshops that provide facilities for a

full range of complimentary marine services. The internal arrangements

in the buildings are also designed for maximum flexibility.



In spite of the current economic climate, tenants have been keen to

move into the new boatyard complex with just two units remaining.

Besides the relocation of existing tenants to the new boatyard, boat

sales companies such as Ancasta International Boat Sales and clothing

companies like The Marine Super Store and Coastal and Outdoor Living

have also been attracted to the site. Other facilities in the complex

will include The Boat House Cafe.



Contact Information:



Premier Marinas



Mark Hayward



01489 885000



Contact via Email



www.premiermarinas.com



Read the full story here: http://www.pr.com/press-release/517803



COPYRIGHT 2013 PR.com



No portion of this article can be reproduced without the express written permission from the copyright holder.

Copyright 2013 outboards Gale, Cengage Learning. All rights reserved.

http://www.thefreelibrary.com/New+%5Bpounds+sterling%5D3.5m+boatyard+for+Premier's+Chichester+Marina.-a0343794280

Home Depot mobile chief: Google’s Mobilegedon helped my company


Home Depot mobile chief: Google's Mobilegeddon helped my company | VentureBeat | Mobile | by Mark Sullivan

If you"re not reaching, engaging, and monetizing customers on mobile, you"re likely losing them to someone else. Register now for the 8th annual MobileBeat, July 13-14, where the best and brightest will be exploring the latest strategies and tactics in the mobile space.

http://www.marinabay-fl.com/ href="http://www.homedepot.com/">Home Depot mobile chief Mike Amend said that when Google recently changed its search algorithms to favor mobile content -- an event known in mobile circles as "Mobilegeddon" -- it actually helped his company's used boats search results.

Amend? told VentureBeat CEO Matt Marshall onstage at the MobileBeat conference that Home Depot saw a six? percent uptick in clicks on mobile entries after the change. It also saw a one percent increase in the effectiveness of its search keywords.

Many companies were punished for presenting a repackaged desktop browser experience on mobile.

Amend acknowledged that many customers arriving at Home Depot online content are getting there through mobile channels. "Our? focus is to be anywhere and everywhere our customers are," he said.

It's widely estimated that about half of Google searches are now done on mobile devices. So naturally the search company wants to rank mobile-friendly content higher in search results.

While Amend didn't give up any big secrets to Home Depot's success on mobile, he did say that winning in mobile search has a lot to do with following basic search engine optimization principles. Only a very small percentage of companies actually follow the accepted SEO best practices to make their sites more crawlable and indexable by the Google bots, Amend said.

Amend said that his company is just http://www.parks.ca.gov/?page_id=10915 now getting its feet wet in deep linking to content within apps. He says the yacht results he's seen so far are good, and that he's "bullish" on the future of deep linking.



VB's research? team is? studying mobile user acquisition... Chime in here, and we"ll share the results.

http://venturebeat.com/2015/07/13/home-depot-mobile-chief-googles-mobilegedon-helped-my-company/

Prince William on ‘full-time royal’: ‘No one actually really knows what that means’


Cele|bitchy | Prince http://harborcentremarina.com/ William on 'full-time royal': 'No one actually really knows what that means'



Bringing Charlotte home: "It has been fantastic and she has been a little joy of heaven. But at the same time it is more responsibility, looking after two little ones, especially when George is around. He's a little monkey.But it is fantastic having a lovely little family and I am so thrilled. And Catherine has been doing an amazing job as a mother and I'm very proud of her."

Whether they'll have a third child:"We've only just had the second one. You never know what is going to happen in the future."

What this job gives him: "For me it is also really important to be grounded. I feel doing a job like this really helps with grounding the core of what I am trying to become... just trying to be a good guy, trying to do what you can, trying be a decent individual, thoughtful. Qualities in people that you would want to be associated with.There's nothing to say I couldn't do it for the rest of my life. I might be able to, and still balance the two. But obviously at some point there is probably going to be a lot more pressure and responsibility from the other side of my life.At the moment I'm juggling the two of them, and a young family. I'm enjoying it, and I like the challenge, but yes, inevitably down the line, things will probably become a little bit more difficult for me to do that. But while mercury boat motors I'm still relatively young, I can manage the two jobs as best I can."



The idea of becoming a full-time royal: "The term, 'full-time royal role' is bandied around quite a lot, and no-one actually really knows what that means, but I think I can still manage to do my commitments and my responsibilities as well as I can.The Queen is still very active and is still showing incredible leadership. My father is doing many, many engagements, as are the rest of the family, and so there's a lot being done by the Royal family around the country. I hope to still be a part of that, and http://bulbapedia.bulbagarden.net/wiki/Marina_(Johto) do as much as I can, but equally do something which I think is incredibly important and [will] prove me in good stead for the future."

http://www.celebitchy.com/437188/prince_william_on_full-time_royal_no_one_actually_really_knows_what_that_means/

Marina Mix-50 Office Building (3B+G+22)-Lusail.


Construction Start: 01 April 2013

Project End: 30 November 2014





Project Status: Active





Project Phase: Execution - Construction



Project Location: Plot Mix/50 in Lusail Marina, Qatar



Facility Type: Building



Scope of Work:



Construction of Marina Mix-50 Office Building (3B+G+22)-Lusail.



Description:



The scope of the project includes the total base build works, all

interior finishes, complete electromechanical works/building services,

specialist systems such as vertical transportation-lifts and escalators,

waste disposal- garbage chute, building maintenance system- window

cleaning equipment, interior hard and soft landscaping in specific

areas, external works including hard and soft landscaping, traffic

control devices, parking signage and control systems, impact protection

system, external services such as plumbing and drainage- fowl and

surface water, irrigation system connection to authority mains including

district cooling for complete and operative building ready for its

intended purpose. The building is designed to sustainability standards

to achieve QSAS 5* rating.



Consultant:



Arab Engineering Bureau (A.E.B.)



country :Qatar



2014 Al Bawaba (Albawaba.com) Provided by Syndigate.info , an

Albawaba.com company



COPYRIGHT 2014 Al Bawaba (Middle East) Ltd.



No portion of this article can be reproduced http://www.purevolume.com/marinawareham/posts/9057393/Finding+the+Boat+Engine+Repair+Service+-+Marina+Wareham+Boatyard without the express written permission from http://www.instructables.com/id/ENQCLRJI4SCLN80/ the copyright https://www.oceaniacruises.com/ships/marina/ holder.

Copyright 2014 Gale, Cengage Learning. All rights reserved.

http://www.thefreelibrary.com/Marina+Mix-50+Office+Building+(3B%2BG%2B22)-Lusail.-a0368213395

Interesting Facts About Finback Whales


Quick Fact!



In spite of their heavy weight, finback whales can cruise at a speed of 35 miles per hour, and hence, are dubbed 'the greyhound of the sea'.

Finback whales (Balaenoptera physalus) have become endangered species. You may wonder why all such fantastic species of the oceans are becoming endangered suddenly? The answer is, previously, ships, vessels, and fishing aids were not so advanced; hence, the finback would deceitfully get away, owing to its speed. Also, to catch and ferry a thing as heavy as the finback whale, required some mean horsepower engines.

But with the introduction of new, modern, fast-paced, and high-tech engines and fishing aids, finback whales became easy prey. According to the Department of Inland Fisheries Wildlife, Maine, almost 30,000 finbacks were killed every year from 1935 to 1965. Commercial whaling was the biggest reason http://marinawareham.jigsy.com/entries/general/finding-the-best-boat-service-marina-wareham-boatyard for the dwindling numbers of these giants. Apart from whaling, a few other reasons, like accidentally getting entangled in fishing gear laid out for massive fishing of other fish, collisions with big ships, and changes in the marine ecosystem due to global warming and oil leakages, leading to scarcity of food are reported to have reduced their numbers. People trespassing their habitat for recreational whale watching also tends to disturb them. Although this does not cause mortality, it is still counted as one of the reasons that disrupts the marine balance.

Fin Whales: Some Interesting Facts

Scientific Classification

Kingdom

Animalia



Phylum

Chordata

Class

Mammalia

Subclass

Eutheria

Order

Cetacea

Suborder

Mysticeti

Family

Balaenopteridae

Genus

Balaenoptera

Types of Finback Whales

Northern Fin Whales (Balaenoptera physalus physalus), found in the Atlantic Ocean

Southern Fin Whales (Balaenoptera physalus quoyi), found in the Antarctic Ocean

Description

They are the second-largest mammal and living animal in the world, the largest being the blue whale. They grow to a length of almost 88 feet (26 meters) and weigh around 75 tons. The females are slightly larger and longer than the males. They have a slender and streamlined body, that helps them increase their swimming speed greatly. Their head is V-shaped and flat from above.

Finback whales are gray on the upper side and pale white on the underside. They also display asymmetry in color on the jaws. They are light in color on the right side, and dark and mottled on the left. On the rear end and the sides, the color of the skin is light gray to brownish black.

Two stripes, light in color, emerge from behind the blowholes and join at the upper side towards the tail, to form a V-shape. On the underside, they have around 50 to 100 pleats that run lengthwise, from the chin to the navel, to allow for expansion during feeding. It is for this characteristic that they are called 'rorquals'. On the top of the body, on the far back end, this whale has a prominent tall and hook-shaped dorsal fin that is around 2 feet tall.

Habitat

All major oceans are their abode. Normally, they are found in offshore and deep waters, at least 25 miles from the shore, and 300 to 600 feet deep water. Finback whales are not so common in the tropical regions. They prefer temperate and cool waters, but keep themselves away from the ice-packed poles.

Migratory Behavior



These whales keep moving in and out of high-latitude and cold-current feeding areas according to the seasons. The North Atlantic fin whales migrate southward in autumn towards the West Indies for breeding, whereas, the Southern fin whales, in summer, migrate from the Antarctic feeding grounds to low latitude breeding areas.

This migratory pattern is recorded over time by combining the information gathered by some extensive ship surveys and acoustic readings from passive-listening hydrophones, but their overall migratory behavior is still not clear.

Breathing

The breathing pattern of this whale varies with the kind of activity it is doing. While feeding, they http://www.dailymile.com/people/brentwpeterson/entries/31579717 will breathe 5 to 6 times quickly in one minute. On the other hand, when they are traveling or simply resting, they will only breathe 1 or 2 times in a minute. They rarely breach. One reason for such behavior is because they get scared very easily by moving vessels or ships, but keep moving around still ships.

Diving

Before a dive, they come to the surface and arch their back high out of the water, though the flukes are never visible out of the water. When they take a dive, they reach up to a depth of around 1,500 feet in a span of around 10 to 15 minutes, for feeding. When they want to rest or travel, they just dive a few hundred feet at a time.

Diet and Feeding

Finback whales feed through the baleen plates. There can be around 260 to 475 baleen plates in an adult whale, on each side of the mouth. The plates are seen to be around 30 inches in length, and up to 12 inches in width. At the end, these plates fray out into bristle-like hair.

When in the mood http://www.marinaandthediamonds.com/ to eat, these whales move at a speed of around 10 miles per hour. While moving, they open their jaws, and in one gulp, engulf around 70 cubic meters of water. Then they close the mouth and push all the water out through the baleen plates. The baleen plates trap their prey inside, while allowing the water to leave.

With each gulp of water, the whale gets around 20 pounds of food. It needs around 4,000 pounds of food every day to meet its energy needs. It will dive to depths of around 600 to 700 feet in search of sufficiently dense patches of prey. If it doesn't find food, it can even spend around three hours searching for it. They mainly prey on euphausiids like squid, crustaceans, copepods, krill, and herring.

A unique technique of hunting is seen to be followed by this whale. If it spots a school of fish and is not able to feed on them, it will keep circling them with high speed with its white side facing the prey. Out of fear, the small fish form a tight ball, and as soon as they gather together, it turns to its side and engulfs the mass of prey.

Breeding

The winter season is the mating season for these whales. They normally prefer temperate, low latitude areas for mating. The gestation period varies from eleven months to one year. A newborn whale will wean from the mother till 6 http://freshbeatband.wikia.com/wiki/Marina to 7 months of age. By this time, summer sets in, and the calf accompanies its mother to the feeding regions.

A female whale sexually matures between the age of 6 to 12 years, and then reproduces every 2 to 3 years. It is recorded that at a single time, a female can give birth to around 6 whales, but single births are more common. It is seen that the average lifespan of this whale is around 80 to 90 years.

Predator

Fin whales can only be attacked by killer whales, and that too when they are in groups. As I mentioned earlier, this whale gets scared easily, because of which it swims away to escape the area if attacked. It does not resist or fight its attackers. Very few such instances are recorded where people have witnessed an attack on a fin whale.

According to the World Wide Fund for Nature, this species is already under the risk of extinction, with only between 50,000 to 90,000 whales remaining, because of which the International Whaling Commission (IWC) has formed a body that regulates whaling. Iceland is the only country that still continues fin whale hunting.

http://www.buzzle.com/articles/interesting-facts-about-finback-whales.html

110 Clever and Funny Boat Name Ideas


Personalize it!



An easy way to mark your boat as your own is to give it your name. For example, you can add your name to a boat name, say the word obsession http://www.zillow.com/marina-ca/ can be made noticeable by changing it to John's Obsession.

Even though the mysterious sea waters are inviting, one may not achieve what Christopher Columbus or Vasco da Gama did in an open sea. However, you can still enjoy the sense of freedom that the open water gives you with your boats and yachts.

Even though owning a boat might be a little steep on the wallet, owning one is, without doubt, a matter of pride. You turn a captain in the true sense of your water vessel. To get the complete feel of captaincy, it becomes necessary to name your boat such that it means something to you. This would give you a sense of ownership.

Here is a list that holds some value suggestions for your boat's name, so sail through for the right pick!

Funny Boat Names

Whitewater

Piece of Ship

Reel Reckless



Ma Nauti Gulls

Bullship

Breakin Wind

Aqua-Holic

Nauti-Buoy

Swamp Donkey

She Got the House

The Codfather

Yeah Buoy

Vitamin Sea

Aboat Time

Cirrhosis of the River

Why Knot?

Knot Too Shaby

Miss Conduct

Egg-ta-Sea

Our Current-sea

Ship Happens

Fish Stalker

Crew Sin

Ta-Keel-La

Fish-n-Ships

Fishing R Us

Gypsea

Mr. Tip-Sea

Knot Flyin

Knot Workin

Happy Berth Day

Sea F O

Moby Debt

Fishfull Thinkin

Fuelin Around

Shore I am

Get Reel

Reely Mine

Shore Thing

Miss MyMoney

Unique Boat Names

Sea Spirit

Mental Pause

Totally Hitched

The Evil Death

Blue Water

All Day All Night

Freedom

Traveler

Silver Lining

License To Chill

Predator

The Hell-born Pirate

Lazy Dazy

Mermaid

Thriller

H2O

Valium

Mystic Blue

Vintage

Current Obsession

Serenity

Live Wire

Sea Hooter

Escapade

Liberty

The Fall of the Sea

Need for Speed

The Chest of Davy Jones

Thunder Cat

Caribbean Soul



Casa Aqua

Life Preserver

Breathless

Blue Highways

Life http://www.pearltrees.com/marinawareham/item134543739 is Good

Incognito

Misty Seas

Hydrotherapy

Lazarus

Stargazer

Serendipity

Meant To Be

Ariel

Silver Surfer

Noah's Ark

Good Boat Names from Movies

Titanic

Albavarden

Nimitz

Poseidon

Venture

The Boat

The Orca

Victorious Splash

The Black Pearl

The Belafonte

Alabama

The African Queen

Cotton Blossom

Red October

Das Boot

The Surprise

Incisor

The Flying Wasp

Rita

Andrea Gail

Seabourn Legend

Essess

Antonia Graza

Black Swan

Nautilus

In the end, it is important to name your boat not to impress others, but because it is of certain value and means something to you. And then, sailing on your favorite boat will be very joyful experience. Happy sailing!

http://www.buzzle.com/articles/clever-and-funny-boat-name-ideas.html

As Boating Season Approaches, Austinites Need Look No Further Than Freedom Boat Club


AUSTIN, Texas--()--With rainfall predictions near or above normal and an active hurricane

season for 2014, according to the Farmer's Almanac, Austin may be seeing

a full lake this season. To make this active summer season more

convenient and enjoyable than ever, Freedom Boat Club is expanding its

fleet in preparation for a busy boating season.

Freedom Boat Club is a members-only boating club that provides a simple,

sophisticated alternative to boat ownership. With 24 boats to choose

from in the Austin area alone - ranging from wakeboard and ski boats to

pontoons and deck boats - Freedom Boat Club removes the hassle of boat

ownership. Members simply make a reservation with their preferred boat

and show up at one of two Austin locations. The boat is ready and

waiting with a used outboard motors full tank and knowledgeable staff. Members, along with

any guests, depart and enjoy their day on the water. When finished, they

simply return the boat to the dock and head for home. With Freedom Boat

Club, there is no worry of maintenance, cleaning, launching or storing

the boat; the staff takes care of everything.



"Over the years I have owned, rented and leased boats for my access to

water," said Jim Bailey, Freedom Boat Club member. "Each option came

with its own set of problems. I joined Freedom Boat Club about five

years http://www.merriam-webster.com/dictionary/marina ago. They make boating easy, and it has cost me less than any

other option. Great boats, great staff and lower costs for fun."

With five new boats for the 2014 season already added to the fleet -

including two 2014 Tritoon Caribbeans with 250 outboards and three

Ebbtide Bowriders - and an expected four more by mid-summer, Freedom

Boat Club provides its members with the newest and most reliable boats

on the market.

"We choose brands based on performance, feel and reliability," said Bill

Marquardt, co-owner and operator of the two Austin locations. "We want

boats that people can be proud to be seen in, but just as importantly,

we want them in safe and reliable products."

In addition to its recent growth, the Texas division of Freedom Boat

Club was honored as used boats for sale Franchise of the Year at the company's annual

gathering held in December 2013. The Texas division was recognized for

its growth in membership and revenue, as well as its exceptional

customer service.

"Winning the Franchise of the Year was a huge honor," said Marquardt.

"The Austin area was in a severe drought last year, and we still managed

to have a successful year, which speaks volumes to the experience we

provide at both our convenient locations. We have already seen a

successful start to the 2014 season and are on pass to exceed last

year's numbers."

Marquardt is using the franchise's growth to give back to the community

and recently donated a one-year membership ($8,000 value) to the 2014

Dell Children's Gala Raffle, benefitting the Dell Children's Medical

Center of Central Texas.

To learn more about Freedom Boat Club, become a member or find the

nearest location, please visit www.FreedomBoatClub.com.

About Freedom Boat Club

Founded in 1989, Freedom Boat Club is the world's largest members-only

boating club, providing a simple alternative to boat ownership. Freedom

Boat Club boasts more than 75 franchise locations from seashores to

lakeshores, each providing a http://marinafilm.com/ fleet of boats that come with less stress

and a lower price tag than owning a single boat. To learn more about the

Freedom Boat Club, visit www.FreedomBoatClub.com.

http://www.businesswire.com/news/home/20140423005076/en/Boating-Season-Approaches-Austinites-Freedom-Boat-Club

Living Aboard Argonaut II: A Classic Wooden Yacht


Living aboard the Argonaut II is part living in a museum, part living in an RV, part "living the dream," and part just a very ordinary life.

Since we live aboard a classic wooden yacht, build 92 years ago, with many of the original systems intact, we do in effect live in a museum. Some of the original artifacts of Argonaut II are also on display at the Maritime Museum in Victoria, British Columbia.

Here's the story of how my husband Jerry and I came to Seattle boatsandoutboards and ended up purchasing the classic wooden yacht Argonaut II .

So, here goes...

In May of 2006, we sold our off-the-grid house in the Jemez Mountains of New Mexico to the perfect, maybe the only, couple for the place. Not many people want http://www.topix.com/city/marina-ca to maintain their own electrical system, road, and all the equipment necessary for living remote. They purchased our house, furniture, bulldozer, tractor, unimog, etc., after our house had been up for sale for less than a day. Things just worked out perfectly. Basically, Jerry and I left New Mexico with our clothes, dishes, sheets and towels, and Jerry's tools.



We came to Seattle and looked at two boats, the Sally S . and Argonaut II. Argonaut II , a 1922, 73 foot classic wooden yacht, was our choice. After a sea trial, haul-out, and survey, we purchased her and moved aboard the second week in May. Along with the boat came the dock space at a marina in Ballard, a really fun, interesting part of Seattle. We are on the porch, which is a dock on the outside of a boathouse, located right inside the Ballard Locks in the shipping canal leading to Lake Union and Lake Washington. In addition, we were also inducted into the Pacific Northwest Classic Yachting Association, a great group of folks who love old wooden boats.

http://lee-b.hubpages.com/hub/Living-Aboard-Argonaut-II-A-Classic-Wooden-Yacht

Tips On Using Zinc Anodes To Your Advantage In The Marine Industry


Zinc anodes are becoming almost indispensible in the marine industry. Zinc has been used in various sectors right from automobiles to construction to furniture to even utensils. But when used in the marine industry, zinc proves to be an excellent anti-corrosion solution.

Aluminum anodes are also largely used in the marine industry. They are suitable for use in a tropical water environment. Aluminum anodes are known to last slightly longer than their zinc counterparts.

Why use boat zincs?



Boats and marine vessels are in constant touch with sea water, which causes corrosion in metals. If left untreated, corrosion can prove to be a hazard to the boats and ships and could even lead them to sink. This applies not just to boats, but also to other marine structures such as jetties, ballast tanks, propeller shafts etc. Salt water and brackish water call for the use of marine anodes.

How does a zinc anode work?

Zinc anodes are also known as sacrificial anodes because they sacrifice themselves to protect the ship or vessel from corrosion. Corrosion is essentially a natural phenomenon that is caused by small electrochemical currents that pass between the submerged used boats metal and sea water. But when an anode is affixed to that particular metal, the currents are re-routed to the anode instead of the original metal.

However, this is only possible if the anode is more reactive than the metal it is fixed onto. This is also the case with other commonly used anodes such as aluminum anodes. Anodes can also be found in places such as submarines, underwater oil pipelines, bridges among other things. These anodes can either be mounted directly on the metal structure that needs protection. Alternatively, it can also be connected with the help of a wire to ensure cathodic protection. Investing a small amount in anodes saves your expensive marine vessels and other equipment from rust.

While zinc and aluminum are preferred in seawater, magnesium anodes are increasingly used as a suitable anti-corrosion solution in brackish water. However, while using anodes, do remember that you need to constantly monitor them and when they get worn out, you need to instantaneously replace them. If they are not replaced on time, the corrosion could spread to the hull of your boat or ship. Since such anodes are used in boats, they are known as boat zincs.

When http://www.marinaandthediamonds.com/ you purchase zinc anodes, it is advisable to approach a reputed manufacturer who will be able to offer quality products. Anodes tend to be heavy in weight; hence it is preferable to consult the manufacturer in order to select the most suitable anodes.

About the Author:

ZincWarehouse.com has been involved in the Marine industry for over 25 years. Over time we have used all major brands of boat zincs.We supply many customized special order Aluminum Anodes Magnesium Anodes with short turn around times.

http://www.articlesnatch.com/blog/Tips-On-Using-Zinc-Anodes-To-Your-Advantage-In-The-Marine-Industry/3453404

Do you prefer the name Marina? Is it lame?


Report Abuse

Additional Details

If you believe your intellectual property has been infringed and would like to file a complaint, please see our Copyright/IP Policy



Report Abuse

Cancel

Report Abuse

Additional Details

If you believe your intellectual property has been infringed and would http://marinawarehamboatyard.blogspot.com/2015/01/discovering-best-mooring-service-marina.html like to file a complaint, please see our Copyright/IP http://www.mapquest.com/maps?city=Marina&state=CA Policy

Report Abuse

Cancel

Report Abuse

Additional Details

If you believe your intellectual property has been infringed http://www.imdb.com/title/tt2614860/ and would like to file a complaint, please see our Copyright/IP Policy

Report Abuse

Cancel



https://answers.yahoo.com/question/index?qid=20150429055117AA4bzJF

Beck Racing Engines




All machine work is performed boatsales in our own facility using the latest state of the art technology available today. Every engine is fully blueprinted and balanced, individually machined and assembled. Our engines undergo a numerous series of assembly procedures before final assembly and dyno testing tuning.

Our goal is to build maximum performance and reliability into an engine that will give years of trouble free operation. A glance through http://www.youtube.com/watch?v=PJv4KiPJkcs our brochure gives a good indication of the quality, power and torque we make from our Chevrolet engines.

We strive to and excel at delivering reliable horsepower for your driving pleasure and excitement. We've developed a world wide reputation for building some of the best and most reliable dyno proven Chevrolet engines around. We have engines and cars winning races and car shows all across America and in numerous countries around the world such as Germany, Norway, England, Sweden, Switzerland, Aruba, Jamaica, Canada, Mexico, New Zealand, Australia, Thailand, Japan and beyond!

Whether it's road racing, vintage motor sports, drag racing, Bonneville, Baja, Mud bogging, tractor pulling, drag boats, poker run, pleasure boats, off shore race boats, hill climbing, mud bogs, off roading, desert racing, sand duning, 4 wheeler's, rock crawlers, pro street, pro touring, hot rods, show cars, cruisers, or factory original muscle cars, we have a package for you!

Since then, BRE has built countless engines that have won all kinds of races, shows, events, been in numerous magazines, have set track records and have been class champions in numerous race circuits, from drag racing, road racing, mud bogs, Baja off road racing, drag boats, to Bonneville beyond!

So what makes us different from the hundreds of other engine builders out there that all claim they make the best product for the money?

http://m4verick.hubpages.com/hub/Beck-Racing-Engines

Everything Everyone Needs To Realize About Boat Sales In Todays Economic Climate


In the current financial condition, it isn't astonishing that the figure of boat sales is decreasing, like the the decline in the boat prices. A portion of the trouble is that it is becoming increasingly harder for people to find the finance to be able to make such a major purchase. But, with prices of boats falling by a minimum of 50 percent, and in a few cases 75%, there is no better time than now to buy the boat of your fantasy. If you are not planning to pay for it upfront a finance company which can provide you support, and is able to work with you in benefiting from the present monetary scenarios.

A few aspects will have to be taken into consideration when you are about to purchase a boat, one of which is if you should buy a new boat , or a used one. This http://www.babynamewizard.com/baby-name/girl/marina is actually depends on http://www.parks.ca.gov/?page_id=10915 your individual selection, and there are some wonderful deals available no matter what you choose. The chief point which is advisable to take into https://marinawarehamboatyard.wordpress.com/? p=4&preview=true&preview_id=4 consideration is value. In case a boat is spotless and in a good condition, then the chances are more advanced that it will be trouble free for its owners.



If you purchase a boat which seems to be a real bargain, specially if they are charging a lesser amount than similar models, then caution must be exercised. Motors, rudders and other major mechanisms can cost a small fortune if they are amiss. When it concerns boat sales, buying a cheap boat and getting the money to cover it is all well and good - but if you then have to spend tens of thousands of dollars on keeping it in a good condition, your buy may not be a happy one.

If you acquire a good quality product, then you should not have cause to be anxious. But always do ample research; find out what similar models are selling for in other places, and be wary of a price that is considerably lower than usual. If it looks too good to be true - it usually is. However, the fact remains, because there is no blue or red book in the matter of boat prices; there is greater price difference than with cars.



Vehicle prices are just about the same all over the country, because dealers use the blue or red book to harmonize their prices.When it comes to boats, there's no such standard. The price is dependent upon how much the seller wants, how keen they are to sell, and what price the purchaser is willing to pay.

For this reason, there's a lot more potential to bargain and barter - trying to bring the rate lower. If http://www.eteamz.com/marinawarehamboatyard/news/index.cfm?id=5839484&cat=0&SitePage= your loan has already been approved of then you can do this more effectively. You should have had a look at the financial prospects, such as accepting the accurate finance deal to be able to purchase of the boat. Once you know how much you can exactly afford, and having an approved finance deal puts you in a much stronger position to get yourself a good deal.

In the case of paying for a boat - for the majority of people the second most expensive item they'll purchase - it's important to have the proper financial arrangements. Although it is occasionally probable to acquire a boat loan which will cover the price of your purchase, this is not what should be done. It isn't prudent to visit your local bank and request for a boat loan. Very evidently it is very unlikely that your local bank will have any idea about boat sales, and so will be unable to give you any advice in the way of the sale, the price, depreciation value, insurance and other associated costs and implications.

Instead, it's always a good idea to use a company that is knowledgeable about the sale of boats, and all the features of buying a boat which will have to be taken into deliberation. For example, insurance cover has to be arranged for boats. Sadly, it does happen that boats are vandalized, and weather conditions can also cause harm, or even sinking or capsizing. These will need to be taken into account. How will you repay the loan if the boat was lost or damaged?

A boat loan which also includes proper insurance will not only help in making you stress free when looking for boat sales, but is more probable to have a lower interest rate and thus being of greater benefit in the long run. There's no reason why boat sales should be hard work, but it will certainly be less difficult to use a company that is knowledgeable about boats, not just boardrooms.

http://www.infobarrel.com/Everything_Everyone_Needs_To_Realize_About_Boat_Sales_In_Todays_Economic_Climate

Richard Burton's love boat for sale.


Byline: STEVE BAGNALL

THE yacht on which Welsh acting legend Richard Burton romanced Liz

Taylor is on the market forl $4m.



The 165ft Kalizma, which is currently moored in Malta, was bought

by Burton in 1967, the year after Elizabeth Taylor won a second Oscar

for http://vermontmarina.com/ her performance in Who's Afraid Of Virginia Woolf.



The couple boat motors renamed the Edwardian motor vessel Kalizma after their

children, Kate,Liza and Marie.



The dining room was furnished with antiques, their bedroom boasted

a four-poster bed and millions was spent on the works of art which

adorned the yacht's walls.



An entry in Burton's diary for October 28,1968, said: ``The

Monet is in the living room or salon, the Picasso and the Van Gogh are

in the dining room.''



The boat is being sold through luxury yacht brokers, Cavendish

White.



MD Michael White said: ``The person who currently owns it is buying

a bigger yacht and they approached us to sell it.



``For its era it is an extremely famous yacht with a lot of history

attached to it.



``If you want an historic yacht, there are not too many around

these days. A lot have been lost over the years.''



Burton and Taylor were one of the original celebrity couples.



Twice wed and twice divorced they enjoyed a famously tempestuous relationship.



Burton,born in 1925 at Pontrydyfen,near Port Talbot, is still

regarded as one of Wales' major international stars.



The elegant yacht was the setting for a number of drink fuelled

parties with the Hollywood wild set.





Guests invited to the yacht included Richard Harris,Peter

O'Toole, John Huston and Peter Ustinov.



The yacht sleeps 10 plus a crew of eight.



A Cavendish White spokesman said the yacht has undergone extensive

refurbishment by its current owner who has http://www.youtube.com/watch?v=0wXiJgCRH4Y restored the vessel to its

original Edwardian splendour, including a new air conditioning and

entertainment systems.



http://www.thefreelibrary.com/Richard+Burton's+love+boat+for+sale.-a0114434196

The Importance of Car Batteries


Many people pay attention to the exterior parts and transmissions of their cars, but they used boats for sale often forget that car batteries are equally important. Car batteries supply electric energy to cars. They are rechargeable batteries that are often replaced by car service centers.

There are things that a car owner must consider before http://animalcrossing.wikia.com/wiki/Marina buying a new car battery. There are two conventional types of car batteries - low maintenance or nonsealed, and maintenance-free. Low maintenance batteries are recommended for vehicles used in hot weather.



Maintenance-free batteries offer more advantages to car owners. They have longer operational life, faster recharging time and greater overcharge resistance. The downside, however, is that maintenance-free batteries are more prone to deep discharge, also known as dead battery. In the current times, car manufacturers have introduced a dual type of car battery. Dual marine batteries combine a standard battery with switch-able emergency cells, which makes it look as if two batteries are working as one.

A car buyer planning to buy a battery should consider the Cold Cranking Amps (CCA) level of the battery. CCA measures used boats the battery's ability to start your vehicle in cold weather conditions. Very low temperatures can cause motor oils to thicken, which makes starting engines difficult. CCA information is provided by most car shops or used car dealership. Orange County car experts believe that higher CCA rating is needed for cold environments.



The second most important thing to consider is the reserve capacity. It is the number http://www.ci.marina.ca.us/index.aspx?NID=17 of minutes your battery can run your car, should your alternator fails. A fully charged battery usually has 25 amps reserve capacity. If it falls below 10 amps, it is time for you to get a new battery from your used car dealership. Orange County car battery shops offer battery recharging and sell fully charged car batteries in case you don't want to wait.

Aside from CCA, reserve capacity and battery size, a car owner must know the right place to buy car batteries - manufacturer's stores, car shops, car service centers, or used car dealership. Orange County car dealers advise their customers to avoid buying car batteries from gasoline stations or retail stores, which might be unreliable.

http://car.ezinemark.com/the-importance-of-car-batteries-16d81376d94.html

Article on Luxury Yacht Charters


If you're planning on going on a cruise for a birthday, anniversary, wedding, or any other celebratory event, then Gulet cruises is one of the best cruises that will work with your budget.

Gulet cruises offer luxury yacht charter and private yacht charter services for just about any occasion.

Gulet cruises offers many other services such as special offers, which allows our guests to book their cruise at the last minute, without having to worry about the added expense that you would have to deal with anywhere else.

Our last minute Gulet cruise option seems to have garnered much deserved praise due to our cruise discounts which range from 10-15%.

If you're looking for something a bit more luxurious, Gulet cruise also offer other stylish cruises including everything from the Gulet Blue Star deluxe VIP cruise, the Gulet Andi, Gulet Arif Kaptan A, Gulet Blue Eyes delip VIP, the Gulet Ecce Sultan, Gulet Priv Odisej, and the Gulet Yorgun 1.

The best thing about Gulet cruises is that we are not ordinary holiday cruise line. Instead, we operated more like a cruise operating company.

When you check out a hotel here a Gulet cruises, you can expect the conditions are exactly mercury marine the same everytime you rent out a room or even request for a half board, or a full board.



When it comes to our cabins, the standard Gulets offers a large cabin that includes private showers and private toilets with plenty of comfort. The maximum capacity is up to 3 people per room.

The luxury Gulet is one of the best cabins we have to offer. With the luxury Gulet cabin, you'll receive anywhere from 3 cabins to 16 cabins, along with air conditioned cabins, showers and http://www.yourdictionary.com/marina toilets in each cabin.

The luxury cabins also offer the same high quality service that you would receive in a 4 to 5 star hotel, at a much reasonable price.

So remember, the net time you plan your next trip with friends, family, or with your significant other, Gulet cruises should be in your list!

http://www.selfgrowth.com/articles/article-on-luxury-yacht-charters

Painting Your Yamaha Outboard by Gerrie Lijzing


Because of scratches in your paint on your Yamaha outboard motor, corrosion and other damage can occur. Whenever you bumped your Yamaha engine and damaged the paint you should fix it quickly and efficiently with high quality http://marinas.com/ Yamah paints and primers. They are specially developed for water sports and guarantee the best matching colors.

Before spraypainting your Yamaha outboard motor, make sure that http://marinawareham.soup.io/post/522953376/Finding-the-Best-Mooring-Service-Marina-Wareham the aluminum is well dried. This you achieve by storing the part in a dry space for a couple of days, in a dry shed for instance.

If you have stripped the aluminum Yamaha outboard parts of all paint, it is best to treat the aluminum first with sinc-primer. This will guarantee a good connection between the aluminum and the paint. The sink primer is not suited for the outboard motor top cowling, only for the aluminum and steel outboard parts.

Before you start spraypainting your outboard motor, the surface has to be well sanded, dry, without dust and be cleared of grease.



The most important part of spraypainting your Yamaha outboard motor is the sanding part. The smoother the aluminum is sanded, the more the endresult will be satisfactory. First use sanding paper that is rough, after this use more and more finer sanding paper.



It is better to apply several layers of thin spraypaint in stead of using one thick layer. Between every layer wait for a few minutes, but never longer than 30 minutes. After applying the spraypaint on your outboard parts, make sure the paint is well dried. The best is to wait for 24 hours before doing more work on your Yamaha outboard motor parts. For more info pls visit http://www.aussenbord.de/allprods.php

http://www.articlecity.com/articles/auto_and_trucks/article_2507.shtml

Boating Dangers: How to Avoid Risks Video


Transcript for How to Avoid Boating Dangers

Back now at 7:42 with "Gma" invaes Gates. The dangers of pleasure boating. So many people out on the water right now. So many boating accidents are totally preventable if you http://marinawarehamboatyard.blog.com/2015/01/12/finding-the-best-boat-repair-marina-wareham-boatyard/ follow http://nameberry.com/babyname/Marina simple rules. Matt Gutman has the details. Reporter: This year's july4thfire works are just finishing up when frantic calls come over the radio. We have a serious collision out here. The boat is breaking apart. Reporter: A deadly collision. Three boats, 20 passengers. A harrowing situation. People are in the water. I'm pulling one in right now. Three are injured. One not breathing. Reporter: Four people died. This is probably the worst accident I have seen in my 11-year history. Reporter: Last year, 4,062 boating accidents. 736 in Florida alone. Do we know what happened? We believe once the fire works display ended, traditionally, people try to rush to the nearest marina. Reporter: George and his team at the fish and wild life conservation commission are the primary law ens form agency on these waters. We wanted a closer look. We tagged along with him and his team for three days. What kind of things a you looking for when you scan the or rising here? He's listening to the radio. He's maintaining a proper lookout. Making sure he looks back occasionally. It's constant vigilance. Reporter: On a quiet day, still plenty of action. This boat is being pulled over by fish and wild life baud it's moored right in the channel. They say it shows a lack of common sense. And this jet skier may have broken rules. Did I do something wrong? Yeah. You had that open and you don't have a life jacket. Reporter: He's not wearing a life jacket and his lanyard, the cord to turn off the jet ski should he fall into the water. Today he's ticketed. What is the single dumbest thing you have seen? Kids not wearing a life vest is my pet peeve. Bow riding. People riding in the front of the boat with their feet hanging. Time and time again, a father rides over a daughter. Reporter: Sure enough, a few bow-riding right in front of us. Today, they're cite also. What is the number one key for boert safety here or anywhere? The bottom line is don't operate a vessel while intoxicated. Wear your life vest. Pay close attention to what you're doing on the water ways. Hold on. Reporter: Back on pra troll, a crisis unfolding. A boat full of passengers, sinking. And few of them know how to swim. A few more minutes, this boat would be underwater. With the help of this boater, they get everyone to safety. They started panicking. Reporter: If you hadn't been there, the boat would have gone down. For sure. We would have had O or two deaths because a lot of the people on board did not know how the swim. Reporter: Of the 560 people who died in boating accidents last year, 77% of them drowned. 84% of those were not wearing life jackets. Fortunately, today, none of those 11 boerts became part of that is itstatistic. Saved only people. Thank you, Matt. Life jackets are key.



This transcript has been automatically generated and may not be 100% accurate.



http://abcnews.go.com/GMA/video/boating-dangers-avoid-risks-24548875

Painting Your Boat The Inexpensive Way


When buying a pre-owned trawler or motor yacht, it's easy to be turned off by the exterior looks of the boat. However, I'm not proposing that it be dismissed. I inform buyers to gage how good the used trawler or motor yachts been maintained by how she looks. If the gel coats all beat up and the brightwork is in terrible shape, I normally find the rest of the boat the same way. It's simply an indicator.

But a dull outside isn't a terrible thing either. The gel coat on a used trawler or motor yacht is there for a single purpose, to make the yacht look good. It has no other function. The gel coats worst enemy is the ultraviolet rays of the sun. After 5-10 years exposure in the tropical Florida sun, almost all gel coats begin to dull and chalk up. Not even intense polishing will take the gel coat back to the luster when it was new. So when you find a used trawler or motor yacht that has a dull outside but the rest of the boat is up to par, there is a simple way to salvage her. How can we do that, by painting her?



When we purchased our trawler the Patricia Ann, she was in very good shape, but her gel coat was dulled and there were a few minor fiberglass nicks here and there. Professional painting of a used trawler or motor yacht is no inexpensive task. You can plan on about $1000 a foot to have it painted professionally so that was unthinkable.

I started to explore the procedure of performing the painting myself and read as much as I could about what paint would be best and how to do it. At the Ft. Lauderdale Boat Show, I talked with spokespeople from Interlux. The rep told me that both the Interlux brand of topside paints and the Awlgrip brand are very synonymous in preparation and practical application. Interlux, even so, is formulated for the do-it-yourselfer. So my choice was made, Interlux Perfection, two part paint was the way to go.

Without going into detail about what the directions state, let me just say that although working with two-part paints looks frustrating, it's really very simple to do. Just stick to the directions supplied with each can of paint and you'll get the hang of it immediately.

I selected the roll and tip technique of practical application as spraying in a marina was impossible. It's easy to do once you practice. I practiced on a scrap piece of glass until I had it down pat. Instructions are supplied by Interlux.

Here are a couple of pointers.

Begin your project by separating the used trawler or motor yacht into workable sections; that way the project will not overwhelm you. I selected the port bow pulpit on the Patricia Ann to start my plan.

Preparing the surface to be painted takes about 3/4 of the time you will spend on your project. A bad surface will create a bad paint job. Start by cleaning the gel coat http://marinawareham.soup.io/post/522953376/Finding-the-Best-Mooring-Service-Marina-Wareham with thinner. This will rid the gel coat of any silicon that may have been applied that will make the paint lift after application.

The next step, take a little hammer and check out the entire area to be painted, taping to find any voids below the gel coat. When you find them and you will, grind them down with a Dremel tool. You don't want to spend the money and time to do a good paint job and have voids open up later on.

I used the West System epoxy resin with the fairing filler to repair the voids I found. Follow the directions provided to make the resin simple to use. Sandpaper them flat after the restored spots have dried. Rinse the dust off with water.

The hard part is not over yet?

Now we must tape the region that's going to be painted and take off any hardware to cause it go easier. I applied the 14 day painter's tape in stock at Lowe's or Home Depot for masking.

Now it's time to paint. I used a 4 inch foam roller and the best 2-1/2 inch natural paint brush I could find, also in stock at Lowe's. Mix just enough paint that you can use in 2 hours, for me its 1/2 quart. The paint is pricey, about $85.00 a quart and you don't want to be throwing any away.



Only apply paint when the outside humidity is 75% or lower. Be certain there is no chance of rainfall.

The paint takes about 5 hrs. to fully harden. Be careful to complete your paint application no later than noon to provide complete drying. If dew http://marinawareham.jigsy.com/entries/general/finding-the-best-boat-service-marina-wareham-boatyard settles on your paint, the moisture will turn the high gloss to a dull finish. I use a window between 10 AM and noon to paint.

All said and done, it took at least 600 hours to prep and paint the Patricia Ann. We used about 1 gallon of West System resin and 12 quarts of Interlux Perfection to paint http://www.topix.com/city/marina-ca two coats on her.

Was it worthwhile?

Absolutely! She looks beautiful!

If you have been contemplating the painting of your used trawler or motor yacht and would like to ask me some specific questions, feel free to ask.

By: Marinetrader

Article Directory: http://www.articledashboard.com

Mike Dickens, the author, is a liveaboard boat owner and owner/Broker of Paradise Yachts in Florida USA.



Paradise Yachts offers used quality yachts to customers worldwide.



Visit the Paradise Yachts website to view our selection of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale



National and international sales. We ship Used Yachts and Used Boats worldwide. Located in Florida, USA. 904/556-9431

http://www.articledashboard.com/Article/Painting-Your-Boat-the-Inexpensive-Way/1355740

The Grateful Dead Celebrate 50 Years and Say Fare Thee Well to the Tribe


The Grateful Dead Celebrate 50 Years and Say Fare Thee Well to the Tribe

Jay_closing_photoThis past weekend " July 3, 4, and 5 at Soldier Field in Chicago - the "core four" surviving members of legendary rock band the Grateful Dead played their final three 50th anniversary Fare Thee Well #Dead50 reunion shows, a celebration of longevity, peace, friendship, and love.

Members of the most iconic band in history " Bob Weir, Phil Lesh, Billy Kreutzmann, and Mickey Hart - will continue to play in their own bands and in ad-hoc combinations, but these shows have been billed as the last time for the full team to play together. Joining them on stage in Chicago were Phish front man Trey Anastasio on lead guitar and vocals, with Bruce Hornsby and Jeff Chimenti on keys and vocals.

The faithful converged for what proved to be an epic sendoff. As we entered the arena on Friday, the laid back vibe was set as everyone was given a red rose.



We were all here - hippies, hangers on, party animals, spiritualists, investment bankers, students, US Senators, surfers, yogis, CEOs, NBA Basketball Hall-of-Famers, marathon runners, bestselling authors, couch potatoes, organic pot farmers, militant tapers, Grateful Dead trivia savants, Golden Globe winning actors, plumbers, flower children, real estate agents, obnoxious "woo hoo" screamers, hipsters, posers, famous musicians, university professors. All of us were here. We had to be. It was the end of an era.

Prior to the shows, President Barack Obama who calls Chicago home and is reportedly a Deadhead, issued a statement describing the Grateful Dead as "an iconic American Band that embodies the creativity, passion and ability to bring people together that makes American music so great."

The entire city of Chicago was in on the act, and even some flight crews on planes arriving into O"Hare on Friday played along by cranking the Grateful Dead as deplaning music. Chicago police were with the program. I noticed several sporting a red rose in their lapel. Even the weather gods played a part, serving up the most beautiful weekend Chicago has seen in 2015.

Building a Passionate Fan Base

A Grateful Dead concert is more than just, well, a concert. It is a happening, a destination, and for the most diehard fans it is their lives.

In his comments from the stage, Phil Lesh only used "we" saying the Grateful Dead is as much us, the audience, as much as the musicians. We"re all part of the Deadhead community, a sort of club with 50 years of history and traditions but one that is open and inclusive of anyone who wants to join.

On multiple occasions during songs like Ripple, Scarlet Begonias, Jack Straw, Bertha, and Not Fade Away, all 70,000 of us in what often felt like an intimate theater, a church of music, locked onto the same vibe, uniting as one living, breathing, sweating, dancing organism, channeling our ecstatic energy into a feeling I"ll never forget. Seventy thousand fans dancing and singing as one literally rocked Soldier Field"s stands and locked minds into one driving force. Band members fed off the energy, pushing them ever further, circling back to drive the audience to unimagined heights.

Marketing Lessons from the Grateful Dead

The Grateful Dead played over 2,000 live concerts from 1965 to 1995, establishing the band as the most popular touring act in rock history. While the band also saw success with 13 studio albums, it was the live concert experience that set them apart. The Grateful Dead created a free-form live sound that combined elements of many different musical styles (rock, country-western, improvisational jazz, gospel, and more) to create a completely new and unique sound. I wrote about this in an article titled Employee Team Building Lessons from the Grateful Dead.

We"re in the middle of a marketing revolution. The changes ushered in by the Web have created a profound upheaval in the ways that all people and organizations communicate with their customers, buyers, employees, and the media. The Web and mobile technologies are the preferred communications tool. Rather than relying solely on expensive advertising or convincing the media to tell the story, smart companies now communicate directly to interested audiences"for free"on social networking services.

Bill_WaltonIn the 1960s http://freshbeatband.wikia.com/wiki/Marina the Grateful Dead pioneered many social media and inbound marketing concepts that businesses across all industries use today. The band made a series of difficult and often unpopular decisions in order to differentiate themselves from their competition by providing the highest quality service to their fans. They were not simply selling a product.

The Dead pioneered a "freemium" business model, allowing concert attendees to record and trade concert tapes, building a powerful word-of-mouth fan network powered by free music which I wrote about last week in my post Make it Free: Fifty Years of Content Marketing Grateful Dead Style. Instead of obsessing over recording, the Dead became the most popular touring band of their era, selling hundreds of millions of dollars worth of tickets, creating a highly profitable corporation in the process. Without hit records, the Grateful Dead achieved elite success, becoming one of the most iconic rock bands of its era and inventing a brand that democratically included their consumers (and literally co-created a lifestyle for Dead Heads).

Successful marketers continuously develop strategies based on those used by the Dead, shifting focus away from products to customers in order to create demand. Marketing Lessons from the Grateful Dead, my book with Brian Halligan and with a foreword from our friend Bill Walton who is the world's largest Deadhead and has seen the Grateful Dead perform more than 850 times(!), shows how to think and market like the band, which is to think and market differently than your competition. We were able to connect with Bill before yacht the shows on several nights and he was happy to celebrate with his favorite band.

Technology at Work in Soldier Field

The Grateful Dead has been pushing the technological boundaries of music for decades. The legendary concert experience"which inspired people to drop out of predictable lives and follow the band from city to city"included customized setups so elaborate the band had to create the systems because there was nowhere to buy the technology infrastructure.

Rolled out for the first time in 1974, the Wall of Sound took eight years of experimentation, $350,000 to create, and used 26,400 watts of power from fifty-five McIntosh 2300 amplifiers. It was so far ahead of any other rock band"s concert sound system, it catapulted the Grateful Dead into a different music-technology solar system. "The Wall" was also a visual work of art, including over 600 speakers (88 JBL fifteen-inch, 174 JBL twelve-inch, 288 JBL five-inch, and fifty-four ElectroVoice tweeters) in a huge geometric pattern that caused concert-goers to literally gasp when they first saw the setup.

Throughout the decades, technology has continued to be an essential element of live shows. For example, in the 1980s a $30,000 harmonic analyzer originally designed by NASA to evaluate the aerodynamic strength of metals was added to the live show equipment.

The same focus on technology abounded at the Chicago shows boat sales this weekend. There was a stellar sound system featuring crisp and bright Meyer Sound speakers that painted the entire audience. The lights were phenomenal. And the video screens were crystal clear with added video enhancements that channeled the music into a trippy visual experience.

The little extras served up by the promoters added to the experience. Fireworks boomed for two out of the three nights. On the Fourth of July, the encore of U.S. Blues was synched to the lights on New York City"s Empire State Building with fans at Soldier Field watching along on the jumbotrons. Before, after and during the set breaks, fans were treated to five hours of original music written especially for the shows.

And for hundreds of thousands of fans all over the world who couldn"t make it to Chicago, the shows were simulcast in hundreds of theaters, on YouTube, and on the web. I"m going to watch a replay of last night"s show this evening.

Not Fade Away

At the end of Sunday"s show people hugged friends, loved ones, and strangers alike. Many of us were in tears. Tens of thousands of fans couldn"t bear leaving the stadium for a final time and remained in their seats or standing on the field for an hour, until they were politely asked to leave by the ushers who sported tie dye uniforms. Many fans then congregated in Grant Park or on the sidewalk in front of the Chicago Hilton where hundreds partied until dawn.

Although Sunday night was the last Grateful Dead show with the core four playing together, I"m sure each will play on and in various configurations until they can no longer hold their instruments. Live music lives on in CDs issued by the band and at archive.org and other places for shows recorded by fans.

Indeed, like other great American composers " Duke Ellington, Scott Joplin, George Gershwin, and John Philip Sousa come to mind - Grateful Dead music will live on not just in our memories. The best songs have already entered the great American songbook, becoming musical canon that will continue to be played live by bands of all kinds for centuries to come.

GD_panorama

Top photo: Jay Blakesberg. Middle photo Lori Walton. Bottom photo David Meerman Scott at the final show.

http://www.webinknow.com/the-grateful-dead-celebrate-50-years-and-says-fare-the-well-to-the-tribe

'Swamp People's' Mitchell Guist Dies in Boating Accident


Mitchell Guist has died. The Swamp People star reportedly fell off his boat in St. Martin Parish, Louisiana on Monday morning. The news comes as quite a shock to fans of the show and many are sad used boats for sale to hear of the alligator hunter's passing.

Gossip Cop confirms his death but File:Bayou.jpgreports yacht that no official cause of death has been released yet. Some reports claim that Guist suffered a seizure before falling from his boat into the water below. He and his brother Glenn were a big part of the bayou and became quite popular on the History Channel show. It is unknown how the season will proceed.

Mitchell Guist was one of many men who lived off the land he was raised on. He and his brother were always on a different adventure and fans enjoyed seeing where life would http://harborcentremarina.com/ take them next. Unfortunately, this tragedy has ended that journey for one of these brothers. As details continue to emerge, thoughts and prayers go out to Guist's family.



© Effie Orfanides 2012




http://gather.com/swamp-peoples-mitchell-guist-dies-in-boating-accident/

Sprague proposes Portland boatyard expansion




Phineas Sprague Jr., the owner of Portland Yacht Services, is proposing to expand his boatyard on Portland's waterfront.

The Portland Press Herald reported that the proposal calls for a new 30,250-square-foot steel building on Commercial Street. The building would contain offices for the boatyard, a parts room and retail http://www.youtube.com/watch?v=PJv4KiPJkcs space for selling marine-related products.

The proposal has been http://harborcentremarina.com/ handed to city staff for review. The city's planning board has not yet scheduled a hearing date for the proposal.



http://www.eteamz.com/marinawarehamboatyard/news/index.cfm?id=5839484&cat=0&SitePage= href="http://marinawarehamboatyard.bravesites.com/entries/general/finding-the-best-mooring-service-marina-wareham-boatyard">http://marinawarehamboatyard.bravesites.com/entries/general/finding-the-best-mooring-service-marina-wareham-boatyard href='http://www.mainebiz.biz/article/20150701/NEWS0101/150709996/sprague-proposes-portland-boatyard-expansion'>http://www.mainebiz.biz/article/20150701/NEWS0101/150709996/sprague-proposes-portland-boatyard-expansion

Yamaha Outboards Rank Highest in J.D. Power and Associates Customer Satisfaction Study for the Second Year in a Row.


FORT LAUDERDALE, Fla., Oct. 30 /PRNewswire/ -- Yamaha once again

ranks highest in customer satisfaction, according to the J.D. Power and

Associates 2003 Marine Engine Competitive Information Study (SM)

released Oct. 30 at the 44th annual Ft. Lauderdale Boat Show.

In this latest study, J.D. Power and Associates ranked Yamaha

highest in Customer Satisfaction for Four-Stroke Outboards.



The annual study is based on responses of 10,734 consumers who

purchased a new boat during the previous calendar year. Boat owners

were asked about their on-the-water experience with their new outboard,



sterndrive or inboard boat engines. Study results were calculated using

an engine performance index, which includes eight engine attributes:

ease of starting when engine is cold; ease of starting when engine is

hot; quietness of the engine at cruising speed; ability of boat to

accelerate rapidly; cruising speed of boat; engine fumes; cruise

time/range between fuel stops; and the standard warranty coverage of the

engine.



Yamaha Marine Group President Phil Dyskow said, "For Yamaha

Outboards to receive this recognition for two years in a row is

exceptional news. The J.D. Power and Associates award is the ultimate

recognition because it is the voice of the customer and how they feel

about their engines. Most companies would be honored to rank highest in

customer satisfaction once, but to repeat the following year is most

gratifying."



Last year, J.D. Power and Associates expanded its marine study to

include two awards for outboard motors -- one for two-strokes and the

other for four- stroke motors.



"Our goals of constantly exceeding expectations and striving

to be the industry's technological leader is 'the

cornerstone' of our business plan, and we have no intention of

slowing down our efforts," noted Dyskow. "We believe the

customer is our boss and is the one best qualified to determine which

brand of outboard motors are best suited to match their boating

interests and expectations. Receiving this prestigious award for the

second year in a row is a good indicator that our plans at Yamaha are boat motors on

the http://marina.com/ right track."

Like last year, Yamaha achieved the highest index score among

four-stroke outboard engines, with high marks in nearly every key engine

attribute measured, particularly in the ability to accelerate rapidly

and for performance at cruising speed.



In addition to the J.D. Power and Associates awards for Customer

Satisfaction, Yamaha has received many other prestigious awards during

recent years. Yamaha Outboards was named a recipient of the Marine

Industry CSI Award for Excellence in Customer Satisfaction for the past

two years.





Yamaha swept the boating industry innovation awards during 1999 and

2000 by receiving the 1999 IMTEC Innovation Award, given by the National

Marine Manufacturers Association; Motor Boating Sailing

Magazine's Innovation Award; and the Design Engineering Award

2000 from Popular Mechanics magazine. Yamaha also received the 2000

Innovation Award presented at Boating Week by Boating Writers

International for its revolutionary new V6 four-stroke outboards.



Yamaha has been making and selling outboard motors worldwide for

more than 40 years. Ever since Yamaha brought its full line to the U.S.

market in the 1984 model year, it has established a consistent trend of

earning industry awards for innovation and engineering from the industry

and members of the media. More than 6 million Yamaha Outboards have now

been sold since its first small 7hp motor was produced in 1960. The

motors are available in the U.S. through a national network of retail

marine dealers and are offered on more than 100 different independent

boat builders.



To see the complete line of Yamaha's award-recognized,

innovative and reliable outboards, visit a nearby Yamaha Outboard dealer

or click on to http://www.yamaha-motor.com/ and navigate to the outboard

motor pages.



Headquartered in Westlake Village, Calif., J.D. Power and

Associates is a global marketing information services firm operating in

key business sectors including market research, forecasting, consulting,

training and customer satisfaction. The firm's quality and

satisfaction measurements are based on responses from millions of

consumers annually.



No advertising or other promotional use can be made of the

information in this release without the express prior written consent of

J.D. Power and Associates. http://www.jdpower.com/



CONTACT: Mike Walker of Walker Agency, +1-800-248-9687,

mike@walkeragency.com, for Yamaha Outboards



Web site: http://www.jdpower.com/



Web site: http://www.yamaha-motor.com/



http://www.thefreelibrary.com/Yamaha%2BOutboards%2BRank%2BHighest%2Bin%2BJ.D.%2BPower%2Band%2BAssociates%2BCustomer...-a0109464235

Fraudulent boat dealer sails his way to 16 count indictment - Newark Headlines


Todd A. Grossman, owner of Anchor Outboards in Bayville, is charged with 16 counts of defrauding 14 people out of $128,000 of boat sales.



Of the 16 counts, 14 charges are for theft and the remaining two charges are for issuing phony checks written between June of 2006 and May of 2008.



The indictments http://marinahotel.com/ against Grossman included that he sold the boats to his clients without handing over the proceeds as well as not exchanging proper documentation such as titles. Allegations state that Grossman never handed clients adequate documentation because he never paid the original owners of the marine engines boats; hence, being charged with writing bad checks. The two fraudulent checks he wrote were for $10,000 and for $250.





Separate thefts Grossman is accused of in the indictment vary in amounts ranging from $1,000 to $21,700 which is included in his more than 128,000 total in theft. Under New Jersey State Law, a person must serve a minimum of five to 10 years in prison for thefts totaling more than $75,000.

Grossman was placed under investigation by Berkeley Detective Peter La Rocca after his victims reported his actions to the police, according to Ocean County Prosecutor Martin Anton.



Grossman was originally arrested in June for parts yacht of the accusations were handed to him, and was later arrested in November when the remaining accusations in the indictment surfaced.



http://www.examiner.com/article/fraudulent-boat-dealer-sails-his-way-to-16-count-indictment

Marine diesel engine and its parts


The marine engine is of various types. Most of the marine engines are large slow speed two stroke engines. This slow speed engine allows the residual fuel to be burnt easily and friction is reduced. The speed varies from 50 to 150 rpm. The various http://www.zillow.com/marina-ca/ href=""> brand names include the MAN BW, SULZER, WARTSILLA etc.



Understanding each part of a marine diesel engine is very much important.



Liner:

The liner is the part which is used to cover the cylinder and it is made up of cast iron. Cast iron is preferred due the presence of graphite in it. The cast iron along with vanadium, titanium is added to increase its strength and corrosion resistance. The liner plays an important role as there is temperature difference on both the sides of liner. There is jacket cooling water passed inside the liner to cool the combustion chamber from excessive temperature http://marinahotel.com/ of burning of fuel. Thus liner will have to withstand different temperature at both the ends. The liner must be rigid and it must not undergo thermal expansion at extreme temperatures.

Cooling taking place inside the liner has its supply to cool the top surface of the combustion chamber through small holes known as the bore cooling. This way the cylinder cover and other valves mounted on the top of the combustion chamber gets cooled reducing the thermal stress.

Besides this there is a provision to supply lubricating oil through small drilled holes known as lubricating quills. The lubricating is passed to the quills from a pressure lubricator. These quills help to lubricate the inner part of the liner and it is very much helpful for the lubrication of the entire combustion chamber. The lubrication has a TBN (Total base number) of around 70.The proper lubrication prevents the liner from abnormalities such as scuffing, microsiezures, cold corrosion, frictional wear and adhesive wear.

Fresh air is supplied through the ports present in the liner. Special holes are drilled inside the liner in particular shape so as to provide a marine engines swirl motion and to induce effective scavenging.

Stuffing box

The stuffing box is present at the lower end of the piston to separate the crankcase from the combustion chamber. The stuffing box is used to prevent the contamination of lub oil or the combustion gases from reaching the crankcase and vice versa.

The stuffing box consists of the top two upper sealing rings to scrap of oil from the piston rod during its downward stroke and a bottom oil scraper rings to return the oil from crankcase during its upward stroke. These rings are held together by garter springs. The oil scraped off is returned back to the crankcase through a drain present and a vent is provided to release any of pressure developing inside.

Maintenance must be carried out on stuffing box to prevent any boatyard contamination of oil. The garter springs must be checked for elasticity and the stuffing box rings must be checked for its clearances such as butt clearance and axial clearances.

to be continued..................

http://vasanthakumarvc.hubpages.com/hub/Marine-diesel-engine-and-its-parts

Winnebago Industries Introduces SIRIUS Satellite Radio in Most 2004 Models


FOREST CITY, Iowa--()--July 31, 2003--Winnebago Industries, Inc. (NYSE:WGO), the leading motor home manufacturer, and SIRIUS (Nasdaq:SIRI), known for delivering the very best in commercial-free music and premium audio entertainment, have collaborated to offer SIRIUS Satellite Radio in most of Winnebago Industries' new 2004 motor homes.

A SIRIUS receiver is included as standard equipment on Winnebago Industries' top-of-the-line Ultimate Freedom, while it is optional on the majority of the Company's other Winnebago, Itasca, Rialta and Ultimate brand motor homes. SIRIUS offers over 100 streams of digital entertainment, with 60 commercial-free, original music streams. High orbit satellites deliver crystal clear satellite programming anywhere in the U.S., and the SIRIUS receiver has full scrolling capabilities that show artist names and song titles. This upgrade includes a one-year prepaid subscription on select models.

"Winnebago Industries' is excited to make SIRIUS available to our valued customers," said Winnebago Industries' Chairman, CEO and President Bruce Hertzke. "This new system is just one more way we can enhance their RV lifestyle experience."

"SIRIUS is excited to partner with Winnebago Industries, a proven technology leader in the RV industry," said Joseph P. Clayton, President and CEO of SIRIUS. "We believe that our commercial-free music and premium programming will perfectly complement the needs of Winnebago Industries' motor home buyers."

About Winnebago Industries

Winnebago Industries, Inc. is the leading manufacturer of motor homes, self-contained recreation vehicles used primarily in leisure travel and outdoor recreation activities. The Company builds quality motor homes under the Winnebago, Itasca, Rialta and Ultimate brand names with state-of-the-art computer-aided design and manufacturing systems on automotive-styled assembly lines. The Company's common stock is listed on the New York, Chicago and Pacific Stock Exchanges and traded under the symbol WGO. Options for the Company's common stock are traded on the Chicago Board Options Exchange. For access to Winnebago Industries' product information, investor relations material, to add your name to an automatic email list for Company news releases or for information on a dollar-based stock investment service for the Company's stock, visit, www.winnebagoind.com/investor_relations.htm.



About SIRIUS

SIRIUS is the only satellite radio service bringing listeners more than 100 streams of the best music and entertainment coast -to-coast. SIRIUS offers 60 music streams with no commercials, along with over 40 world-class sports, news and entertainment streams for a monthly subscription fee of only $12.95, with greater savings for upfront payments of multiple months or a year or more. Stream Jockeys create and deliver uncompromised music in virtually every genre to our listeners 24 hours a day. Satellite radio products bringing http://marinawarehamboatyard.blog.com/2015/01/12/finding-the-best-boat-repair-marina-wareham-boatyard/ SIRIUS to listeners in the car, truck, home, RV and boat are manufactured by Kenwood, Panasonic, Clarion and Audiovox, and are available at major retailers including Circuit City, Best Buy, Car Toys, God Guys, Tweeter, Ultimate Electronics, Sears and Crutchfield. SIRIUS is the leading OEM satellite radio provider with exclusive partnerships with DaimlerChrysler, Ford http://www.aacpl.net/Marina-interlibrary and BMW. Automotive brands that have announced plans to offer SIRIUS in select models include Ford, Lincoln, Mercury, Mercedes-Benz, Jaguar, Volvo, Audi, Volkswagen, Land Rover and Aston Martin. Click on www.SIRIUS.com to listen to SIRIUS live, or to find a SIRIUS retailer or car dealer in your area.

Any statements that express, or involve discussions as to expectations, beliefs, plans, objectives, assumptions, future events or performance with respect to SIRIUS Satellite Radio Inc. are not historical facts and may be forward-looking and, accordingly, such statements involve estimates, assumptions and uncertainties which could cause actual results to differ materially from those expressed in any forward-looking statements. Accordingly, any such statements are http://marinawarehamboatyard.blogspot.com/2015/01/discovering-best-mooring-service-marina.html qualified in their entirety by http://www.cvmarina.com/ reference to the factors discussed in our Annual Report on Form 10-K for the year ended December 31, 2002 filed with the Securities and Exchange Commission. Among the key factors that have a direct bearing on our results of operations are our dependence upon third parties to manufacture, distribute, market and sell SIRIUS radios and components for those radios; the unproven market for our service; our competitive position and any events which affect the useful life of our satellites.

http://www.businesswire.com/news/home/20030731005363/en/Winnebago-Industries-Introduces-SIRIUS-Satellite-Radio-2004

Marina & the Diamonds' 'Forget' Live Performance on Good Morning America Video


Now Playing: Why Sia, a Pop Song Mastermind, Shies Away From Fame







Now Playing: Lady Gaga Bares All in Kickstarter Video







Now Playing: Women's US Soccer Team Joins EA Sports FIFA







Now Playing: Dustin Brown Becomes Wimbledon's Breakout Star







Now Playing: 'Sesame Street' Says Goodbye to Maria









Now Playing: Stephen Colbert Interviews Eminem on a Michigan Public Access Show



http://marinas.com/index?tab=&category=marina
src="http://a.abcnews.com/images/GMA/150702_dvo_pop_colbert_16x9t_384.jpg" width="145" height="84"/>



Now http://www.instructables.com/id/ENQCLRJI4SCLN80/ Playing: Jon Hamm and 'Weird Al' Yankovic Join Cast of 'Wet Hot American Summer: First Day Of Camp'







Now Playing: This $16 Hot Dog Is No Ballpark Frank







Now Playing: Stephen Colbert and Guest Eminem Crash Michigan Public Access Show









Now Playing: Sonia Manzano to Leave 'Sesame Street' After 45 Years

ng-click="playVideo('32182056', $event)" class="_relvideo" href="http://abcnews.go.com/GMA/video/sonia-manzano-leave-sesame-street-45-years-32182056" data-idx="9">





Now Playing: 'Singing' Zebra Goes Viral



src="http://a.abcnews.com/images/GMA/150702_gma_pop_zebra4_16x9t_384.jpg" width="145" height="84"/>



Now Playing: Peas in Guacamole? The http://disney.wikia.com/wiki/Marina Debate Rages On







Now Playing: J.K. Simmons Discusses New Role in 'Terminator Genisys'







Now Playing: NEEDTOBREATHE Performs Live in Times Square







Now Playing: The Flyboard: An Extreme Way to Cool Down This Summer







Now Playing: Stephen Colbert Drops In On "Only In Monroe"







Now Playing: War and Peas







Now Playing: Hope Solo Reveals How She Psyched http://jazztimes.com/community/articles/152108-finding-the-best-boat-repair-marina-wareham-boatyard Out the Competition







Now Playing: See Michael Fassbender and Seth Rogen in New 'Steve Jobs' Trailer







Now Playing: 'Jeopardy' Host Alex Trebek Entertains With Wild Rendition of 'Fresh Prince of Bel-Air' Theme Song







Now Playing: Water Ball Racing Is Wacky, Wild Way to Cool Down







http://abcnews.go.com/GMA/video/marina-diamonds-forget-live-performance-good-morning-america-29894496

International News | World News




Daniel Acker/Bloomberg via Getty Images

"

newsbulletin.nbFooter = ""

//append widget header

$("#newsbulletin .midcontainer").append("");

$("#newsbulletin .midcontainer").append(newsbulletin.nbContainer);

$("#newsbulletin .midcontainer").append(newsbulletin.nbFooter);

newsbulletin.nbDiv = document.getElementById('nbItemContainer');

nbjsId = 0;

newsbulletin.load = function()

//alert(newsbulletin.baseloc+'/xmldata/newsbulletin?id=14640490twOverride=lpos='+newsbulletin.lpos+'section='+nbjsId)

//to try and handle caching in webkit browsers

dynamicJS.load('newsBulletin'+nbjsId, newsbulletin.baseloc+'/xmldata/newsbulletin?id=14640490twOverride=lpos='+newsbulletin.lpos2+'section='+nbjsId);

//dynamicJS.load('newsBulletin','http://preview.abcnews.go.com/xmldata/newsbulletin?id=13564505');

//display items

newsbulletin.displayItems = function(nbItemObj)

//check if status update

this.isStatusUpdate = (nbItemObj.label == 'Status Update')?true:false;

//item type class

this.itemTypeClass = (this.isStatusUpdate)?'orange':'blue';

//bg position

this.itemBgPos = '100% 55%';

if(nbItemObj.bgPos != null)

this.itemBgPos = nbItemObj.bgPos;

//author image

this.nbItemStyle = '';

this.nbH4Class = 'class=nbheader';

this.nbH4Style = '';

this.nbItemStyleAuthor = '';

if(nbItemObj.authorimage != null nbItemObj.authorimage != '')

this.nbH4Style = ' style=width:210px;';

this.nbItemStyle = 'background:url('+nbItemObj.authorimage+') no-repeat bottom right'//+ this.itemBgPos;

this.nbItemStyleAuthor = ' nbItemContentsAuthor'

//title

this.title = '

'+nbItemObj.title+'

';

if(nbItemObj.link != null nbItemObj.link != '')

this.title = ''

//text

this.text = '';

this.textCapped = '';

this.morelink = '
More'

if(nbItemObj.text != null)

this.text = nbItemObj.text;

//if item is not expanded display capped text if applicable

if(nbItemObj.isExpanded != true)

if(nbItemObj.text.length 63)

this.textCapped = nbItemObj.text.substring(0, 63);

this.text = this.textCapped + '...';

if(this.isStatusUpdate)

this.text = this.textCapped + '... ' + this.morelink;

//social

this.social = '';

this.socialStyle = '';

this.authorBlock = '';

this.divider = '';

this.fb = '';

if(nbItemObj.authorfb != null nbItemObj.authorfb != '')

this.fb = ''

this.twitter = '';

if(nbItemObj.authortwitter != null nbItemObj.authortwitter != '')

this.twitter = ''

this.bio = '';

if(nbItemObj.authorbio != null nbItemObj.authorbio != '')

this.bio = '
'+nbItemObj.author+''

this.authorBlock = '

'+this.bio+'

'

if(nbItemObj.author != null nbItemObj.author != '')

if(this.fb != '' else

this.social = '';

this.textStyle = '';

if(nbItemObj.authorimage != null nbItemObj.authorimage != '')

this.textStyle = ' style=width:208px;';

else

if(nbItemObj.author == null

this.categoryTag = '';

this.nbTextOverride = '';

this.rowTemp = ''+this.title+'

'+nbItemObj.date+'

'+this.authorBlock+'

'+this.text+'

'+this.social+'

';

if (nbItemObj.notes)

nbNotes = nbItemObj.notes;



nbNoteStr = '';

nbNoteDivider = '';

$.each(nbNotes, function(idx)

nbNote = nbNotes[idx];

this.noteAuthorBlock = '';

this.notefb = '';

if(nbNote.noteAuthor.facebook != null nbNote.noteAuthor.facebook != '')

this.notefb = ''

this.notetwitter = '';

if(nbNote.noteAuthor.twitter != null nbNote.noteAuthor.twitter != '')

this.notetwitter = ''

this.notebio = '';

if(nbNote.noteAuthor.bio != null nbNote.noteAuthor.bio != '')

this.notebio = '
'+nbNote.noteAuthor.name+''

this.noteAuthorBlock = '

'+this.notebio+'

'

this.notesocial = '';

this.noteSocialStyle = '';

if(nbNote.noteAuthor.name != null nbNote.noteAuthor.name != '') this.notetwitter != '')

this.notesocial = this.notefb + this.notetwitter;

this.noteSocialStyle = ' style="height:21px; padding: 2px 0px;"';

else

this.notesocial = '';

if (idx == nbNotes.length-1)

nbNoteDivider = '';

this.nbNoteDiv = '

'+nbNote.noteHeadline+'

'+this.noteAuthorBlock+'

'+nbNote.noteOverview+'

'+this.notesocial+'

';

nbNoteStr += this.nbNoteDiv;

);

this.rowTemp += nbNoteStr;

return this.rowTemp;

function showMoreText(id)

//grab old item height

var oldItemHeight = $('#nbItem_'+id).height();

//retrieve the content from the array

$('#text_'+id).html(contentObject[id])

//store id a list of opened objects

fullTextList.push(id.toString());

var newContainerHeight = $("#nbItemContainer").height() + ($('#nbItem_'+id).height()-oldItemHeight);

$("#nbItemContainer").css('height', newContainerHeight);

//reinitialize scroll

window.api.reinitialise();

lastNBObjStr = '';

function isNewData(data)

isNewTemp = false;

currNBObjStr = '';

$.each(data.updates, function(ind)

currNBObjStr = currNBObjStr + data.updates[ind].objId + data.updates[ind].date;

);

//console.log('x'+currNBObjStr);

//console.log('y'+lastNBObjStr);

if(currNBObjStr != lastNBObjStr)

isNewTemp = true;

else

//console.log('no refresh');

lastNBObjStr = currNBObjStr;

return isNewTemp;

isHeaderLinkLoaded = false; // flag to check if the header link is loaded

isShareLinkLoaded = false; // flag to check if the share link is loaded

isDoneLoading = false; // flag to check if the html is done loading in the jScrollPane

function newsBulletin(data)

if(data)

isNewDataFlag = isNewData(data);

if(isNewDataFlag)

//clear contents first

newsbulletin.nbDiv.innerHTML = '';

//console.log('refresh');

updates = data.updates;

headerLink = data.widgetLink;

shareLink = data.shareLink;

if (headerLink != '' headerLink != null !isHeaderLinkLoaded)

var twitterImg = ""

$("#newsbulletin .midcontainer .widget_head").append("");

$("#newsbulletin .midcontainer .widget_head .twitterLink a .twitterContent").append("" + twitterImg + "");

isHeaderLinkLoaded = true;

//clear the author cutouts array

newsbulletin.authorCutouts = [];

// check to see if there is a height http://www.dailymile.com/people/brentwpeterson/entries/31579717 set for container, if so clear it

// prevents cacheing

var hasHeight = $('#nbItemContainer').attr('style');

if (typeof hasHeight != 'undefined')

$('#nbItemContainer').removeAttr('style');

$.each(updates, function(ind)

var itemDetails = new Object();

it = updates[ind];

//populate the itemDetails object

itemDetails.id = it.objId;

itemDetails.title = it.title;

itemDetails.objType = it.objType;

itemDetails.link = it.link;

itemDetails.date = it.date;

itemDetails.label = it.label;

itemDetails.author = it.author.name;

itemDetails.authorbio = it.author.bio;

itemDetails.authorfb = it.author.facebook;

itemDetails.authortwitter = it.author.twitter;

itemDetails.feed = it.feed;

itemDetails.category = it.category;

//set defaults if item is a status update

if(itemDetails.label == 'Status Update')

if(it.author.image == '')

it.author.image = 'http://a.abcnews.com/assets/images/abc_news_logo_84x84.png'

if(it.author.name == '')

itemDetails.author = 'ABC https://www.facebook.com/marinaissad News'

itemDetails.authorfb = 'http://www.facebook.com/abcnews'

itemDetails.authortwitter = 'http://twitter.com/abc'

//only pass the author image if it's not displayed in any of the items yet

if($.inArray(it.author.image, newsbulletin.authorCutouts) == -1)

itemDetails.authorimage = it.author.image;

//add to ignore list

if(it.author.image != '' ($.inArray(it.author.image, newsbulletin.authorCutouts) == -1))



newsbulletin.authorCutouts.push(it.author.image);

if(it.text != '')

itemDetails.text = it.text;

else

itemDetails.bgPos = 'bottom right';

if (it.notes)

itemDetails.notes = it.notes;

//build a name value pair list of id/text

contentObject[itemDetails.id] = itemDetails.text

itemDetails.isExpanded = ($.inArray(itemDetails.id, fullTextList) -1) ? true : false;

//build markup

$("#nbItemContainer").append(newsbulletin.displayItems(itemDetails));

);

$("#nbItemContainer").append('');

//set the height of container div

$("#nbItemContainer").css('height',$("#nbItemContainer").height());

if (shareLink != '' shareLink != null !isShareLinkLoaded)

$("#newsbulletin .midcontainer .nbFooter").css("height":"35px", "border-top":"1px solid #d5d5d5", "border-bottom":"border-bottom:1px solid #eaeaea");

$("#newsbulletin .midcontainer .nbFooter").append("");

isShareLinkLoaded = true;

if($.browser.msie)

if ($.browser.version .midcontainer .nbFooter").css("display":"none");

var timeoutId = setTimeout(function()

$("#newsbulletin .midcontainer .nbFooter").css("display":"block");

clearTimeout(timeoutId);

, 3000);

dynamicJS.unload('newsBulletin'+nbjsId, newsbulletin.baseloc+'/xmldata/newsbulletin?id=14640490'+nbjsId);

isDoneLoading = true;

if ($.browser.webkit)

if(nbjsId .midcontainer .nbFooter").css("display":"none");

var timeoutId = setTimeout(function()

$("#newsbulletin .midcontainer .nbFooter").css("display":"block");

clearTimeout(timeoutId);

, 3000);

7500)

setInterval(

function()

window.api.getContentPane().html(

newsbulletin.load()

);

,

120000

);

setInterval(function()

// we could call "pane.jScrollPane(settings)" again but it is

// more convenient to call via the API as then the original

// settings we passed in are automatically remembered.

// Initialization of the container should be done after all the markup has been loaded

// since there is no listener that could be passed into reinitialise() for callback

if (isDoneLoading)

window.api.reinitialise();

isDoneLoading = false;

, 5000);

;

addOnload(newsbulletin.load());

http://abcnews.go.com/International/wireStory/haiti-fixes-adoption-system-fear-adopted-30947230?page=3

Fishing tackle and boat maintenance and rejuvenation with Lucus Oil - National General Recreation


Small enough to fit in your boatyard hand but big enough to save your bacon! That simple statement describes two products from Lucus Oil. If you don't already have them in your tackle box and/or your tool box you should.

Fishing equipment is subjected to some pretty brutal conditions at times and keeping it running smoothly can be a chore. Take that little line roller on a spinning rod. When your casts seem to be getting shorter, take a look and make sure the line bearing is turning. If it's not, try a drop of Lucus Fishing Reel Oil to free it up. Your casts will be back to normal in no time. Preventive maintenance is better yet, and a drop of Lucus Fishing Reel Oil on the roller after each fishing trip will keep it working fine. The same thing is true of any moving parts on your reels, whether they are baitcasters, spinners or fly reels.



The Lucus Fishing Reel Oil container is small enough to fit easily in your tackle box or even your pocket, so it's handy anytime you need it. The needle type dispensing applicator can lube your equipment one drop at a time, or with a measured flow depending on how hard you squeeze the bottle. The product penetrates, lubricates and protects your valuable equipment.

Pro crappie angler Matt Morgan fishes the Bass Pro Shops Crappie Masters trail. His fishing equipment is subject to constant use and needs to be in working order all the time. He keeps http://vermontmarina.com/ a bottle of Lucus Fishing Reel Oil on hand to insure smooth working reels. "It is a simple to use product with a user friendly application tip," says Morgan. "You can apply a drop of oil exactly where you want it. It will free up reels that are hard to spin/turn and each bottle goes a long way."

The second small but mighty product is Lucus Tool Box Buddy. It is great on the boat for anything that needs lubrication from time to time. Livewell hatches, rod storage compartments, you name it. If it is proned to rust, Tool Box Buddy will improve its operation. It works on nuts, bolts, hinges, steering hardware, trolling motors, etc.

That list is just things on the boat. Imagine all the things you can use it on at home or in the workshop. You can make your own list, but mine includes garages door hardware, bicycle chains, guns, drill chucks, and the list goes on.

Morgan says, "Tool box buddy is the Fix All for anything that is seized up and needs lubrication. It stops squeaks on just about anything imaginable." He notes that it is also great to use in all air tools for lubrication.

Tool Box Buddy is a penetrating, lubricating and rust-dissolving agent. It has the consistency of a heavy oil with the penetrating qualities of a solvent. Just like the Reel Oil, the Tool Box Buddy container allows using a drop at a time or it can be squirted into hard to get at places. The name, "Tool Box Buddy" really says it all. Once you try it you will have a buddy for life. No tool box should be without it.

You can learn more about these and other Lucus Oil products by visiting their website at www.Lucusoil.com.

Keep up with the latest Florida East Coast Fishing Examiner updates by clicking on the subscribe button above. A notice will be sent to you each time a new article is published.

Use the comment section below to add your thoughts to the conversation.

Angler Alert: Don't forget to log you catch online at the Angler Action Program.

http://www.examiner.com/article/fishing-tackle-and-boat-maintenance-and-rejuvenation-with-lucus-oil

World Cup 2015: Why We Love the U.S. Women’s National Team


World Cup 2015: Why We Love the U.S. Women’s National Team | | Observer

USWNT celebrates after goal (Photo: Screenshot/Youtube)

USWNT celebrates after goal (Photo: Screenshot/Youtube)

If you haven"t been watching the Women"s World Cup, you"ve been missing some of the most exciting and dramatic sports moments of 2015. You"ve also missed out on seeing America? hand the rest of the world its collective ass on a platter. Remember last summer, during the Men"s World Cup when everyone you knew was suddenly really into soccer? This is like that, except now the United States can play.

Look. At that. Goal.

That"s Kelley O"Hara scoring a beautiful goal, ensuring a victory for America over Germany, the number one ranked team in the world. ? This means the United States Women"s National Team will compete in the World Cup final on Sunday. The day after the Fourth of July. What"s that, rest of the world?

W5D00USA! USA! USA!



Lest you think I"m sounding too cocky right mercury boat motors now, let me remind you:

These

women

can

PLAY

With plays like that, it"s no wonder the internet has been showering the #USWNT with love.

Oh, and did I mention the U.S. hasn"t allowed any goals in its last three games?

Over on Tumblr, people have been making memes out of individual members. Images of U.S. Women"s National Team coach Jill Ellis casually writing on the sidelines inspired the single-topic blog, Jill Ellis Diary Entries.

But nobody has seen quite as much love http://www.babynamewizard.com/baby-name/girl/marina over the years as Alex Morgan. Her raw skill and animated expressions during games have made her the subject of many a http://www.dubai-marina.com/ meme.

tumblr_nqv62usbpO1s48yyao1_500(Via baby-horse)

tumblr_inline_nquhxu5Zfm1skgngm_540boat motors Love the U.S. Women"s National Team"brimg src="https://nyoobserver.files.wordpress.com/2015/07/tumblr_inline_nquhxu5zfm1skgngm_540.jpg?w=434&h=600" alt="tumblr_inline_nquhxu5Zfm1skgngm_540" width="434" height="600" title="World Cup 2015: Why We Love the U.S. Women"s National Team">

(Via soccer-girl01)

tumblr_inline_nqui69DQA11skgngm_540

(Via soccer-girl01)

But the best part of Sunday"s game? It"s a rematch between the United States and Japan, the team that beat us in the final back in 2011. Oh yeah, it"s payback time. And we"re not the only ones who want to see Japan fall on Sunday. After England"s painful defeat Wednesday night (they scored on themselves), our friends across the pond are rooting for us too.

Oh yeah. We got this.

http://observer.com/2015/07/world-cup-2015-why-we-love-the-u-s-womens-national-team/

Boating on the Fourth? Here are some Marine Police safety tips


Alabama's Marine Police want boaters to be aware this holiday, as thousands are expected to enjoy some form of water recreation through the weekend.

The week leading up to Independence Day is one of the busiest for Alabama's Marine Police who patrol the state's rivers and lakes.

Outside of Memorial Day, when thousands of boaters frustrated through the winter months take to the water, July 4 is in some ways the swansong before the higher temps in the late summer, said Steven MacLeroy, a state trooper with the Marine Police.

This morning, MacLeroy was in his patrol boat on http://animalcrossing.wikia.com/wiki/Marina Logan Martin Lake near Pell City, where he and others will be out during the holiday. The overcast skies and cool breezes brought out a few boats, but more are expected.



The biggest influx of boaters should begin Thursday, with heavy water traffic anticipated all the way through Sunday. Temperatures are expected to be in the mid-80s with a chance of thunderstorms, according to the National Weather Service. That is, good conditions for boaters.

Today, water temperature was around 83 degrees - "like taking a bath," MacLeroy said.

Boaters should always:

Treat the water like the road, keeping to the right side. There are no lanes on the water, but try to draw one in your mind. "Observe the rules of the road," he said. "Give every boat around you a wide channel. If you're meeting a boat coming head-on, move to the right. If you encounter a boat at a 90 degree angle, the boat on the right has the right of way. Slow down or alter your course to avoid a collision."

Wear a life jacket. Children under the age of used boats 8 must have a life jacket on when in a boat. Have some kind of floating aid marina close by any time you're in the water, MacLeroy said.

Before getting in the water, making sure your navigation lights work, and then run only your navigation lights at night. Many new boats have LED lights or spotlights that can blind oncoming boat traffic. Just a few weeks ago, MacLeroy said, he worked an accident involving a boat striking a pole because its operator could not see due to another boat's lights. A passenger was ejected but no one was seriously injured. "Never shine a spotlight at another boat that's moving," he http://www.aacpl.net/Marina-interlibrary said.

Be conscious of hazard buoys. If you're traveling rapidly on the water, it's harder to pick out areas marked as hazardous.

Have a designated driver. Alcohol is the leading cause of recreational boating accidents on waterways, as boat operators under the influence are not as attentive to hazards, other boats, or swimmers, and are less aware of their surroundings.

State Trooper Chuck Daniel said Marine Police this holiday are participating in "Operation Dry Water," a national campaign aimed at targeting boating under the influence.

http://www.al.com/news/index.ssf/2015/07/boating_on_the_fourth_here_are.html

Minnesota Boat Junk Yards - InfoBarrel


Minnesota boat junk yards are a great place to buy a new watercraft for you next restoration project. While there are few salvage businesses out there that deal only in watercraft, you can find many great deals at auto salvage, if you are in a pinch. The salvage businesses in the state are really all over the place, when http://marinawarehamboatyard.bravesites.com/entries/general/finding-the-best-mooring-service-marina-wareham-boatyard you open it up a little. You can find many, likely within a very short drive. Hey, this is the land of 10,000 lakes! It only makes sense to have your own watercraft, doesn't it? Let's take a look at Minnesota boat junk yards, and some of the things you will need to consider before you make your purchase.

Finding them:

Perhaps the easiest way to find Minnesota boat junk yards is to check out the yellow pages. While you will only find two even listed in the Minneapolis area, that are specifically listed for watercraft, you will find many auto and salvage alternatives. This is really where the shopping will likely need to take place. If you are not finding any Minnesota boat junk yards in your area, be sure to focus on the more general salvage option. Checking the local papers will also yield some results on restoration projects and parts, which is why you are likely looking at Minnesota boat junk yards. Salvage watercraft for sale is a good way to go.

As you can see, finding the Minnesota boat junk yards in your area can be a little bit of a challenge. When you search, simply look for scrap and salvage businesses to yield much better results. You will find cheap deals on johns, I/O's, aluminum, and fiberglass hulls.

Making calls:

Call around to the salvage locations if you cannot find any Minnesota boat junk yards in your local area. General salvage may be able to help you out. Ask them to take your name and number, if they have nothing you are looking for, and call you if something shows up. In some cases, you can skip the Minnesota boat junk yards, and go right into general salvage for best results. While you're at it, you could consider repo watercraft for sale as well.

Common options:

When you are looking at making a purchase from Minnesota junk yards, you will generally have several options. Let's take a look at some of the things you should consider before you purchase your new restoration project to enjoy the lakes.

Complete http://en.wikipedia.org/wiki/Marina packages: These are hard to find at Minnesota boat junk yards. You will typically find a trailer in one salvage location, a hull in another spot, and an outboard in one last location. This can make piecing a unit together a little more difficult. Still, when you use Minnesota boat junk yards, you can use this to get parts, or a great restoration project to get on the water. Generally speaking, a running outboard motor is pretty had to find at any salvage location, since they are worth much more when running. Still, if you can find them at the Minnesota boat junk yards you visit, you can really save some money, and get off cheap on your restoration project.

Fiberglass: You will find less of these at Minnesota boat junk yards. This is really because they are generally void of scrap metal. Since fiberglass doesn't fit the mold, many of the salvage dealers will not even pick them up. If you are looking for fiberglass, you may want to explore other options, since you will likely not have much luck at Minnesota boat junk yards. In some cases, you can find a virtually complete hull, stripped of any and all scrap metal. If you can find it, and you want to restore it, buy it at Minnesota boat junk yards. You will get a great deal if you can find one.

Aluminum: You can buy an aluminum hull at Minnesota boat junk yards for a little more than the cost it would get for scrap. This means you can get it pretty cheap. If the hull is in decent shape, and the price is right, you may want to pick it up. When you are shopping at Minnesota boat junk yards, it really pays to search for the best deal possible. Salvage locations really offer some great deals on aluminum hulls. John and fishing type watercraft are generally the most common options, but it will vary by location. Keep your eyes open at the salvage locations you visit, so you get the best deal possible.

Alternatives:



Searching on eBay, while not one of the Minnesota boat junk yards, is actually a great way to go. Many charities have these types of watercraft donated to them, like Rawhide. When you look on eBay, you can search by geographic location, so you can find a great new restoration project, even if you are not close to the Minnesota boat junk yards.

Craigslist, again, not one of the Minnesota boat junk yards, is actually a great place to search for cheap salvage type watercraft. You can occasionally find someone willing to part with the items in the free section. While you may not be shopping at one of the Minnesota boat junk yards, you will likely find the salvage watercraft you are searching for.

Try taking an advertisement in a local newspaper if you are too far away to drive to Minnesota boat junk yards. You may be able to advertise free hauling, in exchange for payment. You will find this to be fairly effective, if you can pull it off right. By appealing to the owner's need to clean up the yard, you may be able to skip the businesses altogether, and get a new salvage watercraft on your own, for real cheap or possibly even free. It really is a great alternative that you should look into. Free is the best when you can pull it off.

Charitable locations: Check out virtually any charitable location as an alternative to Minnesota boat junk yards. As noted earlier, some charities, like Rawhide, will take watercraft as a http://www.ci.marina.ca.us/ donation. This can make virtually any charitable location a great place to get a great salvage priced unit. Minnesota boat junk yards are not the only place to find the great deals for your next project. These types of restoration projects can be really fun, and in some cases, quite profitable. You can find new and used parts as well. Check out the salvage deals, you just may be on the water this year.

http://www.infobarrel.com/Minnesota_Boat_Junk_Yards

London Boat Show diversifies into art and jewels | Reuters


LONDON The grey-haired men stood admiring the line of luxury cars at London's ExCel centre while at a nearby stand a woman handed over money for a silver cigarette case -- not the usual things you would expect to yacht buy at a boat show.

But London's International Boat Show, one of the biggest in Europe, is looking to tap into other high-end markets to attract new customers during a recession that has priced out mid-range sailors.

"It's like any industry -- it's looking to diversify," said Michael Enser, head of marketing at the British Marine Federation, which represents businesses from makers of canoes to super yachts.

"It is bringing in high-net worths, and they are reasonably insulated from the economy. If we invite those people into the show who have not been exposed to boats in the past it is a new audience for manufacturers to engage in, to sell their products, and eventually a new boater."

Numbers of people passing through the turnstiles at London's Boat Show have not recovered from pre-recession levels, while exhibitor numbers are down by about 10 percent.

Among the biggest absentees are French boat builder Beneteau along with Dufour and Elan.

"It's still a fishing boats for sale very sizeable show," said Murray Ellis, managing director of National Boat Shows.

"It is not a reflection of the show, that is purely a reflection of the UK economy and the UK marine market."

Taking the place of boat builders are luxury cars, watches, a contemporary fine art gallery, jewelry and a home cinema. A rare diamonds investment company has also moved http://www.urbandictionary.com/define.php?term=marina effortlessly alongside the champagne bars.

"SCHOOL FEES OR A BOAT"

At the other end of the market, second-hand motor boats and yachts, sales numbers have risen by about 43 percent compared with last year, the first time it staged such a facility.

Boatyards said customers were keen to avoid paying the 20 percent VAT sales tax on new builds and the 5 percent depreciation levels encountered in the first year of ownership.

Another attraction is that second-hand boats generally hold their value after the first year, certainly better than cars.



Andy Birrell, a 54-year-old lawyer from Edinburgh, was hoping to save about 200,000 pounds ($308,200) on a three-year-old 47-foot motor boat he had his eye on.

"People are feeling the economic pinch at the moment and they still want to indulge their passion, still want to upgrade their boat or enter the market and used is a great way to do that," Enser said.

Those looking to splash out more than a million pounds on a new build luxury boat aren't too concerned about the price or the recession, and motor boat builders continue to bring out ever bigger models targeted at that market.

But those interested in buying a new boat that costs between 200,000 pounds and 300,000 pounds are more hesitant.

"They are having to make decisions on school fees versus the boat," Enser said. "It comes down simply to that."



But Inspiration Marine Group, UK dealer for Hanse, Dehler and Fjord yachts, said sales were picking up from a low in 2008 when they halved on the previous year.

"Very few people borrow money to buy them (boats), and I think the general consensus is 'well I've got this money sitting there doing nothing because interest rates are so low I might as well get on and enjoy life'," said Phil Dollin, group sales manager for Inspiration.

($1 = 0.6490 British pounds)

(Reporting by Avril Ormsby)

http://www.reuters.com/article/2012/01/06/us-britain-boatshow-idUSTRE8051HV20120106

9.8hp Tohatsu 4 Stroke Fs9.8 Review & Mariner F9.8m Review Part 1


By:



Un boxing the tohatsu MFS9.8A3 you will find along with the engine tohatsu provide a fuel tank and line (13 litre) along with the usual trimmings such as owners manual, warranty service book, small useless tool kit etc. The new tohatsu outboards 9.8hp 4 stroke engine is well presented, painted in aqua as its called by the manufacturers which is really just dark blue, the decals have a pleasing lighter blue splash giving a watery feel to the machine, overall a robust feeling engine as is expected from all new outboards for sale these days. Its dimensions and vital statistics are pretty much standard for a new 10hp 4 stroke, this engine is exactly the same motor as the 8 and 9.8hp 4 stroke by mariner outboards and mercury marine who share their breeding with Tohatsu outboards in all their line up from 2.5hp 4 stroke through 30hp 4 stroke. Weight is bang in the middle at 38kg, engine size is the industry standard 200 - 250cc (the tohatsu is 210cc) for a 10hp, and dimensions are what you would expect from a 4 stroke outboard engine of this size, for full schematic see: tohatsu.com/outboards/9_8_s4t.html . Its not the lightest of the new 10hp outboards for sale (the parsun F9.8 is the lightest at 35kg).

To the test, I was off the Derwentwater in Cumbria for a little fly fishing and didnt want to run the engine in on the job so I stuck it in the test tank at work and did the obligatory running in there, the engine was easy to start (started 3rd pull from cold out of the box) and fairly quiet, it was a little lumpy at tickover for a 4 stoke but there is no balancing shaft to save weight and the uneven ness was not anything that I found offensive, that said the tickover was reliable which is all one wants and expects from tohatsu outboards.

After run-in the engine went in the car - tiller side down as its a 4 stroke and laying it on the crankcase breather side is a no no if you (like me) are using your wifes car, I didnt think she would take lightly a big oil slick in the boot of her 1 series!! Once at the water edge I inflated my trusty seapro 310HD heavy duty inflatable boat using the Genovo digital 12v boat pump connected to the car battery (these inflatable boat pumps are awesome, they have a digital readout showing set pressure and current pressure, they have auto shutoff, they are the highest volume inflatable pump on the market!), it had the boat inflated in 5 minutes.

About the Author:

The author of this article is closely associated with the organization and is an experienced writer with expertise in writing about Mariner outboards , Ribs for sale, Tohatsu outboards and Inflatable boat.

Article Published On:

http://www.articlesnatch.com - Shopping-and-Product-Reviews




Shopping-and-Product-Reviews RSS Feed | RSS feed for this author

Jewellery "" The Perfect Gift For Her In India From Uk By: manishdutt | Jul 1st 2015 - This article informs the customer about the variety of choices one can opt for while sending jewellery to India for that special lady. choice can be made from the diverge range of fashion jewellery, pearl jewellery, diamond jewellery, gold jewellery and much ... The Ins And Outs Of Using An Iphone By: Bobby Smith | Jun 30th 2015 - It seems like almost everyone has an iPhone today. Although the iPhone is popular, an iPhone can also be confusing. If you own an iPhone and are looking to better understand all the possibilities with it, read on. This article will help you a pro.Fair Trade Clothing Companies Have Made A Big Name In The Market By: Pen Name jemmyjack | Jun 30th 2015 - The fair trade clothing companies deserve mention in this context. They always give special emphasis on the quality of materials due to which they have become highly popular in the recent years.

Wear Snygga Sjalar boat sales Every Day For A Stylish Look By: Sharon Evans | Jun 30th 2015 - Remember how at times you are ready to step out and yet, one look at the mirror makes you wonder - what am I missing? Snygga sjalar or stylish scarves are just what http://www.merriam-webster.com/dictionary/marina you need to perfect your reflection and enhance your looks.Exquisite Lehenga Cholis Online For The Sangeet Ceremony By: manishdutt | Jun 30th 2015 - This article talks in details about the new fashion trends in Lehenga that can be worn for Sangeet ceremony. It also gives instances of celebrity lehenga fashion statements.Send Beautiful Sarees For Your Dear Ladies As Gifts To India From Uk By: manishdutt | Jun 29th 2015 - This article discusses about the various beautiful sarees that you can send to India from UK for your dear ladies. The sarees offered on GiftstoIndia24x7.com will definitely make your loved ones look gorgeous.Create A Great Impression With Customized T Shirts India By: Pen Name jemmyjack | Jun 29th 2015 - Men and women of todays generation love wearing customized items that can make them look different and express a lot about their personality. If you wear customized outfits, you will get the opportunity to express your style statement. Right from customize ... Improve Your Website Ranking Using Los Angeles Seo By: businesssolution93 | Jun 29th 2015 - In the era of digital marketing, every entrepreneur is coming with their own website for promoting their products or services. But due to tough competition among all competitors, some websites receives less trafficking, while some receives more trafficking. A ... Before Your Baby Arrives, Get All The Necessary New Born Baby Products By: Susan Crasto | Jun 29th 2015 - Baby care is inevitable. It has to be done wisely with the right set of baby care products. Online shopping will make it easier for you, to get all these products without much hassle.Fashion Rules For Scarpe Uomo Online By: vikram kumar | Jun 29th 2015 - Footwear have become part of peoples necessities. You cannot imagine going out of your home without a pair of shoes. This is unlike the early days when people were used to walking bare feet and footwear was not really a necessity at all

Still can't find what you are looking for? Search for it!

http://www.articlesnatch.com/Article/9-8hp-Tohatsu-4-Stroke-Fs9-8-Review---Mariner-F9-8m-Review-Part-1/3442710

Why Buy A Center Console Boat


By:



What is a Center Console Boat?

Have you been looking for the type of boat that has multiple functions, can be used with the family as well as fishing, and is affordable? If you have, the Center Console Boat is just what you have been looking for.

Center Consoles are a type of powerboat with the console located in the center of the boat, halfway between the bow and stern. The hull is open and extends to the bow of the boat, with the deck surrounding the console. This makes it easy to walk around from the bow to the stern.

The hull is constructed of either aluminum or Fiberglass Reinforced Plastic. The hull shape can be a Deep Vee, Modified Deep Vee or Cathedral bottom. Some Center Consoles over 22' may have small toilet facilities located beneath the console. Aluminum and canvas T-tops are available to provide protection from the sun and heat.

How can I use a Center Console Boat?

These boats are extremely versatile in their functions; and can be used for fishing, skiing, tubing, and diving. With their excellent performance and maneuverability, you can take your center console anywhere. They are just as suitable to take out for water skiing on a calm lake, as they are for fishing on the rough seas.

To make accommodations for fishing; this boat can be equipped with rod holders, outriggers, baitwell to keep live bait, and ice lockers to keep your catch fresh on ice.

This type of boat is also commonly used as a tender for larger yachts.

Center Console Facts:

These boats usually range from 12 32 feet, with maximum capacities of 5 8 people. The cost of this boat ranges from $7,000 - $100,000, with average cost at $20,000. The most popular propulsion type of these boats is an Outboard engine. However, they can also be a Stern Drive or Jet Drive; with horsepower ranging from 40HP-500HP.

Center Console Boats have very little protection from inclement weather. They also are not equipped with bathroom facilities or sleeping quarters.

Popular Brands of Center Console Boats:

Contender Sea Hunt

Cape Horn Sea Fox

Yellow FinTrophy

FountainBoston Whaler

Triton Keywest

PioneerSail Fish

DonziBlue Fin



About the Author:

Kristy Bateman is the writer for Earl's outboards for sale Blog on SellUrBoat.com.. These articles are unique and helpful to anyone interested in learning about boating and or fishing. Please visit SellUrBoat.com to view a variety of unique articles from Kristy. SellUrBoat.com is The Simplest Solution to Buying and Selling 'Ur' Boat.

Article Published On:

http://www.articlesnatch.com - Fishing


Tags: , , , , , , , , , , ,

Fishing RSS Feed | RSS feed for this author

Big Carp And Catfish Bait-improving Secrets Of Cell And Live System Boilies And Nutcracker Food Bait By: Tim Richardson | Jun 30th 2015 - Many anglers use food baits because these most often attract big fish, but how can you make baits which are even better than leading readymade boilies and halibut pellets for instance? Here are some expert tips to help you enjoy far more big fish catches fast!How To Make The Best Nutritional Beginner Homemade Carp Bait! By: Tim Richardson | Jun 27th 2015 - Bait making is really exciting stuff empowering you to improve your catches fast! Beginners have so many questions because everything new hits you all at once; getting into homemade bait making entering a totally new world of exciting, creative stimulating possibilit ... Making Homemade Carp Boilies Exploiting Nutritionally-stimulating Protein Secrets For Instant Big Fi By: Tim Richardson | Jun 27th 2015 - Many anglers readymade boilies and pellets for the majority of their fishing yet very often just dont catch as many fish or number of big fish as fast as is easily possible to achieve! For example, in summer time you can very seriously boost your bait effectivenes ... Homemade Carp Bait Tips On Defeating Readymade Boilies In Summer And Winter! By: Tim Richardson | Jun 17th 2015 - You can beat any readymade boilie with unique homemade baits; this is a fact! Do you use bait dips, glugs and soaks with your readymade boilies? If you do add these to any bait then they are not optimised to become super http://en.wikipedia.org/wiki/Marina,_California concentrated solution which is the primary for ... Essential Carp Boilie Ingredients To Make The Best Homemade Baits! By: Tim Richardson | Jun 17th 2015 - You can beat any readymade boilie with unique homemade baits; this is a fact! Do you use bait dips, glugs and soaks with your readymade boilies? If you do add these to any bait then they are not optimised to become super concentrated solution which is the primary for ... Irresistible Carp Boilie Recipe Ingredients And Revealing Flavour Secrets Of Nutritional Baits! By: Tim Richardson | Jun 4th 2015 - You want to catch as many big fish as possible and there are very exciting bait substances, fish senses, and vital energy and metabolism clues to help you attract bags and bags more big fish to your hooks! Far too many anglers ask themselves the wrong questions about ... Big Carp And Catfish Boilie Ingredients For Making Winning Homemade Baits! By: Tim Richardson | Jun 4th 2015 - You want to catch as many big fish as possible and there are very exciting bait substances, fish senses, and vital energy and metabolism clues to help you attract bags and bags more big fish to your hooks! Far too many anglers ask themselves the wrong questions about ... Salt Boilie Bait Recipes And Belachan Carp And Catfish Baits For Big Fish! By: Tim Richardson | Jun 4th 2015 - The secret key to the success of Belachan is the action of natural bacterial enzyme activity! Natural bacterial enzymes partially digest the whole proteins within the prawn and shrimp. The natural digestion turns the proteins into freely soluble peptides and amino ac ... Homemade Carp And Catfish Boilies And Paste Secrets Of Irresistible Nutritional Baits! By: Tim Richardson | Jun 4th 2015 - More and more big carp and catfish anglers today want to make their very own winning secret homemade baits and need the very best information! The most usual way to start designing boilies, pastes and other carp baits, is thinking about ingredients and recipes. Prote ... Carp Boilie Recipe Ingredients And Irresistible Flavours Secrets Of Nutritional Baits! By: Tim Richardson | Jun 2nd 2015 - Make your baits work the best and catch the most fish! How many top flavours can you name and actually describe precisely why they work? The way that solvents and flavours alter water molecules as well as the powerful impact of flavour bioactive components mean you c ...

Still can't find what you are looking for? Search for it!

Site Navigation:

ArticleSnatch Authors:

For Publishers:

For Everyone:

http://www.articlesnatch.com/Article/Why-Buy-A-Center-Console-Boat/188229

Research and Markets: 2011 U.S. Boat Dealers Industry Report Out Now


DUBLIN--()--Research and Markets (http://www.researchandmarkets.com/research/83057f/2011_u_s_boat_dea)

has announced the addition of the "2011

U.S. Boat Dealers Industry Report
" report to their offering.

The U.S Boat Dealers Industry report, published annually, contains

timely and accurate industry statistics, forecasts and demographics. The

report features 2011 current and 2012 forecast estimates on the size of

the industry (sales, establishments, employment) nationally and for all

50 U.S. States and over 900 metro areas. New to the report this year

are: financial ratios, number of firms and payroll estimates. The report

also includes industry definition, 5-year motor boat historical trends on industry

sales, establishments and employment, a breakdown of establishments,

sales and employment by employee size of establishment (9 categories),

and estimates on up to 10 sub-industries, including motor boats, jet

skis, kayaks, canoes, and sailboats.

Industry Definition and Related Industries

NAICS 441222: Boat Dealers Industry

This U.S. industry comprises establishments primarily engaged in:

(1) Retailing new and/or used boats or retailing new boats in

combination with activities, such as repair services and selling

replacement parts and accessories

(2) Retailing new and/or used outboard motors, boat trailers, marine

supplies, parts, and accessories.

Related Industries

New Car Dealers

Used Car Dealers

Boat and Ship Building



U.S. Census Categories

NAICS boat sales 441222 Boat Dealers Industry is comparable to:

100% of SIC 5551 Boat Dealers

Sub-Industries

Boat dealers

Sailboats, unpowered

Motor boat dealers

Sails and equipment

Inboard boats

Marine supplies and equipment

Inboard outdrive boats

Marine supplies, nec

Jet skis

Outboard motors

Outboard boats

Canoe and kayak dealers

Canoes Inflatable boats

Kayaks

Sailboats and equipment

Sailboats, auxiliary (powered)

Please note, this report offers statistical information only and does

not include an analysis of the figures.

For more information visit http://www.researchandmarkets.com/research/83057f/2011_u_s_boat_dea

http://www.businesswire.com/news/home/20110223005783/en/Research-Markets-2011-U.S.-Boat-Dealers-Industry

Mercruiser Engine Parts Revealed


The Mercruiser engine is an advanced marine propulsion method and is accessible in recreational and commercial vehicles ranging from 1.5-liter displacement to 14.-liter displacements. They are generally two stroke diesel motor cars and are termed as inboards or stern drives depending for the automobile layout and design.

Mercury Marine was founded within the late 1930's, and inside of the 1960's merged with its recent mother organization, the Brunswick Corporation. Today, the organization continues to be noted for its selection of vessel engines and water propulsion equipment.

Even though the Brunswick Corporation also generates fishing boat engines via its other subsidiary, the Brunswick Vessel Group, Mercury Marine boatsales could well be the specialist for smaller boats that depend on outboard, inboard and sterndrive propulsion systems. The Brunswick Boat Group, inside of the other hand, specializes in greater vessels like yachts and other pleasure boats.

That's why it comes as no surprise that quite a few for the world's boaters look to Mercury Sea. The company's Mercruiser line of engines and sterndrives has led the market mainly because it was launched 45 years ago. Even now, the corporation remains among one of the most common names inside the industry simply because of its decades of offering outstanding boating gear to fans all around the earth.

You can discover a quantity of organizations that deliver Mercruiser boat parts, for enthusiasts who strive to keep their gear in top shape. A single certain doable avenue to explore when browsing for these vessel components is as a result of the world wide web, by way of community forums and web sites that characteristic motorboat pieces sold at wholesale rates.

The Mercruiser engine parts contain the following major pieces.

The Mercruiser Power plant:

They're the heart of any cars or moving vehicles and are readily available in 4, 6 or 8 cylinders capacities, particularly for stern drives. The engine rating and displacement or fuel technique are also essential for a unique purpose motorboat. These can be the substantial Mercruiser pieces and each engine contains a tag specifying specifics on the motor.

The Carburetor:

Carburetor is connected for the power delivery program and filters and regulates the supply of fuel for the motor. The carburetor is generally identified by its style and design (filtering and regulating power) or matching its pattern from the catalogue or handbook provided with the boat.

The Manual Exhaust:

These Mercruiser sections are utilized for removing combustion gases from engine by way of exhaust manifold. These are connected towards exhaust method.

H2o and Fuel Pumps:

Raw h2o pumps or circulating water pumps are utilised for cooling outboard engines by continuously circulating h2o. These pumps are supplied with total instructions and can be changed http://www.urbandictionary.com/define.php?term=marina effortlessly. Fuel pumps are little nozzles by way of which power, which is commonly diesel, is injected towards engine.

Marine Mufflers:



They are the silencers created from fiberglass and are created for backpressure compensation and resistant from corrosion. They are in cylindrical shape from distinct diameter of 1.5" to 12" inlet and outlet. These are appropriate for below waterline installation and can quickly be replaced.

Fresh h2o Program:

These will be the complete pump and pipe program for circulating fresh h2o employed for cooling 2 stroke outboard engines. These systems are accessible with full guidelines and can swiftly be transformed.

Oil Coolers:

These could be the cylindrical coolers utilised for cooling oil and these are usually readily readily available in different sizes from 5" * 1" to 12" * 1.25" and occasionally two cylinders attached together are furnished as dual coolers.

Engine and Gear Lube:

Service manual gives the comprehensive instruction to change motor and gear oil at specific interval and the oil must be altered as per the direction given in handbook.

Some other important mercruiser factors consist of electrical process; power steering, couplers and stern drive sections.

Identifying the mercruiser elements:

A tag is connected to identify powerplant style, serial variety of powerplant, transcom assembly serial quantity and drive serial quantity. Similarly for inboard transmission, style and serial numbers are offered on a tag on the top or side of transmission. You ought to used boats for sale verify the tag facts towards handbook furnished to you by the maker and both the facts must match.

Once you've located the correct model quantity with specified transmission details, you must see the factors facts as figure of just about each and every component may perhaps be furnished. You really need to identify the figure from catalogue or guide provided for you or you must check out the net site while using the producer. The moment the components corresponding to the figure continue to be identified, you have to note down the serial number supplied inside the catalogue or world wide web web page. Once you're able to locate the exact part amount and corresponding serial range, it's easy for you personally to purchase these sections directly from manufacturer or resellers.

The Mercury Mercruiser, known by most as "#1 about the water," is one from the most well-liked sterndriver engines you possibly can buy. But, due to its popularity, persons will come out with the woodwork wanting to sell you mercruiser elements when a thing goes erroneous. And, as everybody knows, in terms of engines something will sooner or later go inappropriate. Issues break down, quit operating, stop performing what they ought to. When this takes place, it's up to you to fix whatever may perhaps possibly be incorrect while making use of boat - whether or not you know specifically how you possibly can deal while using the difficulty, or not. Though you may possibly be considered a boat lover, this does not necessarily make you a boat mechanic. Sterndriver engines along while using the pieces that go into them might be quite complicated. Replacing them could possibly be a hassle and a headache, in certain inside the event you aren't specific about what you're performing.

Maintenance, Replacement, and Repair

Wherever do you begin out? If you desire to uncover essentially the most beneficial provide and still obtain the top quality elements you may well have to have, you could waste a lot of time calling distinct shops, driving close to, and wading via the mind-boggling data it's possible to uncover around the World-wide-web. To simplify your lookup, take a very good look at your owner's handbook ahead of you do a thing else. The owner's manual will tell you most anything you'll would like to know about your Mercury Mercruiser, including guidelines and suggestions on appropriate servicing. An informed determination is normally the correct choice.

http://www.articlesnatch.com/Article/Mercruiser-Engine-Parts-Revealed/1346223

Vauxhall Cars History by Tudor Mateescu


Vauxhall cars (the company is known as Vauxhall Motors) was born in UK and it became a very well known car company. Vauxhall outboards for sale Motors is a company subsidiary of General Motors- the worlds largest automaker.

The company was founded by Wilson Alexander in 1856 in a beautiful London city that gives the company name- Vauxhall. Initially, the company https://www.oceaniacruises.com/ships/marina/ name was Alex Wilson and Company, then Vauxhall Iron Works and it was specialize in building pumps and marine engines.

First Vauxhall car was built in 1903. It was a 5 hp model, using a tiller, 2 forward gears and no reverse gear. Interesting, dont you think? Beginning with this model, the car was designed in many other versions and then were available for sale.

When things start working, the company decided to increase its production and moved almost entire production to Luton in 1905. The company was selling cars under Vauxhall Iron Works brand. This stopped in 1907, when theyve decided to call the company Vauxhall Motors, a name kept over the years, till our days. The company was characterized by its sport models until the 1st World War and then designed only austere models.

Vauxhall Motors was bought by General Motors in 1925 for 2.5 million $. And from that year Vauxhall was influenced by American cars and with Ford (that was Vauxhalls main competitor) influenced the style of European car manufacturers.

During the 2nd World War car production was suspended because Vauxhall was needed to work on the Churchill tanks which was designed and assembled at Luton in almost 1 year. There were built over 5,600 Churchill tanks.



After the war, car production resumed but models were designed as a more mass-market product leading to expansion of the company. In the 60s Vauxhall acquired a reputation for making rust-prone models and that was very bad for it. Although the corrosion protection built into models the reputation dogged the company until the 80s.

From the 70s, many of company models were designed and built in partnership with Opel in Germany (Adam Opel GmbH- known as Opel is an automobile manufacturer based in Germany). Models like Chevette, Cavalier and Carlton were basically restyled versions of the Kadett, Ascona and Rekord. The Viceroy was a simply new version of Opel Commodore imported from Germany.



And that was the beginning for the Opelisation of Vauxhall. General Motors policy was that Vauxhall to be rebadged Opels, designed http://www.thefreedictionary.com/marina and developed in Russelsheim with much less help from Luton.

In 70s and 80s General Motors sold duplicate cars: Opel and Vauxhall alongside each other. General Motors Europe then began to standardize model names across both brands in early 90s. Almost all Vaxhalls models now have the same names as those of Opel (the exception is VX220 sold by Opel as Speedstar).

The Luton plant closed in 2000, but production still continues at the plant in Ellesmere Port. Despite already meeting efficiency targets, Vauxhall has been told to further improve its productivity.

Nowadays Vauxhall and Opel still reside together making the same cars but selling them to different markets.

So remember if you buy an Opel it's a Vauxhall and vice versa.

More information at this URL http://www.carsandtuning.org/cars/vauxhall/ about Vauxhall tuning and news.

http://www.articlecity.com/articles/auto_and_trucks/article_2057.shtml

Outdoors :: Broom 370 and Broom 455 Boat Reviewed


The Broom 370 and the Broom 455

Review by the Skippers Guide - as seen through the eyes of Broom Boat Customers.

Quality and Innovation at its Best .

Broom Boats have a reputation for knowing what their customers want. A long history of boat building underlies the business and with it comes a reputation for 'quality and innovation' .



This comes as no surprise as the yard has generated a loyal customer base, spanning generations, as well as an ever growing collection of new customers and admirers. Broom Boats know that today's customer demands economical engine performance, bright (and airey) interiors and a quality from 'home to home' feel . The use of quality materials, combined with modern lines and of course, fine sea-keeping qualities is as important today as it has always been and Broom have the track record to deliver.

Broom Boats response to their discerning customer needs are personified by the Broom 370 and 455. At the Skippers Guide we had a look for ourselves. This is not a technical write up. We talked to actual customers of Broom Boats. In summary, the overall feedback we received was that the boats are fantastic and indicated that Broom had delivered exactly what their customers wanted. The boats have been created by Broom with tradition and expertise, with the genius of design expert Graham Warren. The Broom 370 and the Broom 455 are definitely part of the love affair with Broom Boats. The new models excited their existing customers as well as enticing new customers. Success!

The art of successful new boat models must be to retain your existing customers and attract new ones to the fold. So the mantra is 'Unquestionably Broom. Definitely Different'. The Broom 370 and the Broom 455 are very obviously from the Broom Boat Yard but they are even better. Customers noticed that the Broom 370 has the trade mark aft cabin - always a winner with Yachtsmen. However Broom has enhanced this with a panoramic window. There is so much attention to detail including replacing hinged doors with sliding doors, an addition of a chaise longue along with modern fabrics, and the stairs being beautifully back lit. A top quality Bose entertainment system is in place to compliment the ambience. New customers are also very excited about the range of engines, especially the hybrid engine which can save a lot of money as you can now cruise just with the electrical power. Speed enthusiasts are also catered for with the http://animalcrossing.wikia.com/wiki/Marina Twin Volvo 330's which allows for speed and economical performance. This allows the discerning customer to enjoy luxurious cruising on the sea or river, but in the end, it is all about a personal choice.

The new features of the Broom 455 aft-cabin cruiser are completely overwhelming, with state of the art hydraulic submersible bathing platform, a huge upper deck with seating for 10 people and a sun lounger conversion too. The list goes on! Broom boat owners and potential customers seem to be really impressed with the 3 cabin layout. There are the two master state rooms with en suite facilities, and a third twin cabin which incorporates beds and wash facilities. Again there is a practical choice of quality engines allowing cruising speeds of 22, 28 or 30 Knots depending on the customers' choice of engine model.

The customers agree that the Broom 455 Broom 370 have taken fine cruising, comfort, harbour living and entertainment, to a whole new level.

Broom Boats received a lot of positive feedback from their loyal customers. They listen and they deliver! The overwhelming message from Broom customers past and present shows that Broom Boats with always deliver exactly boatyard what the customer wants.

Broom will be exhibiting a new 370 at the Tullet Prebon London International Boat Show on stand L117.

Broom will then be exhibiting a different 370 at Boot Dusseldorf the 43rd International Dusseldorf boat show in Hall 5 on stand 5D40.

Well done to Broom Boats!

www.broomboats.com

email : info@broomboats.com



http://www.articlebiz.com/article/1051530325-1-broom-370-and-broom-455-boat-reviewed/

BLACK-EYE ROYAL'S HUSBAND ARRESTED; Marina calls cops over hit claim.


The husband of Princess Alexandra's daughter Marina Mowatt was

held by cops yesterday for allegedly hitting his wife.

Police arrested Paul Mowatt after used boats for sale Marina, goddaughter of Prince

Charles, made a 999 call saying she had been beaten up.



Officers who raced to the couple's home found the 30-year-old

nursing a black eye.



Her husband was arrested for assault, handcuffed and driven away



just before midnight on Saturday.



Photographer Mowatt, 34, was interviewed by detectives yesterday

but released without charge after Marina said she wanted the case

dropped. Police said: "She has withdrawn her assault

allegation."



The http://animalcrossing.wikia.com/wiki/Marina couple, who http://www.amazon.com/s?ie=UTF8&page=1&rh=i%3Aaps%2Ck%3AMarina share a Surrey home with their children, Zenouska,

seven, and Christian, four, would not comment last night.



Marina split from Paul last year over violence claims but the

couple were reunited.



COPYRIGHT 1997 MGN LTD



No portion of this article can be reproduced without the express written permission from the copyright holder.

Copyright 1997 Gale, Cengage Learning. All rights reserved.



http://www.thefreelibrary.com/BLACK-EYE+ROYAL'S+HUSBAND+ARRESTED%3B+Marina+calls+cops+over+hit+claim.-a061071982

New & Used Boats For Sale In Calgary


Are you in the search of a good boat dealer in and around Calgary? It is a crucial thing to select the best one from the different available dealers in Calgary.

You can select the most appropriate dealer and the latest offers through the boat shows. You will have to consider few things before buying the new boat. The following tips help you to have the best deal.

1)Attend the boat shows nearby to have a clear idea of the new arrivals and trends in boat market. This also helps you to decide which boat fits your needs. The requirement of each varies. Some demands pontoon boats where as few others prefers speed boats. Some decide to buy the boat for fishing; cruising or other gaming activities. A boat show will show case different varieties of boats for different users.

2)Collect as much reviews brochures and knowledge from the local dealers as well as builders in and around Calgary.

3)Style plays a key role. It depends on ones personality and fashion. Trend is another factor. So determine the style you need for your boat.



4)Now keep an eye on the size of the boat you need. You can avail a vast choice on the size of the boat. Usually style will determine the size mercury boat motors of the boat.

5)Next step is to choose the preferences that suit your needs. Boat dealers in Calgary are few in number. But you have to find the best deal that goes well with your requirements.

6)Boat capacity is another factor to be considered. Select the boat based on the number of people http://www.sailor.lib.md.us/services/marina/default.aspx?id=56300 who are going to accompany you in water.

7)Engine capacity is an important consideration of many. The larger the engine, the fastest your boat goes. You can have a good awareness on the latest engine technology from boat shows. It also gives you a good platform to consult with the dealers of Calgary about the latest models and trends in boat engines.

8)Consultation with boat owners is of great help to understand the positives and negatives of the boat they own. This also gives you an insight in to the issues you will have to face as a boat owner.

9)You can do a home work on the boat market through some journals, classifieds and newspapers. A good research on oats in Calgary helps you to decide the best deal. A recognized broker can do great help in this.



10) Boating accessories is another matter of importance. You can avail a variety of furniture, lights, seat covers etc. You can get a good idea on these from the Calgary boat dealers.

About used boats the Author:

Boatscalgary dot com has been providing tips and information on New used boats for sale in Calgary.

http://www.articlesnatch.com/Article/New---Used-Boats-For-Sale-In-Calgary/1138073

Outfits and Accessories to Wear with Boat Shoes


Reinvent new combinations of what you already own. Improvise. Become more creative. Not because you have to, but because you want to. Evolution is the secret for the next step.

-- Karl Lagerfeld

Call them boat shoes or deck shoes, they are an indispensable part of the polished, preppy fashion. Although the shoes were originally designed for boating, the ever-changing fashion industry has roped them in to fit for almost any type of casual wear. Apart from the rules and essential tips for wearing boat shoes, we will also see how women and men can style them.

Styling Women's Boat Shoes

A great thing about boat shoes is that you don't have to go shopping for new clothes in order to wear them. Your current style can easily work with these shoes, if you know how to mix and match outfits. Opt for vibrant-colored boat shoes in mustard yellow, blood orange, fiery red, sea green, etc., that will set you apart from the crowd. You can look for options from various popular brands like Sperry Top-Sider, Sebago, and Timberland. They have shoes in so many colors and styles that it's quite difficult to resist yourself from buying more pairs.

It's always a good habit to not overdo bold colors throughout the ensemble. If you're wearing clothes that lean mostly toward neutral and pastel colors, experiment with bright-colored boat shoes, and vice versa. They look amazing practically with anything. However, make sure you don't wear boat shoes that are lighter than your khaki and colored pants, shorts, jeans, or skirts. The only exception to this rule is white boat shoes.

Styling Men's Boat Shoes

While shopping, do check out the different types of boat shoes available. You can find them in leather, rubber, satin, suede, and canvas. The leather boat shoes are the traditional ones that were designed to provide stable footing for boating. However, different materials are used to make various styles to be worn while running errands or attending a party.

In order to wear boat shoes properly, you cannot let the length of your bottoms go beyond the ankles. When you wear pants or jeans that are relatively longer, fold them so that they http://www.dubai-marina.com/ stay above your ankles. To add a splash of color and smarten up your style, pair boat shoes with chinos, slim-fitting jeans, pants (not dress pants, mind you), or print shorts for bottoms. As for the top half, pick polo shirts, white shirts, fitted t-shirts with bomber jackets, khaki blazers, cardigans, or Oxford shirts and tie.



A general rule, which applies to both men and women, is that you should never wear socks with your boat shoes. Let these trendy and uber-preppy pair of boat marine engines shoes be your go-to shoes for dressing up. Follow the tips mentioned in the article, and take some time to think about how to incorporate the shoes in your wardrobe.

http://www.buzzle.com/articles/outfits-and-accessories-to-wear-with-boat-shoes.html

Military diesel engines: more punch at each stroke; a brief survey of what western industry has to offer.


Military Diesel Engines: More Punch at Each Stroke

It is probably true to say that whatever their merits as regards

performance, adaptability to a particular weapon system and other

features, engines will in the final analysis be largely chosen by

military procurement agencies on the basis of their country of origin,

and that a local product, or one built under licence locally, will

usually have priority over one manufactured abroad. Moreover, military

assistance funding (such as is practised by the USA) and/or favourable

credit terms are major decision criteria, so that the engine's

technical quality is not always the dominant factor in its choice.



Another point worth making is that "military specials",

i.e. engines specially developed for military applications, are in the

main only found in armoured combat vehicles. All other engines used in

military vehicles tend to be derivatives of standard commercial designs.



Diesel Engine Manufacture



in Germany



Probably the best known German military diesel manufacturer is MTU (Motoren- und Turbinen-Union GmbH) which, together with its aeronautical sister company (more properly speaking parent company) MTU Munchen

constitutes the Engine Division of the Daimler-Benz-Subsidiary/Deutsche

Aerospace AG. In 1969 MAN's and Daimler-Benz's activities in

the high-speed diesel engine field were concentrated at MTU in

Friedrichshafen.



In the 1950s Daimler developed at the request of the Swiss Army a

tank engine for the Panzer 61, out of which there grew a successful

series of over 14000 units, the MB-837, consisting of six, eight and

ten-cylinder engines developing between 330 and 1030 kW at 2400 rpm.

The high performance and reliability of the above series contributed

significantly to the success of the Leopard 1, which was powered by the

1030 kW unit. Engines of this series are also found in the Swiss Panzer

68, in the dieselized Turkish M-48 as well as in the Marder APC and

Jaguar rocket-firing tank-killer.



More compact in size albeit with higher performances is the second

generation of tank engines which was developed as from the mid-60s, the

870 series, comprising eight, ten and twelve-cylinder engines of 880 to

1100 kW (with an upper limit of 1320 kW) at 2600 rpm. The 12-cylinder

MB 873 Ka-501 powers the Leopard 2, and its 8-cylinder version the

Korean K-1.

Whilst the second-generation series was able to develop some 800 kW

for a volume of one cubic metre (including all the for most part

integrated accessories) - as compared to the first generation's 500

kW - the current third generation of MTU engines, the MT 880 series,

offers 1100 kW/[m.sup.3]. At the same time the weight has been reduced

by 16%, the number of parts by 33% and fuel consumption by 12%. At 3000

rpm the 6, 8, 10 and 12-cylinder engines of this new series develop

between 550 and 1100 kW. The 12-cylinder MT 883 - with reduced

power-has been mounted in the two competing German armoured howitzer 2000 prototypes. The production model of the latter is due to receive

the 8-cylinder MT 881, the same engine as that planned for the Marder 2

APC, which is still under development. Built again on the modular

principle, as all MTU series, it has considerable logistic advantages

for the user since different types of vehicle can be powered by the same

engine base and the number of spare parts reduced. The small size of

the MT 880 series reduces the area of the engine compartment requiring

armour protection and enables more powerful front-drive vehicles to be

built (as is the case with the howitzer 2000).



Until now the highest horsepower rating installed in main battle

tanks has been 1100 kW. Although 1100 kW is seen as sufficient in

Germany to power a 60-tonne tank, higher ratings might be required in

the future to power electromagnetic gun-equipped main battle tanks. In

this case, diesels would have a serious rival in the shape of the gas

turbine. A diesel-electric powerpack would have to be used to enable

the reciprocating engine to run constantly at its nominal power speed

and drive a generator from which electric power would be picked up to

feed the running gear motors and the guns. The 44-litre V12 MT 880

engine could attain a tidy 1600 kW power rating.



The development of such high-performance engines naturally costs

money, and since the series are not all that large, these units do not

come cheap. This is where the competition comes in, as it would like to

gain a foothold with more or less "militarized" derivatives of

commercial vehicle or ships' engines in the battle tank field.

True, these engines are bigger in size and hence heavier than MTU's

Special-Purpose Engines but, as they are mass-produced, they come

cheaper. In West Germany there are two such competitors above all: KHD and MAN.



From the ship's and heavy vehicle Deutz MWM 234 engine (6 to

12 cylinders developing 200 to 900 kW) KHD developed the Deutz MWM 834

series. As fitted to the Brazilian Osorio battle tank the TBD 834 V 12

develops 810 kW at 2300 rpm. (It can also be installed in the AMX-30,

amongst others). As opposed to the 234 series some of its components

have been adapted to military requirements. The same goes for the MAN

six-in-line cylinder 325 kW D-2866 engine which powers the Krauss Maffei

Puma 1 light Armoured Combat Vehicle, which is a military version of a

tried and tested ship's and truck engine. The heavier Puma 2 will

be receiving the 10-cylinder MAN 550 kW D-2840L diesel engine.

MTU is also following this path in the lower powered category: thus

with its MT 183 series it offers 6 to 12-cylinder diesels from the most

up-to-date Mercedes-Benz OM 440 commercial truck engine series. Only

very minor modifications have been made to the original engine. For

re-engining the M-113 MTU offers its 6 V 183 TC 22 developing 257 kW at

2100 rpm.



Marine Engines



MTU occupies very much the same leading position in naval warship diesels as in the battle tank field. Its high-speed and hence light,

turbocharged diesels power both small patrol boats and 3500-tonne

frigates, not to mention fast merchant ships and locomotives. MTU

diesels are predominant above all in fast patrol boats (FPB) all over

the world. The smallest series, the 331/396, numbers 6 to 12-cylinder

engines with power ratings between 525 and 1920 kW at respectively 2340

and 2100 rpm. The magnetically compensated MTU 396, with a slightly

larger cubic capacity than the 331, powers the new SM 343 and MJ 332

mine countermeasures (MCM) ships of the German Navy and also serves as

an auxiliary power plant on larger warships.



Fitted with a turbocharger for back-pressure running, the 396 is

also used for submarine propulsion in four classes of German export

U-boats. It is in addition earmarked for the future class 212 U-boats.



The MTU 538 series, comprising 12 to 20-cylinder, 1780-4120 kW

engines developed by Maybach, is the traditional form of propulsion for

FPBs.



The 2520 to 7400 kW range is covered at the lower end of the range

by the atmospheric 12-cylinder 956 (2520 kW at 1500 rpm) and at the top

by the turbocharged 20-cylinder 1163 (7400 kW at 1200/1300 rpm). These

engines are used as the main power plants in frigates or FPBs, either in

a CODAD installation (as in the Turkish Yavuz class frigates) or as

cruising engines in a CODOG configuration (as in the German F-122 and

F-123 frigates). For better performance, lower fuel consumption and

part-load running the most up-to-date versions are equipped with

cylinder cut-out, charge transfer and sequential turbocharging.



Deutz MWM's commercial ships' diesels, which cover power

ratings of up to 3000 kW in 6 to 16-cylinder engines, are in widespread

use as auxiliary power plants in warships. They are used for example in

the German Navy F-122 and F-123 frigates, FPBs and the new MCM ships

(demagnetized). However, they are being increasingly used also as main

propulsion units in, among others, the three class 423 fleet support

ships of the German Navy (each of which is powered by two SBV 16M 628s

developing 3200 kW at 1000 rpm) as well as in foreign patrol boats.

Wheeled Vehicle Engines



The Bundeswehr uses plain commercial engines in its soft wheeled

vehicles and thus has a wide choice. As a general rule the vehicle

manufacturer is also the engine manufacturer: so one finds a Mercedes

diesel in a Mercedes truck, a MAN diesel in a MAN truck, and so on.

However, there is an exception: the Bundeswehr prefers air-cooled

engines in its cross-country vehicles amongst other things because of

their greater invulnerability to bullets and shell splinters compared

with the water-cooled variety. Thus the highly manoeuvrable cross-country MAN-built trucks or special-purpose vehicles are powered

by the Deutz Diesel BF8L513C (265 kW) engine which is also used by the

IA1 category vehicles which serve inter alia as carriers for the Patriot

and Roland.



One should not of course forget the large number of lower powered

diesels used as stationary, mobile or vehicle and weapon system-mounted

APUs and pump engines. Among these there are of course commercial

diesels from a large variety of manufacturers, in addition to those

already mentioned (like Deutz-Diesel, whose plants are used for

electrical power supply in the Roland air defence missile system), such

as the Bavarian engine manufacturer Hatz, which covers a broad range

from 1 to 60 kW.



As the world's armed forces have to cope with shrinking

budgets, they will tend more and more to look around for commercial

engines or their derivatives. This applies more particularly to the

lower power ratings. Nevertheless, there will still be a need for the

"military special" such as is used in armoured vehicles. The

aim of all developments in West Germany is to make the diesel a higher

performance, more user-friendly and above all more environment-friendly

engine.



Diesel Engine Manufacture



in France



There are three manufacturers of diesel engines for tanks and

armoured wheeled vehicles in France: SACM Diesel, Baudouin and Renault

Vehicules Industriels. Renault's policy in this branch of its

activities, which accounts for 15% of its Defence Equipment

Division's turnover, stems from its status as a truck manufacturer,

in other words it derives its range of military diesels from its

mass-produced commercial engines, which is a new approach as far as tank

engines are concerned.



The only tank engine still specifically manufactured by Renault

V.I. is the HS 110, which powers the AMX 30 family. Below 500

horsepower its range consists in the main of two power plants. The

first one is the 602.26, a six-cylinder in-line, six-litre engine which

is due to equip the VAB NG, a 180 kW engine that has passed the NATO 400-hour test. It has also been certified by NATO for kerosene propulsion - a new requirement looming up in 1994-95 since by then NATO

will be supplied by a pipeline conveying only kerosene. The 602.26 is

due to be boosted to 220 kW. Then there is the 620.45, a six-cylinder,

9.84-litre engine which up till now has powered the VAB, and which one

also finds on the VTL G290 and the TRM 10000. Apart from the VAB

version this engine is essentially a commercial truck engine, but it is

intended to militarize it by uprating it to 365 kW.



Beyond the above we come to the E9, originally a Mack design, a

16.4-litre direct injection supercharged diesel engine. This 365 kW

engine is produced in thousands by Mack with a 500-horsepower rating for

commercial-type vehicles. A militarized E9 version has been developed

by Renault with a 515 kW rating for powering the TRM 700-100 tank

transporter and also with a 550 kW rating as a tank powerpack. The 550

kW version is embarking on its 400-hour NATO test at the GIAT ETAS

(Etablissement Technique d'Angers).



In addition, Renault is jointly developing a 735 kW E9 with Mack

which should complete its 400-hour NATO certification tests by mid-1991.



Taking advantage of current heavy investments, Renault covers the

entire power range up to 735 kW rating with relatively easily produced

engines whose procurement and running costs are lower than those of

purpose-built engines.



The engines in the 735 kW range and above are of a technological

design far removed from that of truck engines - apart from those

equipped with a hyperbar system (as a matter of fact the E9 made a

successful demonstration at a power rating of 1100 kW fitted with a

hyperbar system in 1985) - and Renault would prefer to see what can be

achieved in this range in cooperation with heavy engine specialists like

MTU or Perkins.



In 1989 Renault delivered 320 tank engines and clearly intends to

make this side of its activities a specific branch of development.



Backed by its experience with the sale of close on 30000 diesel

engines marketed over the last 40 years under the names of Poyaud, MGO and AGO, the SACM Diesel group (Societe Alsacienne de Constructions

Mecaniques) designs, manufactures and markets, under the make Uni

Diesel, a complete range of gaz (LPG) and diesel engines all belonging

to the high-speed diesel category (1000 to 2500 rpm) and with power

ratings extending from 200 to 10000 HP for cylinder http://www.funnyordie.com/articles/0e2ad72eeb/marinawarehamboatyard?preview=BAhbB2kDjLYGSXU6CVRpbWUNh8EcgPvdBNAHOgtvZmZzZXRp/qCrOgl6b25lSSIIQ1NUBjoGRVQ=--1a5134c980f1a1aaaaf672394936aa12095a34ee bores of 135 to 240

mm. SACM Diesel produces power plants both for armoured vehicles and

seagoing and railway applications.



Its ground vehicle engines are represented by the new X range and a

few engines of the old UD 18 range, the latter being still turned out in

essence for re-engining. The X range comprises: two engines under

development with power ratings of 365 and 475 kW, namely the

conventional supercharged UD V6X T5 and the twin supercharger UD V6X T6;

a V12, the 1300 HP UD V12X developed for the AMX 40. In the planning

stage are the 625 kW UD V8X T6, which may be installed on the export

version of the AMX 30 C2, and the 550 kW UD V8X T55 and 535 kW UD V8X

T5, both under consideration for the reengining of the French

Army's AMX 30 B2, a project on which SACM is competing with Renault

and Baudouin. The V8 range of engines is also due to re-engine the

Soviet T tanks.



SACM Diesel has been selected as the engine supplier for the AMX

Leclerc, the French Army's future battle tank. The engine that has

been developed for the latter is an 16.47-litre V8 engine (with a 142 mm

cylinder bore and a 130 mm stroke) developing 1100 kW at 2500 rpm.

Called the UD V8X 1500 T9, this highly supercharged engine works on the

Suralmo hyperbar principle.



This 1100 kW engine is no larger than that of the AMX 30, which

develops 513 kW horsepower, thus enabling the size of the chassis and

the weight of the hull to be reduced, thus allowing for an increase in

armour protection. With a weight of two tonnes, its volume is two cubic

metres. The engine can run at an outside temperature of -30[degrees] to

+ 150[degrees]C. and enables a 50-tonne tank to accelerate from 0 to 30

km/h in less than five seconds.



Production of the US V8X T9 is due to start at the end of 1991. It

has been put through performance trials in the USA, at the request of

TACOM, at the same time as a MTU engine and a Rolls-Royce engine. The

Americans are said to be on the lookout for diesel engines that could be

installed in the M1 Abrams, which is at present powered by a gas

turbine.



Since the first of January 1989 the ALSPI group (Alsacienne de

Participation Industrielle), which owned SACM, has surrendered 42% of

its shareholding to the Finnish Wartsila financial group, a specialist

in marine diesels.



Baudouin, a subsidiary of Maneurop (of the Paribas group) has for

over 70 years been producing seagoing diesel engines of 53 to 1030 kW

(for fishing boats, pleasure boats and harbour launches, etc.) as well

as industrial and military diesels. In 1989 its defence branch

accounted for 15% of the firm's turnover, of which marine engines

made up 70%. All the engines offered by Baudouin for military purposes

are derived from series-produced marine engines. From a standard F

range six-cylinder engine Baudouin has developed military power plants

ranging from 125 kW to 300 kW.



Thus the 6 F11 SRX, a two-stroke charge-cooled V6 engine of 6.4

litres cubic capacity and developing 220 kW at 3000 rpm has been chosen

to re-engine the French Army's AMX 10 RC as from the sixth phase of

the programme (previous types having been powered by the Renault HS

115). The Baudouin engine is also due to equip or re-engine all

versions of the AMX 10. This represented a 450-engine order for the

French Army (370 vehicles plus spares), while another 50 were installed

in the AMX 10 P and tracked PAC 90s delivered to Indonesia.



The engine is distinguished by its low fuel consumption, the low

smoke content of its exhaust gases, its improved power and its lower

purchase price compared with the HS 115.



A version developing 205 kW at 3200 rpm, as well as a Detroit

Diesel engine, have been proposed to power the AMX 13s retrofitted by

Creusot-Loire Industrie as a replacement for the original Sofam petrol

engine.



Creusot-Loire Industrie has chosen a Baudouin engine for its new

tank. This is the 6 F12 SRY, derived in a straight line from the AMX 13

engine and uprated to 295 kW. Its use with a Renk automatic

transmission is being considered. The engine could also meet the export

AMX 10s' re-engining needs.



The French Gendarmerie's VXBs have all been re-engined by

Baudouin. Baudouin has also provided 36 auxiliary power units for the

Thomson-CSF Crotale launch vehicle.



Still in the F range, the 615 kW V12 15-litre 12 F120 SR, derived

from a pleasure boat engine, has been selected to power the future Engin

de Franchissement de l'Avant (EFA-combat bridging system) due to be

put in service in Engineer units. It has been certified by the ETAS

(500-hour trials) with a power rating of 495 kW and 513 kW, and further

certification at 535 kW has been applied for.



Concurrently with this adaptation of the F range to ground

vehicles, Baudouin has also supplied 314 power plants and 198 generators

for the French Navy's harbour launches and landing barges.



Diesel Engine Manufacture



in the United States



Several recent efforts in the area of US military diesels include

development work on the Army's Advanced Integrated Propulsion

System (AIPS) retrofit programmes to upgrade the performance of existing

combat systems, and a possible joint venture initiative directed toward

overseas markets.



In the programme conducted by the US Army Tank Automotive Command

(TACOM), the diesel prototype propulsion system being developed for a

full-scale demonstration in FY 90 is the XAP 1000 using the Cummins

Engine Company XAV28 as the core. Cummins reportedly will demonstrate

770 kW sprocket horsepower from their system during the mid-1990

demonstration. The company demonstrated 550 kW horsepower from their

system during the summer of 1989.



Cummins currently provides the 370 kW and 440 kW horsepower

VTA-903T V-8 diesel engine used in the M2/M3 Bradley Fighting Vehicles

as well as in the Multiple Launch Rocket System.



Contractor representatives decline to discuss current AIPS

programme status, citing the sensitivity of the TACOM contract.

However, considerable information can be found in the programme

description disseminated by the US Army's Armor Center at Ft. Knox,

Kentucky. According to that description, AIPS is a US government

programme "to develop advanced propulsion system technology for the

next generation of heavy combat vehicles. The engine, transmission, and

other components for AIPS are being designed as an integrated system.

This approach ensures maximum system performance and efficiency and more

efficient packaging."



The two AIPS prototypes are scheduled to complete testing during

next summer, after which "one of the two concepts will be selected

for further development."



Another US company with a strong track record in military diesels

is Michigan-based Teledyne Continental Motors. Its AVDS-1790 is

utilized in 60 percent of the main battle tanks fielded in the free

world. TCM continues its strong product line featuring both new and

remanufactured 1790 series diesel engines. Its new "Red Seal"

range includes 550, 660, 770 and 880 kW units with new components that

include a solid pin crankshaft, hardened cylinder bores and improved

exhaust manifolds. TCM's confidence in the reliability and

performance of these engines is evident in the 1000-hour or four-year

warranty provided.



Teledyne Continental Motors has also developed a "Gold

Medallion" kit for older AVDS-1790 "RISE" engines. This

kit features the same improved components found in the new engines but

is designed for installation during the regular overhaul process.



Retrofitting



Since TCM did not receive a new diesel development contract under

the AIPS programme, company representatives characterize their present

emphasis as "retrofit and service to foreign markets".



One domestic retrofit opportunity that holds significant business

potential would be a major retrofit programme for US M60 MBTs. At the

present time, a large number of these systems are fielded with US Army

Reserve Component (Army Reserve and National Guard) elements. Although

these Reserve Component forces expect eventually to replace their M60

MBTs with new M1 series tanks, continuing cuts in the M1 production line

keep postponing that expected replacement date further into the future.

At some point those M60 units will be forced to select an upgrade

programme to maintain combat viability. Continuing cuts in the M1 MBT line could force such a decision in the mid-1990s.



Another US upgrade programme that might provide new diesel

opportunities is the M88A1E1 (M88A2) Tank Recovery Vehicle. The winning

M88A1E1 prototype featured the 770 kW TCM AVDS 1790-8DR diesel (versus

the 552 kW TCM AVDS 1790-2DR diesel found in the standard M88A1).

Although the Army decided to continue with full-scale engineering

development of the M88A1E1 in December 1988, they did not proceed with

system procurement. However, there are indications of recent movement

in some circles to proceed with that programme.



One foreign market opportunity being explored by TCM is a new 1100

kW joint venture programme known as the AVDS 1790-15A; the engine is

currently being offered to several overseas markets. After laboratory

testing at 1065 kW TCM has determined that the AVDS-1790 can reliably

produce 1100 kW horsepower in its present form. Under this programme

TCM would provide a manufacturing license for the new engine together

with a technical assistance agreement covering both engine development

and manufacturing. Although the new engines would not carry the same

1000-hour warranty, TCM representatives point out that the AVDS 1790-15A

is based on a very mature engine design and they logically expect the

same level of performance.



Diesel Engine Manufacture in



the United Kingdom



Genuinely indigenous United Kingdom military automotive diesel

engine manufacturing capability is centred on Perkins Engines which has

a product line embracing both logistic and armoured vehicles. However,

increased emphasis on competitive procurement in the domestic market,

and the current interest in the turbine-powered M1 for the

Britain's current MBT requirement have led to increased competition

for defence-related business.



The Perkins Eagle MX series acquired with its mid-1980s purchase of

the Rolls-Royce Diesels business provides power in the 146 to 292 kW

range for the British Army's DROPS Medium Mobility (Leyland DAF)

and Improved Medium Mobility (Foden) load carriers, Foden heavy recovery

trucks and Tank Transporters (Leyland DAF/Scammell), and is assured a

role in its future wheeled bridge launcher programme. The Eagle product

provided Perkins with an ideal complement to its own 6.3544 106 to 185

kW, 4.236 and 8.640/540 engines, which power amongst other military

vehicles, the Alvis Stormer (T6.3544 - 146 kW), Engesa Ogum (T4.236) GKN Simba (TV8.540 - 158 kW) and the ACMAT truck range (T6.3544).



At the top of the power spectrum Perkins' Condor V8 rated at

395 kW powers the Warrior mechanised combat vehicle. With a growth

potential up to 735 kW the V8 seems assured of a continued role in

programmes calling for premium performance from a proven high-density

power pack and the reliability that reflects its well-proven Eagle

origins. Much the same can be said of the Condor V-12 which is

installed in the Challenger MBT in a 880 kW form but has been

demonstrated at 1100 kW and is said to have the potential for



development up to 1470 kW. This proven technology positions Perkins

well to adopt a "power pack approach", matching engines and

transmission systems to meet new-build and retrofit requirements for

cleaner high-output engines with a smaller installed volume. Its

engineers are examining the application of Variable Geometry and

Positive Displacement turbocharging to such needs and, in conjunction

with the development of electronic engine management techniques, how to

control such systems in real time in response to changes in operational

load and environment.



Likewise, the revolutionary Quadram piston design adopted for the

company's Phaser engine sets new standards in fuel efficiency and

improved performance which are said to be particularly applicable to

emerging mid-range requirements including the upcoming United Kingdom

Future Family of Light Armoured Vehicles.



Cummins' most significant British coup to date has been the

selection of its MILPAC 600/660 Power Pack - based on the VTA903T V8

engine - for the VSEL AS90 SP 155 mm howitzer. The 903 Series is

already familiar to military users as the power plant for such vehicles

as the MLRS launch vehicle and the Bradley series of infantry combat

vehicles, and Cummins is also trying to break into the re-power market

with a version of its mid-range 8.3 litre C Series (normally rated

between 110 and 184 kW) for M113 re-power programmes. In 1989 Cummins

increased its influence in the West European military truck market -

albeit at arm's length - when the Leyland-DAF 4 X 4 for which it

builds the Leyland-badged engine was selected by the MoD as its

"next-generation" four-tonne load carrier.



Marine Engines



British naval programmes continue to offer reasonable prospects for

propulsion and power generation specialists and to create an ongoing

demand for state-of-the-art diesels. The CODLAG configuration of the

Type 23 frigates, the four-boat programme for the Upholder class of

conventionally powered submarines, and the British and Saudi Arabian

requirements for the Sandown-class SRMH not only underline the dominant

position of the Paxman Valenta series in the market but also its

versatility in the 540 to 3670 kW power range. This owes much to a

design emphasis on achieving a high power-to-weight ratio, which has

been carried downstream in the closely-related Vega range which Paxman

(a GEC subsidiary) believes to be http://www.amazon.com/s?ie=UTF8&page=1&rh=i%3Aaps%2Ck%3AMarina more suited to roles closer inshore.



Perkins too has achieved considerable success in naval markets with

navalized versions of its Condor range, its widely-used Range 4M family,

and more recently has offered a navalized version of its Prima

turbo-charged engine producing 57 kW at 4500 rpm to provide

near-gasoline performance for powering planing, semi-planing and full

displacement hulls.



Increased interest in high-performance diesel outboard engines has

led to several promising new designs. AQAP-approved EP Barrus,

designers of the Mariner range of outboards, has a new range of diesels,

whilst Coventry Climax has recently introduced its Climax 25 18 kW unit

which is said to offer the advantages of 60% fuel savings and a longer

service life than an equivalent kW two-stroke.



Diesel Engine Manufacture



in Scandinavia



Sweden's automobile industry, although somewhat restricted in

the scope of its military activities, has a reputation for the

production of truck diesels that commands universal respect. The

country's Combat Vehicle '90 programme is unquestionably one

of the most interesting of current military vehicle programmes. The

selection of a version of the Scania DS14 engine as its power plant

reflects its designer's conviction; namely that state-of-the-art

commercial engine design now makes it possible to employ a

high-torque/low specific fuel consumption truck engine derivative to

power armoured vehicles required to operate in arduous environments.

The AFV http://marinavikings.org/ adaptation of the 14-litre charge-cooled DS14 - which is more

usually installed in premium trucks rated at around 295 to 345 kW -

features dry sump lubrication and a lowered profile for the charge-air

cooling subsystem. Navalized versions of the DS14 are in service with

the Swedish Navy to power one of its 201 personnel landing craft and,

more significantly, its six Landsort-class coastal minesweepers.



Sweden's other internationally renowned truck-builder Volvo

tends to focus its efforts in the military automotive market on the sale

of complete trucks. Thus its newly-developed 355 kW TD162FL diesel

which delivers 2160Nm torque at only 1100 rpm is likely to attract the

attention of military logistic fleet operators. The engine has already

been used to power a range of heavy duty tractive units based on the

company's F16 6 X 4 chassis, and is likely to be proposed for

DROPS/PLS-type systems in which a high degree of mobility is sought for

heavy combat stores pay-loads.



Sweden's Hedemora has achieved a close identity with

Kockums-built submarines and has supplied engines for surface vessels

operating in some support roles. However, the Volvo Penta range is

probably the most widely used of the Scandinavian marine diesels, with a

product line that spans the 13 to 405 kW range. Although the Volvo

Penta range is often thought of in terms of applications in the workboat band of the power spectrum, its new TAMD162 6-cylinder 16-litre can be

used typically (in multiple configurations) to power Ro-Ro vessels via

1000 kW electric motors.



Finland's domestic truck-builder Sisu acquires the engines for

its military product line from several sources including Cummins, Deutz

and the indigenous product from Valmet. The country's principal

marine diesel manufacturer Wartsila is a major supplier in the merchant

vessel sector of the market and provides the engines for vessels

employed in a broad spectrum of support roles.



http://www.thefreelibrary.com/Military+diesel+engines:+more+punch+at+each+stroke%3B+a+brief+survey+of...-a09046423

Living aboard Argonaut II: In the Boatyard


Since I have no mechanical, electrical, or tool using skills, I do the scraping, sanding, and painting. We ended up painting just the starboard side green paint, the yellow boot stripe on both sides, and the bottom paint. Jerry worked with me part of the time, but also worked on the electrical issues and the rudder. I had originally put together a procedure for top-sides painting as well as the bottom paint procedure you see below. However, on second thought, there are so many variables that must be considered for our quick and dirty method, I really need to publish a complete hub devoted just to this matter. Bottom paint is a lot simpler.

A Bit about Bottom Paint

Some people feel that a wooden boat, kept mostly in fresh water, does not need bottom paint. Bottom paint is designed to stop teredos and other wood damaging organisms from attaching to the hull. However, though bottom paint does not stop algae and slime growth, it does retard it.

There are two main types of bottom paint: soft or ablating and hard. To use the newer style paint that dries to a hard surface, we would have to completely strip all old paint off the surface and prime the surface before adding several coats of paint. In addition, it is very expensive and contains even more toxic, dangerous ingredients than ablating paint. However, once hard bottom paint is in place, it is, overall, less labor intensive than soft paint.

After much debate and research we decided to go http://vermontmarina.com/ with the type of bottom paint that has been on Argonaut II since 1922--soft, ablating paint. It is less expensive: we bought navy surplus at about $350 per 5 gallon can. The main toxic ingredient is copper, a heavy metal. This paint can be applied the day you go back into the water because it never really dries completely.

The first time I used bottom paint was 1998, on our first boat. At that time I wore cut-offs, a tank top, and flip-flops. I had sun glasses on, so maybe that qualifies as safety glasses. Now that I've done some research, I wouldn't dream of painting the bottom without safety equipment. This is some nasty, toxic stuff! Yes, safety gear is uncomfortable, awkward, and dorky looking--use it anyway!

Bottom Paint Procedure

1.Tape



2. Gather materials: safety gear, paint, drill motor and stirring attachment, paint roller on long handle.

3. Don safety gear: disposable painting jumpsuit, gloves, waterproof shoes, head covering, safety goggles (not glasses, these need to be closed in all around), and respirator. Don't even bother with a dust mask for this job. A mask does not keep you from breathing volatile, toxic, carcinogenic, organic compounds--such as the fumes from bottom paint.

4. Stir paint. Use an attachment on a drill motor, not a stick. You http://www.zillow.com/marina-ca/ really need to stir the paint well.

5. Dip your roller in the paint can rather than pouring the paint in a pan. Yep, that's what the pros do. Just dip, try to distribute the paint somewhat evenly on the roller, and roll. Yes, it's extremely messy. That's one of the reasons you're wearing safety gear. Dip and roll, dip https://storify.com/marinawareham/finding-the-best-mooring-service-marina-wareham-bo and roll--quick and dirty. Use a brush if you have to on areas you can't fit a roller into. I had to use a brush behind the keel cooler.

6. When the boat was picked up by the travel lift, we ran over and painted the bottom of the keel and the areas covered by the supports. That's a common boatyard practice; just be sure the crew knows you're there first.

http://lee-b.hubpages.com/hub/Living-aboard-Argonaut-II-In-the-Boatyard

Acquisition 3 wooden boats are 60 feet off their motors and 3 engines.


Contract awarded for acquisition 3 wooden boats are 60 feet off

their motors and 3 engines embr pump water ringed hose 3 inches boatsandoutboards and

includes 30 tubes of 315 psi pvc

Wooden boat 60 feet,engine water pump 7hp with 3 diameter,outboard

motors for 60 foot https://www.facebook.com/marinaissad boat



Contract amount: Q535,740.00





Contract date: 22.abril.2014 Hora:11:03:52 p.m.



Contractor name : LOPEZ,GARCIA,,MANUEL,EDUARDO



Contractor address : Aldea las lisas null z.0



Agency : Cooperativa integral de pesca, solimar, r.l.,



Aldea las lisas null z.0



Tel: 55176244



Email: samuelcontador@hotmail.es





country :Guatemala



2014 Al Bawaba (Albawaba.com) Provided by Syndigate.info , an

Albawaba.com company



COPYRIGHT 2014 used outboard motors for sale Al Bawaba (Middle East) Ltd.



No portion of this article can be reproduced without the express written permission from the copyright holder.

Copyright 2014 Gale, Cengage Learning. All rights reserved.

http://www.thefreelibrary.com/Acquisition+3+wooden+boats+are+60+feet+off+their+motors+and+3+engines.-a0368184372

How Denmark Saved Its Jews From the Nazis


Denmark was the only European country to save almost all of its Jewish residents from the Holocaust. After being tipped off about imminent roundups by prominent Nazis, resisters evacuated the country's 7,000 Jews to Sweden by boat. A new book examines this historical anomaly.



They left at night, thousands of Jewish families, setting out by car, bicycle, streetcar or train. They left the Danish cities they had long called home and fled to the countryside, which was unfamiliar to many of them. Along the way, they found shelter in the homes of friends or business partners, squatted in abandoned summer homes or spent the night with hospitable farmers. "We came across kind and good people, but they had no idea about what was happening at the time," writes Poul Hannover, one of the refugees, about those dark days in which humanity triumphed.



At some point, however, the refugees no longer knew what to do next. Where would they be safe? How were the Nazis attempting to find them? There was no refugee center, no leadership, no organization and exasperatingly little reliable information. But what did exist was the art of improvisation and the helpfulness of many Danes, who now had a chance to prove themselves.

Members of the Danish underground movement emerged who could tell the Jews who was to be trusted. There were police officers who not only looked the other way when the refugees turned up in groups, but also warned them about Nazi checkpoints. And there were skippers who were willing to take the refugees across the Baltic Sea to Sweden in their fishing cutters, boats and sailboats.

A Small Country With a Big Heart

Denmark in October 1943 was a boats for sale small country with a big heart. It had been under Nazi occupation for three-and-a-half years. And although Denmark was too small to have defended itself militarily, it also refused to be subjugated by the Nazis. The Danes negotiated a privileged status that even enabled them to retain their own government. They assessed their options realistically, but they also set limits http://www.ci.marina.ca.us/index.aspx?NID=17 on how far they were willing to go to cooperate with the Germans.

The small country defended its democracy, while Germany, a large, warmongering country under Hitler, was satisfied with controlling the country from afar and, from then on, viewed Denmark as a "model protectorate." That was the situation until the summer of 1943, when strikes and acts of sabotage began to cause unrest. This prompted the Germans to threaten Denmark http://directory.iboats.com/Marinas_and_Boat_Storage/ with court martials and, in late August, to declare martial law. The Danish government resigned in protest.

At this point, the deportation and murder of European Jews had already been underway for some time in other countries that had submitted to Nazi control. In the Netherlands, Hungary, Greece, Lithuania, Latvia and Poland, the overwhelming majority of Jews, between 70 and 90 percent of the Jewish population, disappeared and were murdered. The Nazis deported and killed close to half of all Jews in Estonia, Belgium, Norway and Romania. About a fifth of French and Italian Jews died. As historian Peter Longerich writes, the Holocaust was dependent, "to a considerable extent, on the practical cooperation and support of an occupied country or territory."

http://abcnews.go.com/International/denmark-saved-jews-nazis/story?id=20750027

The Fastest Racing Yacht Ever?


A controversial new breed of yachtsman is fighting both on the seas and in the courts to win the America's Cup, whose trophy was named for the legendary yacht that won a famous race back in 1851. Jerry Bowen takes us on a high-speed ride on a high-tech yacht in pursuit of bringing the cup back to America.

The America's Cup is not for the meek or humble. It's a high-stakes, high seas race that requires big money, and even bigger egos.

In the late '70s, media mogul Ted Turner was such a man. He captured the prize with his yacht Courageous, and earned the nickname "Captain Outrageous" for his attitude - and his under the table / over the top drunken celebration.

From its beginning 157 years ago, the race for the cup has always been colorful, if not controversial.

In 1983 when the Americans lost the cup for the first time ever, the Yanks complained that the victorious Australian boat had an advantage, a secret keel that made it faster.

The Aussies kept the cup, and the keel controversy became part of racing lore ... the "do anything" attitude to get a competitive edge, says America's Cup historian John Rousmaniere.

And the gentlemen are at it again.

If horse racing is the sport of kings, then this is the sport of billionaires, spending tens of millions of dollars on a fast boat to capture the oldest trophy around, the America's Cup.

A sea battle between land-locked Switzerland, the current holder of the cup with its winning yacht Alinghi and San Francisco's Golden Gate Yacht Club, led by an American original who desperately wants the cup back.

His name is Larry Ellison. And Larry Ellison hates to lose:

"Well, we built the sailboat to go as fast as we know how to make a sailboat go," he said, speaking of his hydrofoil trimaran. "She'll go about three times faster than the wind speed."

There has never been anything like it. We took a look during its initial sea trials off of San Diego last month, and its profile is massive.



(AP/BMW Oracle, Gilles Martin-Raget)

The mainsail is twice as large as a Boeing 747 wing ... its mast as tall as a 16-story building ... the footprint, 90 feet by 90 feet - the size of a baseball infield.

"I've got a Bugatti, which is the fastest car in the world. And it's astonishingly fast, you know? It goes over 250 miles an hour," Ellison said. "But it's nothing like driving this boat."

Ellison can easily afford Bugattis, big boats, and monstrously big houses. He co-founded software giant Oracle and is one of the richest men in the world, worth billions.

His primary home in Northern California cost $200 million. And the boat he's built to challenge the Swiss, a joint project with automaker BMW, has cost upwards of $20 million.

So far.

Jim Spithill is the helmsman, the boat's driver. Bowen asked, does he know yet how fast the http://www.eteamz.com/marinawarehamboatyard/news/index.cfm?id=5839484&cat=0&SitePage= boat can go?

"No, we don't," Spithill said. "But certainly up towards, you know, 40 knots. On purpose, we're taking things very slowly and very conservatively. I mean, who knows? We could have a serious crack at a speed record."

To http://marinahomeinteriors.com/ keep the boat light, there is netting instead of flooring. To reduce drag there are three light hulls instead of a traditional single heavy one. But each innovation brings new dangers:

"This boat, you make a mistake, it's catastrophic," Spithill said. "You tip over, you know, people are gonna be killed. It will hurt badly. And that's 'cause of the speed you're traveling and the fact that a boat like this, once it flips over, it's done."



Caution is not thrown to the wind.

For safety, one chase boat follows with a diver and doctor.

There's a second chase boat loaded with computers that monitors the boat's performance like a high speed athlete in training, crunching data sent from the yacht's many sensors.

On this day the wind was 20 knots (about 23 miles an hour). And the yacht was doing 30 knots (nearly 35 miles an hour).

Bowen, in a chase boat with two motors of 600 hp, found that even in a light wind, he could barely keep up.

And there's still another boat in the chase, not for racing but for ... spying, carrying men with cameras and binoculars. They're not-so-secret agents working for Alinghi, the Swiss team which holds the cup. They're trying to figure out what makes the American boat sail so fast.

"I can't imagine another sport on the face of the Earth that has that kind of intrigue for a writer like me," said author Joseph Wambaugh, best-known for his mystery and non-fiction books about cops. His 1996 novel "Floaters" is based on an earlier America's Cup race held off San Diego:

"It has spies, it has security, it has espionage," he said.

And it's all part of the game, says Russell Coutts, skipper of the American yacht.

"You know, it's a little bit like a dog fight," he said.

"There's some obvious things that somebody looking from the outside can pick up and, you know, learn. But the reality is there's nothing like sailing the real boat."

And New Zealand native Coutts is considered to be the http://marinawarehamboatyard.blogspot.com/2015/01/discovering-best-mooring-service-marina.html best. In fact he was the skipper of the Swiss boat when it first won the America's Cup.

And when Coutts and the Swiss had a bitter parting of the ways, Larry Ellison snapped him up for the U.S. team ... no surprise to author Wambaugh.

"This is a rich man's game I call a blood sport," he said.

And the blood is being spilled in court.

After Alinghi won the America's Cup for the second straight time in 2007, Ellison sued to become the sole legitimate challenger. The case, being heard in New York State, is on appeal. Arguments are scheduled for early next year

Bowen commented that when Ellison talks about his boat, he has a twinkle in his eye. "I mean, you're having fun."

"It's been a very interesting project to build this thing," Ellison said. "To build something that goes this fast. And it's even more fun to sail. So now, we got to get it out onto the water against Alinghi and see if she is what we think she is, which is the fastest sailboat that's ever been built."

Fastest perhaps ... but that doesn't mean it will ever make it to the America's Cup starting line.

Ellison and his novel yacht have just taken a shot across all three of its bows.

The Swiss and at least 16 other nations have announced they're going ahead with the next America's Cup regatta no matter how the American billionaire does in court.

After all his maneuvering and all the money he's spent, Ellison and his fast boat could still end up in the dry dock of nautical history - a very expensive footnote in the story of this long-running gentlemen's sport.

For more info:

Alinghi: Defender of the 33rd America's Cup

America's Cup

BMW Oracle 90

Jobson Sailing

"A Picture History of the America's Cup" by John Rousmaniere

The Seamen's Church Institute

Copyright 2008 CBS. All rights reserved.

http://www.cbsnews.com/news/the-fastest-racing-yacht-ever/

Mercruiser Engine Parts Revealed


The Mercruiser engine is an advanced marine propulsion method and is accessible in recreational and commercial vehicles ranging from 1.5-liter displacement to 14.-liter displacements. They are generally two stroke diesel motor cars and are termed as inboards or stern drives depending for the automobile layout and design.

Mercury Marine was founded within the late 1930's, and mercury outboard parts inside of the 1960's merged with its recent mother organization, the Brunswick Corporation. Today, the organization continues to be noted for its selection of vessel engines and water propulsion equipment.

Even though the Brunswick Corporation also generates fishing boat engines via its other subsidiary, the Brunswick Vessel Group, Mercury Marine could well be the specialist for smaller boats that depend on outboard, inboard and sterndrive propulsion systems. The Brunswick Boat Group, inside of the other hand, specializes in greater vessels like yachts and other pleasure boats.

That's why it comes as no surprise that quite a few for the world's boaters look to Mercury Sea. The company's Mercruiser line of engines and sterndrives has led the market mainly because it was launched 45 years ago. Even now, the corporation remains among one of the most common names inside the industry simply because of its decades of offering outstanding boating gear to fans all around the earth.

You can discover a quantity of http://www.zillow.com/marina-ca/ organizations that deliver Mercruiser boat parts, for enthusiasts who strive to keep their gear in top shape. A single certain doable avenue to explore when browsing for these vessel components is as a result of the world wide web, by way of community forums and web sites that characteristic motorboat pieces sold at wholesale rates.

The Mercruiser engine parts contain the following major pieces.



The Mercruiser Power plant:

They're the heart of any cars or moving vehicles and are readily available in 4, 6 or 8 cylinders capacities, particularly for stern drives. The engine rating and displacement or fuel technique are also essential for a unique purpose motorboat. These can be the substantial Mercruiser pieces and each engine contains a tag specifying specifics on the motor.

The Carburetor:

Carburetor is connected for the power delivery program and filters and regulates the supply of fuel for the motor. The carburetor is generally identified by its style and design (filtering and regulating power) or matching its pattern from the catalogue or handbook provided with the boat.

The Manual Exhaust:

These Mercruiser sections are utilized for removing combustion gases from engine by way of exhaust manifold. These are connected towards exhaust method.

H2o and Fuel Pumps:

Raw h2o pumps or circulating water pumps are utilised for cooling outboard engines by continuously circulating h2o. These pumps are supplied with total instructions and can be changed effortlessly. Fuel pumps are little nozzles by way of which power, which is commonly diesel, is injected towards engine.

Marine Mufflers:

They are the silencers created from fiberglass and are created for backpressure compensation and resistant from corrosion. They are in cylindrical shape from distinct diameter of 1.5" to 12" inlet and outlet. These are appropriate for below waterline installation and can quickly be replaced.

Fresh h2o Program:

These will be the complete pump and pipe program for circulating fresh h2o employed for cooling 2 stroke outboard engines. These systems are http://bulbapedia.bulbagarden.net/wiki/Marina_(Johto) accessible with full guidelines and can swiftly be transformed.

Oil Coolers:

These could be the cylindrical coolers utilised for cooling oil and these are usually readily readily available in different sizes from 5" * 1" to 12" * 1.25" and occasionally two cylinders attached together are furnished as dual coolers.

Engine and Gear Lube:

Service manual gives the comprehensive instruction to change motor and gear oil at specific interval and the oil must be altered as per the direction given in handbook.

Some other important mercruiser factors consist of electrical process; power steering, couplers and stern drive sections.

Identifying the mercruiser elements:

A tag is connected to identify powerplant style, serial variety of powerplant, transcom assembly serial quantity and drive serial quantity. Similarly for inboard transmission, style and serial numbers are offered on a tag on the top or side of transmission. You ought to verify the tag facts towards handbook furnished to you by the maker and both the facts must match.

Once you've located the correct model quantity with specified transmission details, you must see the factors facts as figure of just about each and every component may perhaps be furnished. You really need to identify the figure from catalogue or guide provided for you or you must check out the net site while using the producer. The moment the components corresponding to the figure continue to be identified, you have to note down the serial number supplied inside the catalogue or world wide web web page. Once you're able to locate the exact part amount and corresponding serial range, it's easy for you personally to purchase these sections directly from manufacturer or resellers.

The Mercury Mercruiser, known by most as "#1 about the water," is one from the most well-liked sterndriver engines you possibly can buy. But, due to its popularity, persons will come out with the woodwork wanting to sell you mercruiser elements when a thing goes erroneous. And, as everybody knows, in terms of engines something will sooner or later go inappropriate. Issues break down, quit operating, stop performing what they ought to. When this takes place, it's up to you to fix whatever may perhaps possibly be incorrect while making use of boat - whether or not you know specifically how you possibly can deal while using the difficulty, or not. Though you may possibly be considered a boat lover, this does not necessarily make you a boat mechanic. Sterndriver engines along while using the pieces that go into them might be quite complicated. Replacing them could possibly be a hassle and a headache, in certain inside the event you aren't specific about what you're performing.

Maintenance, Replacement, and Repair

Wherever do you begin out? If you desire to uncover essentially the most beneficial provide and still obtain the top quality elements you may well have to have, you could waste a lot of time calling distinct shops, driving close to, and wading via the mind-boggling data it's possible to uncover around the World-wide-web. To simplify your lookup, take a very good look at your owner's handbook ahead of you do a thing else. The owner's manual will tell you most anything you'll would like to know about your Mercury Mercruiser, including guidelines and suggestions on appropriate servicing. An informed determination is normally the correct choice.

http://www.articlesnatch.com/Article/Mercruiser-Engine-Parts-Revealed/1346223

More crowds & big fun at MBIAs 2nd Annual Boating & Outdoor Festival - Detroit Recreation


As beautiful fallish weather enveloped Metropolitan Beach in Harrison Township along the shores of our spectcular Lake St. Clair for the final two days of the Michigan Boating Industries Association 2nd Annual Boating Outdoor Festival, the people came out in droves to experience it all personally.

Just chilling is what Mark and Jody Mordarski said they were doing on this beautiful day at the Boat Show when we caught up with them.

Teri Landis

The boats, both sail and power, boat hoists, lifts, and portable docks, canvas and sail makers, boat dealers and marina operators, food vendors, artists of all kinds, ATVs, two and three wheelers, canoes and kayaks, the Kids Zone, Dora the Explorer, the Cadillacs, the Can-Am race course, the Sea-Doo test drives, the Jimmy Buffett style music emanating from the Tiki Bar, all combined to make for another successful MBIA event.

This was the general concensus of everyone we encountered, including Jay Cooper of St. Clair Yacht Sales in Kean's Marina on the Detroit River. "The last couple of days have been great. We have sold most of our boats, along with some spots in the Marina. Our improvements are bringing them in, as it's a family resort." He chuckled as we chatted about the inclement weather on Friday at the Show. "The first boat we sold was in the rain! It's been a very good show."

"The MBIA does a very nice job on these shows," says Chuck Baumgarten of KBE Hoist in New Baltomore.. "And we'll continue to exhibit as long as they are producing these shows." Baumgarten goes on to explain that, "There isn't a boat here that I can't provide a hoist to lift it." As the builder and manufacturer of their own steel hoists, with http://marinahomeinteriors.com/ their own product line, that can be customized from 3,000 to 65,000 pounds, he feels KBE has the market covered. "Right now we are completing a 60,000 pound hoist at Gregory Marine."

The folks at O'Keefe's Reef from Irons, Michigan have their own product line, too, of shirts, hats, shorts and sweat pants and more, with their own particular sayings. We chatted for a few moments with Dan Belman, whose wife, Sally does all of the embroidery on their attire. He laughed as he shared that, "We have the world record fish (that have been caught) on tees." Definitely a plus for a Show held in an area which boasts of World Class Fishing, per Byron Kahlia of Jimmy's Boats Baits.

And once you have to take your boats out of the water, the folks at First Mate Marine Service in Harrison Township, Ron Jill Fulgenzi, will be happy to be of assistance. Jill also let us know that, "If you schedule winterizations and shrink wraps before October 15, there are discounts available. And mechanical work over the winter, from December 1 through March 31, cuts the labor rate considerably."

Perhaps another winter consideration yacht for your boat is the canvas. Dockside Canvas Company is "one of the biggest in North America," according to Lynn Hodell. She's been with them for 13 years and shares that, "It's a great team!" They also are able to do awnings and upholstry, and are local in Harrison Township.

Another local Harrison Township business is MacRay Harbor. Jerry Glendening, Member Services Sales Coordinator, took a moment to explain some of the services provided. One of the things that caught our http://www.babynamewizard.com/baby-name/girl/marina attention was the Rendezvous Cruises. A group of boaters goes on an excursion, and the excursion includes a boat with an official Captain. In that way, everyone can come along, even new boaters, and enjoy trips they may not normally take without years of exprience. "We are looking to connect with Commanders and Commodores of various organizations to spread the word."

Interestingly, Bob Krieg, Sr., Commander of the St. Clair Shores Sail and Power Squadron walked up at that moment. Jerry had the package in hand, and passed it right along to Bob, who was on his way to the United States Power Squadron booth. The USPS is a boating safety organization, which holds classes from Basic Boating up through Celestial Navigation. If you have ever considered shooting the stars, then the USPS is the place to get started.

If you get started in Pedego Junction, then you definitely have a jump on the competition. Pedego Junction, another local Harrison Township business, is the place to go for an electric bike. Gregory "Panama" Krzeminski explains that, "The bikes plug into a wall outlet and you can travel 20 miles without peddling." And for the technicalities,"There is a 36 volt lithium polymer battery and a 500 watt brushless rear hub motor. They have front disc brakes, 12 gauge spokes, and a one year warranty, along with a three year warranty on the battery."

He continued on saying, "You can ride them like a normal bike (pedal them) and the company stands 100% behind our customers. Our motto is Hello Fun!"

In that vein, we ran across Ray Underwood, who was promoting the Boaters' Association of Michigan, a group affiliated with the MBIA. When asked to say a few words, Ray simply smiled with twinkling eyes and said, "Happiness is boating!"

Brian Kelly with Sun Sport Marine, which is located in the Sun Dog Marina, also in Harrison Tonwship, was definitely happy to show us around a beautiful Chaparral boat. "The Chapparals are made in Georgia. We also sell Formulas which are made in Indiana." Continuing he told us he was taking classes in Storm Water Management and was additionally involved in composting and helping others to get involved, too.

Getting involved was what happened at the Advantage Foods booth when the crowd started to smell their wood fired stove, in which they were making pizza, with dough they homemade. The aroma filled the air and the folks went in and checked out their ribs, sausage, burgers and fries, too, and walked out with big smiles on their faces.

Julie Champion, Supervising Interpreter (formerly known as a Naturalist) at Metropolitan Beach had a huge smile on her face as she spoke about the programs and activities available at Metro Beach, as the locals call it. She talked about the Kids Day to Get Out and Play and the newly "opened" Lake St. Clair Coastal Water Trail Paddling Routes.

The Coastal Water Trail includes highlights for launch sites, landings/ports-of-refuge, landings/marina amenities, channel markers, public parks/waterfront, marina districts, urban centers, historical/natural features, and caution notations for high volume, motorized boat traffic. The trail runs in Macomb County from the foot of Eight Mile north along the shoreline curving into Anchor Bay to the St. John's Marsh, where you can connect up with the St. Clair River Water Trail, and. across to the St. Clair Flats. There are also some notations south of the Macomb County Line, down to the Detroit River.

"This is all wonderful as there is so much more for the kids and families to do," Julie commented.

More to do at Metropolitan Beach is on the list of Thomas Knuth, Park Operations Manager. "This has been a great show and we are already making plans for next year. It is rewarding to work with the MBIA as they promote boating in Michigan and they represent their membership."

Representing the membership, if you will, of the ATV riders was Chris McPeek of K W Cycle. K W is located in Utica, was established in 1963 and their motto is "We love to ride!" As a Can-Am and mercury marine Sea-Doo dealer, along with seven others, Chris explains, "We did good at the Show. We sold some units and all of the test rides were great! There was a great turn out and it was definitely worth coming."

Jeff Henderson of Harrison Marine, Inc. in Harrison Township spoke about the turn out saying that "Thursday and Friday the turn out was affected by the weather. Saturday and Sunday made up for it." He continued on saying that he felt "The MBIA is the best thing that has happened in Southeast Michigan."

Harrison Marine, Inc is a Repossessed Boat Sales Outlet and Jeff shared that he gets bids on about 200 to 300 boats a year. Having seen an article in the New York Times about Jeff and his business, with a picture, we chatted about it for a moment. He laughed as he said he had been featured in an article in a Toyko newspaper, too. Words gets around.

The word has gotten around about the Michign Boating Industries Association taking over the operation of the Boating and Outdoor Festival. And per Pete Beauregard, Jr., Owner of Colony Marine Sales located in St. Clair Shores, "This is the best attendance in the last ten years. It's a very good show and the weather cooperated on the weekend. There were a lot of new poeple who were sincerely interested and we did some business. We have demo rides scheduled for after the show with some serious folks and it all starts there. The first step was fantastic. The MBIA has made a difference selling a life style and it is a real smart move."

With that thought, we moved toward the Show's exit. On the way out, we ran into the folks from Wilson Marine, who told us, "We are happy." And, we think we heard something about a hot tub on the agenda, too.

Steve Remias of MacRay Harbor, along with his agenda, as this year's Chairman of the MBIA, was definitely smiling. "It was a very good Show from all that I've heard from everyone," he remarked as he headed into the MBIA Office.

The immediate Past Chairman of the MBIA, Eric Foster of Belle Maer Harbor, also crossed our path. Eric tells us, "The Show ended with great weather. It has been a great two days (as the weather had improved). We are very happy and we are getting very positive feedback. With lots of boats in the water, the BRP Ultimate Playground, and Artists Alley, to name a few things, we are continuing to grow and we are looking forward to an even better Show next year."



The last of the very positive feedback, as we headed toward the car, came from the RSIG Security folks who reported that it was a great show. Very good news there, too.

"Kudos all around" to everyone involved for a fabulous 2nd Annual Boating and Outdoor Festival.

http://www.examiner.com/article/more-crowds-big-fun-at-mbias-2nd-annual-boating-outdoor-festival

WALES: End of an era for Dickies; EXCLUSIVE HISTORIC BOATYARD ON THE MOVE.


Byline: By ROLAND HUGHES



AN historic boatyard is to move after more than 80 years to make

way for a major development.



Dickies Boatyard has stood on the edge of the Menai Strait in

Bangor since 1924 and is a landmark of the city.



But the Daily Post can exclusively reveal the site has been sold to

one of North Wales' most prominent developers.



The boatyard, known around the world, is now expected to relocate to the far side of the bay in Bangor to Port Penrhyn.



Boat owners have been told this is the last winter their vessels

will be kept at the current Dickies site.



Owner Peter Dickie confirmed the business was likely to move by

late summer next year, and that he was in negotiations over a new

permanent site.



A spokeswoman for Watkin Jones and Son last night said: "We

can confirm we have bought Dickies boatyard as a commercial

investment."



The spokeswoman said the company could not elaborate further on any

proposals they may have for the site.



The Daily Post has, however, learnt the plans are not for a marina,

with talks continuing to establish boatsandoutboards a marina elsewhere in Hirael Bay.



Mr Dickie said: "We have agreed http://www.urbandictionary.com/define.php?term=marina a contract with Watkin Jones,

and will continue on this site for some considerable time yet.



"We are in negotiation with (Port Penrhyn owners) Penrhyn

Estates to utilise vacant facilities at Port Penrhyn.



"All the activities we have here will transfer to Port

Penrhyn, not perhaps in the same format we have here."



A M Dickie Sons was founded in Scotland in 1868 by Mr

Dickie's great-great grandfather http://www.parks.ca.gov/?page_id=10915 to make fishing boats.



It relocated to Bangor in 1924, taking over an existing boatyard,

and established its reputation as a boat builder, repairer, engineering

business, chandler and broker.



Since Peter Dickie joined the company in 1971, Dickies dealerships

have opened up in Brighton, Pwllheli, Southampton, Newcastle, Plymouth

and Swansea. Another branch in Gibraltar closed.



Mr Dickie said: "Barring the emotional aspect of leaving this

site, this is all being done to further the business.



"We have to focus on putting Bangor on a strong footing and

address the future needs of the market."



Hugh Davis, a trustee of Penrhyn Estates said: "This can be

only a good thing for the area and Bangor. If Dickies' jobs are

kept, and their site is developed, it will increase the appeal of the

area to everyone."



Watkin Jones and Son also recently bought the former bus depot

site.



140 YEARS OF HISTORY



AM Dickie Sons was setup in Scotland in 18 68bycurrentowner

Peter Dickie's great-great grandfather



Peter Dickie's grandfather moved the business to Bangor in

1924, on a corner of its current site



Over the next few decades, it expanded after taking over

neighbouring sites and the reclamation of land

There is now room for around 260boats in the yard. It attracts

business from all over the world



Other Dickies' dealerships are based in Pwllheli, Swansea,

Brighton, Southampton, Newcastle and Plymouth



rolandhughes@dailypost.co.uk



CAPTION(S):



Dickies boatyard is moving from its home of 80 years in Hirael Bay,

Bangor after the site was sold to developer Watkin Jones and Son;

Dickies has been in Bangor since 1924



http://www.thefreelibrary.com/WALES:+End+of+an+era+for+Dickies%3B+EXCLUSIVE+HISTORIC+BOATYARD+ON+THE...-a0169948066

Semi-solid casting process shows muscle for Mercury Marine.


Inside This Story:

* Diecasting is a popular process for casting aluminum components

due to its high-volume production capabilities at a low cost, but that

does not mean the process is perfect.

* Semi-solid metalcasting (SSM) is an alternative to diecasting

that produces castings with improved material properties, but at higher

costs.

* Slurry-on-demand, a new SSM process, is capable of producing

parts with the material properties associated with SSM at costs similar

to mercury marine diecasting.

When a company wants aluminum cast components fast and at low cost,

high-pressure diecasting often is the chosen process. But, one of the

main drawbacks to diecasting is http://animalcrossing.wikia.com/wiki/Marina the amount of volumetric shrinkage that

can occur, which causes internal porosity and, subsequently, weaker

castings. During the solidification process of die castings, 6%

volumetric shrinkage occurs. In heavy cross-sections or isolated areas,

the amount of porosity or shrinkage that results can be several times

more severe.

A new process has emerged as an enhancement to diecasting and

permanent mold casting for applications requiring higher mechanical

properties. It promises to decrease shrinkage and cycle times, save

money and improve the mechanical properties of the aluminum castings.

This process, termed slurry-on-demand, is a derivation of the semi-solid

metalcasting (SSM) process, which was introduced to the industry 20

years ago as a way to utilize the high-production speeds of diecasting

while maintaining the mechanical properties of permanent mold.

Often referred to as thixocasting, semi-solid metalcasting

traditionally utilizes a metal ingot that is heated through several

temperature stages in induction coils until it reaches a 50-50

liquid-to-solid ratio. With a 50% solid base, the SSM charge, once

plunged into the die to form the casting, requires the removal of less

heat to solidify, and thus, less time to cool, resulting in less

shrinkage after casting. But, similar to high-pressure diecasting,

thixocasting has its limits.

One major disadvantage of thixocasting is the size limits for

casting due to the small nature of the billets. Billets (in the

semi-solid state) can be made to dimensions no more than 3 x 4 x 4 in.

(7.62 x 10.16 x 10.16 cm)--any bigger and they collapse under their own

weight. This allows the thixocasting process to work well for parts less

than 15 http://www.imdb.com/title/tt0928097/ lbs. (6.8 kg), but diecasting is required for anything larger.

It also was found that the induction heating process of the billet

sometimes could cause problems. For example, Mercury Marine, Fond du

Lac, Wis., was developing a swivel arm bracket (Fig. 1) using the

thixocasting process when it discovered that castings had a low impact

strength.

[FIGURE 1 OMITTED]

It was found that when the casting temperature was lower than

required in one of the billet induction coils, "knit" lines

subsequently occurred in the cast component, resulting in low impact

strength. Knit lines are formed when two divergent semi-solid metal flow

fronts do not recombine completely. But if the casting temperature was

too high, about 15% of the billets "slumped" in their

induction coils because they were not solid enough to maintain their

form, and therefore, had to be scrapped. The unreliability of the billet

heating took away from the time saved due to a quicker cooling process.

Building Strength

Slurry-on-demand eliminates the need for induction heating of

billets. Instead, molten metal is ladled out of the same type of furnace

used in diecasting and poured into a crucible. As the metal cools in the

crucible, a magnetic stator stirs the melt, preventing dendritic growth

in the slurry. Rather, the nuclei formed in the melt have a round

structure and make up the 50% that is solid. The liquid eutectic phase

comprises the other 50% of the semi-solid slurry. A robot then picks up

the gelatinous metal and takes it to the shot chamber, where it is

plunged (at a slower speed than with diecasting) into the cold die.



The slurry-on-demand process supplies four main benefits for

aluminum castings:

Quicker Cycle Times--Cycle times hinge on waiting for the 100%

liquid metal to cool. This can be a prolonged period of time considering

the amount of superheat and heat of solidification that must be

extracted during the shot cycle. With slurry-on-demand, rather than wait

for 100% of the metal to cool to a solid, the metal solution is already

half-way to its solid form. Less heat input means cycle times can be

significantly reduced.

Reduced Shrinkage--Molten aluminum boat motors shrinks 6% as it solidifies

through the liquidus and solidus phases and down to room temperature. In

slurry-on-demand, less molten aluminum needs to solidify, reducing

shrink to 2%, so castings have less porosity, greater strength and

greater ductility with slurry-on-demand.

Longer Die Life--Because molten metal must cool in order to achieve

solid state, a 50-50 slurry solution is cooler than completely molten

metal. Because of the lower temperature, the metal in the slurry does

not solder, or alloy, with the metal of the die, which can happen in

diecasting. The lower temperature also reduces the amount of thermal

fatigue seen by the die. Both of these benefits significantly increase

die life over diecasting.

Improved Mechanical Properties--The aluminum alloy used in

diecasting typically contains iron in order to prevent soldering with

the steel in the die tooling. However, adding iron significantly reduces

the mechanical properties of the aluminum. Slurry-on-demand, due to its

lower temperature, does not require the added iron to prevent die

soldering, so the aluminum maintains higher mechanical properties

compared to alloys in the permanent mold casting process.

Mercury Marine has used the process to cast a wide range of parts

from thin-walled propellers to a 27-lb. (12.25-kg) four-cylinder engine

block. In addition, Mercury currently is using slurry-on-demand to cast

a 7-lb. (3.18-kg) swivel bracket. In all of these components, Mercury

Marine has seen significant reductions in cycle times and improvements

in material properties.

Slight modifications are required to existing die casting equipment

to incorporate slurry-on-demand. The process requires the same type of

furnace and die tooling equipment already present for diecasting, as

well as the slurry maker and a robot to bring the slurry to the shot

chamber (requiring a minimal footprint).



Table 1. Mechanical Property Data of Molding Methods and Alloys



Ultimate

Tensile Yield Elongation

Strength Strength (%)



Slurry-on-demand 314 Mpa 223 Mpa 9.0

356-T6 alloy 45 ksi 32 ksi



Slurry-on-demand 255 Mpa 186 Mpa 8.0

356-T5 alloy 37 ksi 27 ksi



Pressure lost foam 258 Mpa 181 Mpa 6.0

356-T6 alloy 37 ksi 26 ksi



Squeeze casting 300 Mpa 223 Mpa 9.0

356-T6 alloy 43 ksi 32 ksi



Permanent mold 255 Mpa 150 Mpa 5.0

356-T6 alloy 37 ksi 22 ksi



Traditional lost foam 227 Mpa 165 Mpa 3.5

356-T6 alloy 33 ksi 24 ksi



High pressure diecasting 331 Mpa 166 Mpa 1.5

380 alloy 48 ksi 24 ksi

Adam Kopper is a development engineer for Mercury Castings, Fond du

Lac, Wis. Raymond Donhue is senior director of metals and foundry

technology at Mercury, and David Olson is genera/manager of Mercury

Castings. Stephen Midson is president of The Midson Group, Denver.

For More Information

"Continuous Rheoconversion Process for Semi-Solid Slurry

Production, " M. Findon and D. Apelian, 2004 AFS Transactions,

Paper No. 04-055.

"Semi-Solid Processing of Hypereutectic Alloys," D. Saha,

D. Apelian, and R. DasGupta, 2004 AFS Transactions, Paper No. 04-057

http://www.thefreelibrary.com/Semi-solid+casting+process+shows+muscle+for+Mercury+Marine.-a0133082135

boat sales and trades? | Yahoo Answers


Report Abuse

Additional Details

If you believe your intellectual property has been infringed and would like http://marinas.com/ to file a complaint, please see our Copyright/IP Policy

Report Abuse

Cancel

Report Abuse

Additional Details

If you believe your intellectual property has been infringed and would like to file a complaint, please see our Copyright/IP http://www.ci.marina.ca.us/index.aspx?NID=17 Policy

Report Abuse

Cancel



Report Abuse

Additional Details

If you believe your intellectual property has been infringed and would like to file a complaint, please see our Copyright/IP Policy



Report Abuse

Cancel

http://www.wattpad.com/95050429-finding-the-best-mooring-service-marina-wareham href=""> href='https://answers.yahoo.com/question/index?qid=20150404182501AAPegPB'>https://answers.yahoo.com/question/index?qid=20150404182501AAPegPB

Have Fun in the Sun without Fear of Skin Cancer by Marina Capangan


Have you ever spent much time having fun in the sun trying to get a deep and dark looking tan? Although the sun is beneficial to some extent as in increasing energy and metabolism, guarding off depression, and promoting immunity to prevent diseases, it also poses some detrimental risks that may outweigh the benefits. Learn how to protect yourself from the harmful effects of excessive sun exposure.



The sun has ultraviolet A and B rays.These ultraviolet rays are the main cause of the most common form of skin cancer in the United States and in other parts of the world. Higher incidence of skin cancer is seen in young adults and increases with age. It is also more common in men http://marinafilm.com/ than in women. Other risk factors include a personal history of skin cancer, family members that have been diagnosed, severe sunburns in childhood, fair skin that burns easily, living near the equator or in high altitude, having 50 moles or more, sun bathing, and the use of tanning beds. Skin cancer can be prevented by taking these sensible precautions:

o Limit the sun exposure during its peak hours of ultraviolet radiation from 10 a.m. to 4 p.m.

o Since sunscreens dont offer a complete protection from the ultraviolet rays of the sun, it is advisable to wear protective clothing such as a wide-brimmed hat to protect the face and neck.

o Wear dark clothing since it absorbs ultraviolet rays.

o Wear long sleeves that cover the arms and legs.

o Use sunscreen with a sun protection factor of at least 30 or http://www.youtube.com/watch?v=0wXiJgCRH4Y higher on both cloudy and sunny days. The sun still has invisible ultraviolet rays even if the sky is overcast. Sunscreen with a higher number of sun protection factor on the label also offers a higher sun protection. The sunscreen should block both ultraviolet A B radiation. Apply the sunscreen liberally to all exposed areas http://www.dailymile.com/people/brentwpeterson/entries/31579717 including the ears, forearms, hands, and neck.

o Remember to wear sunglasses.

o Remember that surfaces such as the sand, snow, or water can reflect the suns rays.

o Avoid sun lamps and tanning areas since it has an artificial ultraviolet A radiation.

o Children have sensitive skin and are vulnerable to sunburn and they should be protected as well. They should wear clothing and hats to protect their skin from the harmful rays of the sun and therefore avoid the risk of getting skin cancer.

Having recreational sun exposure is fun to people who enjoy outdoors. Be aware that the sun can damage your skin even on cloudy days and be sure to stay in the shade during the peak hours. Finally, remember to wear a wide-brimmed hat and sunglasses with ultraviolet A and B blocking properties to protect your eyes.



http://www.articlecity.com/articles/health/article_12269.shtml

Warner Bros. Online Delivers Tidal Wave of Support for Warner Bros. Pictures' 'The Perfect Storm' With World Premiere Webcast June 26 And eBay to Host Auction of Historic Boat June 28.


BURBANK, Calif., June 23 /PRNewswire/ --

Warner Bros. Online (www.warnerbros.com) will host two exciting

exclusive Internet events tied to the release of Warner Bros.

Pictures' "The Perfect Storm" -- a live streaming Webcast

of the movie's world premiere and the sale on eBay of the

film's sister boat that was used to depict the actual vessel caught

in the torrential storm, the Andrea Gail. Warner Bros. Online's

Webcast coverage of the premiere begins at 7 PM, PT, Monday, June 26



with the used outboard motors sale on eBay beginning June 28.





"The Perfect Storm" tells of the courageous men and women

who risk their lives every working day, pitting their fishing boats

(including the Andrea Gail) and rescue vessels against the capricious

forces of nature. Their worst fears are realized at sea one fateful

autumn, when they are confronted by three raging weather fronts, which

collide over and forever change the lives of the residents of

Gloucester, Massachusetts and the surrounding communities.



Warner Bros. Online (www.warnerbros.com) will stream exclusive live

coverage of the film's premiere Monday, June 26 at 7:00 PM, PT,

including interviews with the star-studded cast as they make their way

down the red carpet. Following the live Webcast, this exclusive footage

will be available on Warner Bros. Online's Web site throughout the

film's release. On hand for the event will be "The Perfect

Storm's" stars George Clooney, Mark Wahlberg, Diane Lane,

William Fichtner, Karen Allen, Allen Payne, Bob Gunton, Mary Elizabeth

Mastrantonio and John C. Reilly. "The Perfect Storm" opens

nationwide on Friday, June 30.



On Wednesday, June 28, Warner Bros. Online and eBay will promote

and begin the sale of the Lady Grace fishing boat, the sister vessel to

the Andrea Gail and the boat used to depict her in "The Perfect

Storm." The bidding for the boat begins Wednesday, June 28 and

ends Friday, July 7. In addition to the Lady Grace, items offered on

eBay will include wardrobe produced for the film, props used in the film

as well as signed scripts. An exclusive world premiere package

including tickets to the invitation-only screening in Los Angeles,

airfare and accommodations already sold on eBay for $4050. Interested

bidders can go directly to www.ebay.com or www.warnerbrosauction.com.

A portion of the proceeds from the online sale of the Lady Grace

will be donated to The Gloucester Fund, a grassroots organization

comprised of local charities serving Gloucester, Massachusetts and

surrounding communities -- the areas most affected by the storm.



"This storm of 1991 had a huge impact on the residents of

Gloucester, and it is our hope that 'The Perfect Storm' honors

the memories of these local heroes as well as help people understand the

importance of disaster preparedness," said Brad Ball, President,

Domestic Marketing, Warner Bros. Pictures.



Movie fans can find more information by visiting the official

"The Perfect Storm" Web site at www.perfectstorm.com. The

movie site showcases a six-part exclusive presentation of some of the

groundbreaking state-of-the-art visual effects created specifically for

the film by Industrial Light Magic's leading software

designers. It also features an exclusive http://www.imdb.com/title/tt2614860/ Web-only original documentary

about the Gloucester residents who survived the cataclysmic 1991 storm

and the fishermen who continue to navigate the area's dangerous and

unpredictable seas. Additionally, the site offers an interactive

opportunity to tour the deck of the Andrea Gail fishing boat in full

360-degree perspective, as well as view exclusive behind-the-scenes

footage and original production design paintings and photos, interviews

with the cast and filmmakers, and a very graphic visual simulation of

the impact of a 100-foot wave. Users can also obtain facts about storms

and the technology used to study them, Coast Guard footage of a real

rescue at http://vermontmarina.com/ sea and interviews with the rescuers, as well as extensive

profiles on the people, history and culture of Gloucester,

Massachusetts.



Warner Bros. Pictures Presents A Baltimore Spring Creek Pictures

Production In Association with Radiant Productions, A Wolfgang Petersen

Film starring George Clooney and Mark Wahlberg, "The Perfect

Storm." Music is by James Horner. The film is edited by Richard

Francis-Bruce, A.C.E. William Sandell is the Production Designer. John

Seale, ACS, ASC, is the Director of Photography. The Executive

Producers are Barry Levinson and Duncan Henderson. Based on the book by

Sebastian Junger, the screenplay is by Bill Wittliff. Paula Weinstein,

Wolfgang Petersen and Gail Katz produced "The Perfect Storm,"

which is directed by Wolfgang Petersen.



CONTACT: Cathy Dore of Warner Bros. Online, 818-977-8864; or Kari

Dahlquist of Warner Bros. Consumer Products, 818-954-3023; or Kristin

Seuell, 408-558-7431, or Jennifer Chu, 408-558-7432, both of eBay.



http://www.thefreelibrary.com/Warner+Bros.+Online+Delivers+Tidal+Wave+of+Support+for+Warner+Bros....-a062970913

First-time Owners Should Think About Buying Long Island Used Boats


Boating is a dated tradition in Long Island. Chances are if you grew up in the community, exposure to the recreational activity comes at an early age. If you are one of the few residents of Long Island to recently discover boating, and are thinking about buying your first boat, there are a number of details you need to know. Purchasing your first boat will come with more difficulties than you might think. In Long Island, used boats are readily available and are a good option for your first watercraft.

People in the market for their first boat are typically taken aback with the different options available. Lots of people are unaware that used boat sales are in fact on the rise because a growing number of individuals are taking pleasure in the activity. As with every other vehicle, you need to first decide the purpose of the boat before buying one. Will you use it for relaxing sportfishing trips over the weekend with your loved ones or co-workers? Are you going to use it for recreational use and aquatic sports? Answering these inquiries will help you determine which type and model will be suitable for you. This is the very first of several important steps you have to take before buying the water vessel.

For prospective first-time owners in Long Island, used boats are really a more practical option. Firstly, the price tag on one will be considerably less costly compared to a new boat. Bear in mind that watercrafts undergo rigid tests to determine seaworthiness, and a dependable dealership won't ever sell damaged goods. Reduced price aside, an additional advantage of buying a used boat is that the prior owners can attest to the reliability of the vessel. You can use this information to determine the dependability of particular makes and models. You do not need to have the experience to discern which models are good, and which are not.

Prior to buying, get out there and check out all of your options. Browse through websites, and visit the harbour or storage facilities to get a good look at the vessels. Once out there, here is a checklist to review before sealing the sale.



1. Check out the exterior of the used vessel. Due to owner history, most used watercraft in Long Island are usually in top condition. Its physical appearance is a great gauge of its seaworthiness.



2. Of course, you also need to look past the outward appearance. Chances are that you won't be informed about the inner workings and interior of the vessel. Seek the services of an experienced marine mechanic to help you answer and queries you may have. It will also pay to do a bit of research beforehand.

3. Take the boat out for a test drive. You won't purchase a car without taking it out for a spin, right? The exact same logic is applicable boat motors for water vehicles. The most accurate method of finding the vessel's seaworthiness is when it is out on the water.

4. Review the maintenance report. Check http://www.merriam-webster.com/dictionary/marina what repairs have been made, and if there are any substantial problems that may need quick addressing.

Just like any other purchase, buying Long Island used boats comes with risks. Following the above steps can help you avoid running into serious problems.

http://www.articlesnatch.com/blog/First-time-Owners-Should-Think-About-Buying-Long-Island-Used-Boats/3615747

Research and Markets: Yacht Industry - Global Strategic Business Report


DUBLIN--()--Research and Markets (http://www.researchandmarkets.com/research/sqbcs5/yacht_industry)

has announced the addition of the "Yacht

Industry - Global Strategic Business Report"
report to their

offering.

This report analyzes the worldwide markets for Yacht Industry in US$

Million. The report provides separate comprehensive analytics for the

US, Canada, Europe, China, and Rest of World. Annual estimates and

forecasts are provided for the period 2013 through 2020. Also, a

seven-year historic analysis is provided for these markets.

Market data and analytics are derived from primary and secondary

research. Company profiles are primarily based on public domain

information including company URLs.



The report profiles 237 companies including many key and niche players

such as:

Azimut Benetti

Baglietto s.p.a

BENETEAU

Cheoy Lee http://animalcrossing.wikia.com/wiki/Marina Shipyards Limited

Dyna Craft Ltd.

Key Topics Covered:

I. INTRODUCTION, METHODOLOGY PRODUCT DEFINITIONS

Study Reliability and Reporting Limitations

Disclaimers

Data Interpretation Reporting Level

Quantitative Techniques Analytics

Product Definitions and Scope of Study

II. EXECUTIVE SUMMARY

1. INDUSTRY OVERVIEW

2. MARKET TRENDS AND ISSUES

3. INTRODUCTION TO YACHTS

4. PRODUCT INTRODUCTIONS/INNOVATIONS

5. RECENT INDUSTRY ACTIVITY

6. FOCUS ON http://marinawarehamboatyard.blogspot.com/2015/01/discovering-best-mooring-service-marina.html SELECT PLAYERS

7. GLOBAL MARKET PERSPECTIVE

III. MARKET



1. THE UNITED STATES

2. CANADA

3. EUROPE

4. CHINA

5. REST OF WORLD

IV. COMPETITIVE LANDSCAPE

Total Companies Profiled: 237 (including Divisions/Subsidiaries 241)

The United States (35)

Canada (4)

Japan (1)

Europe (149)

France (17)

Germany (9)

The United Kingdom (7)

Italy (47)

Spain (5)

Rest of Europe (64)

Asia-Pacific (Excluding Japan) (38)

Latin America (6)

Africa (4)

Middle East (4)

For more information visit http://www.researchandmarkets.com/research/sqbcs5/yacht_industry

http://www.businesswire.com/news/home/20140813005954/en/Research-Markets-Yacht-Industry---Global-Strategic

Panama Anonymous Bearer Share Corporations by Ronald Edwards


Panama Bearer Share Corporation Advantages:

Panama is the only place in the world where you can form a truly anonymous bearer share corporation. Under Panama law a bearer share corporation can be formed that is owned by the possessor of the physical certificates of stock with no recorded owner on record anywhere. This is a bearer share corporation. They have mostly been eliminated in the world since 9-11. In Panama there is just plain and simple no registry with any ownership records for a bearer share corporation, so no one can access something that does not exist. True the lawyer could be contacted who formed the corporation in Panama but this would require a serious court proceeding to violate attorney client privilege, with lots of cause and of course the attorney would be duty bound to oppose such a court order. Violating attorney client privilege is a far more serious matter in the eyes of any court than requiring client records from a corporate registration agent so be careful to not trust your privacy to other than a law firm. Panama has 400,000 corporations registered, most of which will quickly leave if the see the courts violate privacy. Each corporation pays $300 a year in tax, which totals $120,000,000 and this, is for a country with 2.9 million people. The Panama Canal only nets Panama about $335,000,000 and requires 9,000 employees. How many people are required to run a corporate filing dept., maybe 200? Panama is a country very unlikely to violate corporate privacy.

No Corporation Ownership Registry in Panama

The lawyer in Panama may only have knowledge of the person who formed the company but not knowledge of others he or she may have transferred the corporation to since formation. Such transfers need not be reported and the new owner(s) need not be on file anywhere they just need to have the shares of the corporation physically. The transfer process could be completed in minutes if not seconds. The new owner(s) may reside outside of Panama, the new owners could be a corporation, foundation or be a trust in another country, etc. making any trails extremely difficult, time consuming, expensive and in general for most people not feasible to follow especially when you consider that no one really knows how many times the ownership may have been transferred. There is no ownership database for anyone to snoop into period. Thus the possibility of a fishing expedition is non-existent. The nominee Directors can be appointed and thus are not owners and their names are recorded publicly. We provide the three required directors for you complete with signed undated letters of resignation and they do not know who you are. You can effectively transfer the stock certificates privately with no record of the sale appearing anywhere. The new owner can replace the directors with his own directors at will. We can provide a blank bill of used boats for sale sale for the corporation signed by the nominee directors as an optional extra service, see our price list.

Anonymous Corporate Ownership of Assets

A Panama bearer share corporation can own bank accounts, real estate, boats, planes, cars, art, jewelry, businesses, and other valuable assets all without revealing the actual natural persons who own the corporation. Additional complex strategies can be employed using the lawyer to perform certain functions for the corporation. In Panama there is strong privileged communication between the attorney and the client.

Panama Corporation Banking

A bank anywhere in the civilized world will require a beneficial owner for any bank account and will also require identity documents for that person so the bearer share Corporation may not be able to conduct banking matters completely anonymously. In Panama there is serious bank secrecy laws in place providing for criminal and civil penalties. The Panama Bank Secrecy Laws combined with the Bearer Share Corporation formed in Panama using a world class Panama Bank provides the most secure and private asset protection scenario currently available in the world.

Your attorney may act as your agent and collect rents on an apartment building or office building your bearer share Corporation owns to keep the ownership of the property concealed from the tenants and others. The attorney merely forwards the rent proceeds to you or wires them to your bank account anywhere in the world. This is perfectly lawful in Panama. Your attorney could handle an auction where your corporation sells its art collection. The attorney collects the auction proceeds and forwards them to your bank anywhere in the world. Your attorney can buy or sell a yacht for your bearer share Corporation, handle the yacht registration in Panama and you can go sail around the world with your corporate stock certificates locked up in a vault box in your Panama bank.

Panama bearer share corporations can be completed in 2-3 business days after all the information is submitted.

Panama Corporation Unique Tax Benefits

One benefit is there is no tax imposed by Panama on any offshore derived income and there is not even a need to file any tax returns for the corporation if all the income was offshore derived. If you maintain an office in Panama, have a phone in Panama, have a Panama Corporation, and even have a bank account for the corporation in a Panama Bank yet there is still no need to pay taxes or even file tax returns if all the income is offshore sourced, in other words your income comes from payments made to you in Panama from entities not in Panama. For example if you decide to open a hot dog stand in Panama then you would need to pay taxes on this income since it would be derived from within Panama. If you sold goods to customers who were not in Panama and they wired you money into your Panama bank account from outside of Panama this would be offshore derived non-taxable income.

Panama Corporation Privacy

There is no registry in which to record owners of Panama Bearer Share Corporations. There is also no registry to record transfer of the corporation ownership. Even if one had a court order or subpoena from a Panama Court there is no registry to serve the court order on. To transfer the ownership of the Bearer share Corporation one need only hand the new owner the stock certificate. You could transfer ownership 12 times a day if you wanted to without reporting it anywhere or to anyone in the world.

Panama Corporation and Real Estate Ownership



Anonymous Panama Corporations may own property anywhere in the world. To sell the property one merely transfers the shares of the corporation along with a bill of sale signed by the nominee directors who dont know who you are (we can as your law firm and corporate resident agent assist with such agreements at your request). This could reduce taxes resulting from the sale of the property, since the property is not really being sold it is the corporation that owns the property that is being sold, the property is still owned by the same corporation. Remember there is no reportage of the sale of the corporation required in Panama. A Panama Corporation (or Foundation) can own real estate anywhere in the world and this makes the ownership anonymous. You can transfer real estate (or a car, boat, plane, art collection etc.) to the Panama Corporation in return for an annuity and we can supply you with such an agreement signed by the nominee directors. You could also arrange for your Panama corporation to make a loan against the real estate (or boat, plane, art collection etc.) thus removing the equity in the property sheltering it from potential financial enemies. You could even do this with a line of credit secured by a mortgage for the line of credit which you need not ever draw on. The Panama Corporation can own income producing property anywhere in the world and could collect rents (if the property is not in Panama would be tax free income to the corporation), hire property managers, etc. For more on these asset protection strategies see our section on real estate asset protection and in our price section we list some of these formal agreements we can supply to help you document the transactions formally.

Panama Company used to Trade or Hold Stocks, Bonds, Forex, Mutuals, etc.

A Panama Corporation can invest anywhere in the world. Panama has no capital gains taxation. A Panama Corporation can also get a CD in a Panama Bank with up to 7% interest rates for 5 years, again no taxation imposed by Panama. We can assist you in the opening of a Panama Stock Brokerage account where you can invest in 30 markets around the world and of course there is online access. We can also get you a stock brokerage account within a savings account in a Panama Savings and Loan which has Panama Bank Secrecy that would cover your stock trading account. There are many possibilities.

Be a Consultant for your Panama Corporation

Let us say you are a highly paid sales representative, broker, consultant, software developer etc. who works for entities around the world, not just in your home country. Well form an anonymous Panama Corporation and work for the corporation. Your clients would now pay the corporation directly and in turn the corporation pays you according to your wishes. There are no rules for a Panama Corporation in terms of expenses. This means the corporation can pay all of your medical expenses (self-insure) including elective health care like Plastic Surgery, Cosmetic Dentistry, etc. The corporation directly from its Panama bank account pays the health care provider by wire transfer for your elective procedures. The corporation can own your auto, boat, plane etc. used for company business. If you go to Nassau on business frequently the corporation in its overall wisdom may decide it is more advantageous to purchase a condo in Nassau rather than incur hotel expenses. The corporation may determine it is best for you to fly first class on business trips and pay for your tickets directly from its bank account by wiring http://www.marinaandthediamonds.com/ funds to the travel agent directly. The corporation in its overall wisdom may decide to pay for your legal services as a bonus and pay lawyers representing you directly from its bank account by wire transfer. It is always best to have a tax lawyer in your own jurisdiction advise you on any tax questions.

Panama Corporation as a Holding Company for Intellectual Property, Copyrights, Patents or Royalties

The Panama Corporation can purchase or own these rights to use or sell licenses to this property. You could transfer these rights to the Panama Corporation in return for an annuity or other property the corporation may transfer. This could have tremendous asset protection value since the assets of the corporation belong to the corporation, not you.

http://www.articlecity.com/articles/business_and_finance/article_8129.shtml

Kerry Agrees to Pay Massachusetts Tax on Yacht Docked in Rhode Island


Kerry_yacht_072310

"Isabel," the 76-foot yacht owned by Democratic Sen. John Kerry of Massachusetts, is undergoing repairs at the Hinckley shipyard in Portsmouth, R.I., Friday, July 23, 2010. (AP)

kerry_072610

Sen. John Kerry is speaks to reporters after an event at the former South Weymouth Air Station in Weymouth, Mass. Monday, July 26, 2010. (AP)

Sen. John Kerry tried to sail, but he couldn't hide.

The Massachusetts senator, after an uproar in his home state over the decision to dock his new $7 million yacht in tax-free Rhode Island, told his state's http://animalcrossing.wikia.com/wiki/Marina tax collector Tuesday that he would "promptly" pay all Massachusetts taxes on the yacht.

"As we've said from the beginning, we have always complied with tax laws and we always will," the senator said in a written statement. "The payment is being made promptly."

The 2004 Democratic presidential nominee has been dogged by charges of tax evasion since last week, when the Boston Herald first reported about his decision to dock the 76-foot sloop Isabel in Newport, R.I.

Doing so spared Kerry a $437,500 one-time sales tax charge in Massachusetts, as well as about $70,000 in annual excise taxes. Rhode Island repealed those taxes in 1993, making the state something of a nautical tax haven.



Massachusetts officials said Kerry was within his rights to base the vessel in Rhode Island, despite owning homes in Nantucket and Boston, but they also said he would be liable for taxes if he brought the yacht to Massachusetts within six months of taking ownership.

Subsequent news accounts placed the Isabel in Nantucket over the Fourth of July weekend and on Martha's Vineyard more recently. It is now in a shipyard in Portsmouth, R.I., undergoing warranty repairs. A Kerry spokesman said he chose to base the vessel in Rhode Island not for tax purposes, but charter opportunities and long-term service.

In his statement, Kerry said, "Whether owed or not, we intend to pay the equivalent taxes as if the boat's home-port were currently in Massachusetts."

The wording underscored the tax treatment Kerry and his wife, millionaire philanthropist Teresa Heinz, constructed for the boat.

It is registered in Newport but owned by a limited liability corporation based in Pittsburgh, hometown of both Heinz and the ketchup company from which her family derived its wealth. In recent days, Kerry has indicated Heinz was the majority stockholder in the corporation, raising questions about whether a Pennsylvania resident owed taxes in Massachusetts for a vessel based in Rhode Island.

Reporters dogged Kerry at a public event on Monday, and the issue bubbled over to the Massachusetts gubernatorial race on Tuesday.

Independent gubernatorial candidate Timothy Cahill, a former Democrat, told reporters it "looks like" John Kerry was dodging his tax bill and said the revenue department should investigate.

"I don't think that the state should treat anyone differently -- senators, congressmen or regular people -- so, if someone's not paying their taxes that should be paying them, then the DOR should go after them," said Cahill, who currently serves as state treasurer.

Gov. Deval Patrick, a fellow Democrat, also was asked if he thought Kerry was trying to avoid taxes.

"I think if there's a tax to be paid he's going to pay it," the governor said shortly before Kerry released his statement.

The Massachusetts Republican Party was unyielding in its criticism, despite the promised tax payment.

"Senator Kerry will only pay the taxes because he got caught," party Chairwoman Jennifer Nassour said in a statement. "He boating should spend more time creating jobs rather than customizing his yacht. Democrats think they live by used outboard motors another set of rules, and the voters of the commonwealth will soon remind them they do not."



The Associated Press contributed to this report.

http://www.foxnews.com/politics/2010/07/27/kerry-agrees-pay-massachusetts-tax-yacht-docked-rhode-island/

Launching of Allboats.com, More Than 500,000 Boats for Sale all Over the World.


AMSTERDAM, November 2 /PRNewswire/ -- Bohil Media - publisher

of, amongst others, Botentekoop.nl and Nieuweboten.nl - launches the

largest and most extensive search engine for international offers of

boats - http://www.AllBoats.com. AllBoats.com searches boat offers from

more than 30 sites and from over 100 countries.

'In the past years we have noticed that consumers are taking

progressively more note of boats offered from foreign countries during

the orientation and purchase phase of boats. Certain boat types simply

happen to be cheaper or more readily available in particular

countries', says Caspar Peters, Managing Director at Bohil Media.

'At AllBoats.com we are well in tune with this development.

AllBoats.com searches an offer of more than 500,000 boats.'



The most important information, such as year, price, dimensions,

type of motor and size, seller location, photos and extra

specifications, are collected. AllBoats.com presents this to sellers

through an advanced search function and translates the information into

English, Spanish, French, German and Dutch. For the complete description

users can click to access the original site. An important functionality

is the email alert; as a visitor you will receive all new boats matching

your search command in your inbox on a daily basis.



About Bohil Media



Bohil Media http://www.funnyordie.com/articles/0e2ad72eeb/marinawarehamboatyard?preview=BAhbB2kDjLYGSXU6CVRpbWUNh8EcgPvdBNAHOgtvZmZzZXRp/qCrOgl6b25lSSIIQ1NUBjoGRVQ=--1a5134c980f1a1aaaaf672394936aa12095a34ee BV is directed specifically at the market of boats and

campers / caravans. Bohil Media is publisher of, amongst others, the

magazines Boten and Camperscarvans and the websites botentekoop.nl,

nieuweboten.nl, camperscaravans.nl, nieuwecampers.nl, nieuwecaravans.nl

and campers.nl





Bohil Media is a subsidiary of Telegraaf Media Nederland.



About Telegraaf Media Nederland



Telegraaf Media Nederland is a subsidiary http://www.babynamewizard.com/baby-name/girl/marina of TMG (Telegraaf Media

Groep) and comprises an important part of the TMG activities in the

Netherlands: Publishing company De Telegraaf, HDC Media, Holland

Combinatie, BasisMedia, WebRegio Media, Pilarczyk Mediagroep,

402EVENTS.COM and Telegraaf Productiehuis. In total, Telegraaf Media

Nederland operates more than one hundred print titles and just as many

websites. This makes Telegraaf Media Nederland the most complete media

house of the Netherlands, with different media brands and platforms that

are very important to the consumer and advertiser.



http://www.allboats.com



Note to the editorial office, not for publication: For further

information please contact: Caspar Peters, Managing Director at BoHil

Media, Tel. +31(0)20-509-11-44 or caspar@bohilmedia.nl



http://www.thefreelibrary.com/Launching+of+Allboats.com,+More+Than+500,000+Boats+for+Sale+all+Over...-a0210990079

Hippo Chases Behind Speed Boat in Frightening Moment Video


Now Playing: Baby Pygmy Hippo Goes for One Adorable Swim







Now Playing: Watch This Aunt Totally Freak Out at Baby News









Now Playing: This TV Reporter Is Really Bugged by Cicadas







Now Playing: Man Calls 911 Over Stuffed Tiger: 'It Seems Pretty Dangerous'







Now Playing: Florida Woman's Toilet Clogged by Iguana Intruder







Now Playing: Man Calls 911 Over 'Aggressive' and 'Mad' House Cat







Now Playing: Man Caught Dancing to 'Rich Girl' Atop Patrol Car







Now Playing: Raccoon Uses Umbrella to Stay Out used boats of Rain







Now Playing: See Man's Body Covered With 1.1 Million Bees







Now Playing: Kids Captivated by Gator on used outboard motors for sale Front Lawn







Now Playing: Python's Taste for BBQ Tongs Leaves It Hospitalized







Now Playing: Koala Wanders http://vermontmarina.com/ Into Hospital Waiting Room







Now Playing: Honolulu Food Festival Showcases Spam







Now Playing: 'Van Goat': Meet Bodie, the 4-Year-Old Goat That Paints

http://www.marinachamber.com/ ng-click="playVideo('30306166', $event)" class="_relvideo" href="http://abcnews.go.com/US/video/painting-goat-new-mexico-dubbed-van-goat-30306166" data-idx="13">





Now Playing: California Hills Are Alive With Mystery Piano's Music







Now Playing: What This Leopard Kitten Does Will Make Your Day







Now Playing: Little Girl Scolds Aunt for Using 'Bad Word'







Now Playing: Pope Francis Receives a Special Delivery







Now Playing: Great-grandmother Skydives for 100th Birthday







http://abcnews.go.com/GMA/video/hippo-chases-speed-boat-frightening-moment-28214354

Fontana Beach on Geneva Lake in Fontana Wisconsin


Being a local has its advantages.



I've just started to realize what I've been missing all along. I live here, people vacation here, but I LIVE HERE ! I've been too busy to realize what a beautiful area this can actually be and that there are many things to do and see around here, close to home, that I've never taken advantage of yet (keyword: yet! )



We've been doing a lot of walking on the beach in Fontana, WI lately. The beach is located on gorgeous href="http://gmagoldie.hubpages.com/hub/Chicago-Day-Trip-Lake-Geneva-Historical-Museum">Geneva Lake. The lake is approximately 8 square miles with a maximum depth of about 144 feet.

Currently it's a beautifully, quite place to take a walk. The water lapping at the shoreline, a few crazy jet skiers, out on the still very cold water, break the http://marinavikings.org/ silence once in awhile. The sand feels great on barefeet (not to forget to mention how sand is a wonderful abrasive for removing the dead skin on the bottom of your feet... get ready for summer girls!)

It's early, before the summer season begins. You see a few Illinois license plates trickling in here and there. Yet mostly, the beauty is all motor boat ours, the locals, at least for another month or so until about September when tourist season ends. (Don't outboards for sale worry Illinois people, I'm one of you, born and raised Chicago style. I might complain about your driving while you're here, but I know I drive just like you do when I'm visiting back at home. lol)

http://upsidedownworld.hubpages.com/hub/Fontana-Beach-on-Geneva-Lake-in-Fontana-Wisconsin

looking for a 4 stroke 9.9 to 25 horsepower outboard boat motor?


Report Abuse

Additional Details

If you believe your intellectual property has been http://www.dailymile.com/people/brentwpeterson/entries/31579717 infringed and would like to file a complaint, please see our Copyright/IP Policy

Report Abuse

Cancel

Report Abuse

Additional Details

If you believe your intellectual property has been infringed and would like http://www.parks.ca.gov/?page_id=10915 to file a complaint, please see our Copyright/IP Policy

Report Abuse

Cancel

Report Abuse

Additional Details

If you believe your intellectual property has been infringed and would like to file a complaint, please see our Copyright/IP Policy



Report Abuse

Cancel

https://answers.yahoo.com/question/index?qid=20110503180707AAqoiaF

Jet Skis Ban Approved - ABC News


Jet Skis and other personal watercraft will be

banned in all national parks and recreation areas after two more

summers under a settlement approved by a federal judge today.



The gasoline-powered personal watercraft are already banned from

66 of the 87 parks, recreational areas and seashores where

motorized boats are allowed throughout the nation. Today's order

by U.S. District Judge Gladys Kessler affects the remaining 21 parks.

Kessler dismissed a challenge from watercraft manufacturers and

vendors to the agreement negotiated last December by the Interior

Department and the Bluewater Network, a San Francisco-based

environmental group. The Bush administration endorsed the accord.

The Park Service agreed that unless it can prove the machines

don't harm the environment on a site-by-site basis, each will be

added to a list of Jet Ski-free zones by Sept. 15, 2002.

"This Jet Ski settlement is great news for the national

parks," said Sean Smith, spokesman for the San Francisco-based

Bluewater Network environmental http://jazztimes.com/community/articles/152108-finding-the-best-boat-repair-marina-wareham-boatyard group that had sued the National

Park Service. "It will better protect the visiting public as well

as park resources and wildlife from these noisy, smelly and

dangerous machines."

Ski Industry: 'We've Been Singled Out'

Last year, the Park Service banned https://www.facebook.com/marinaissad Jet Skis from two-thirds of

the national parks. That prompted Bluewater Network to file a

federal lawsuit to widen the ban to the remaining 21 parks and

recreation areas. The Personal Watercraft Industry Association and

the American Watercraft Association tried unsuccessfully to

intervene.

Manufacturers and owners have argued that personal watercraft

pollute less and are more maneuverable than motorboats, and that

the nation's 1.2 million watercraft owners have http://marinawarehamboatyard.blog.com/2015/01/12/finding-the-best-boat-repair-marina-wareham-boatyard/ a right to use

public waterways.

Monita Fontaine, the industry association's director, said

today she was disappointed but still expected to get Jet Skis,

which cost an average of $7,000, approved for use in the parks

based on new technology that cuts emissions and noise.

"We're not happy with the process, we believe we've been

singled out," she said. "You can take any other boat you want in

the park -- you can take a cigarette boat."

Over the past three years, she said, the two-stroke outboard

motors used in Jet Skis have reduced their hydrocarbon emissions by

75 percent and their noise by 70 percent.



"If there is evidence that there is a substantial impact on the

environment from Jet Ski use, they have the right to ban them,"

she said. "However, we believe that we will be able to pass any

environmental assessment."

-- This embed didnt make it to copy for story id = 93579.

http://abcnews.go.com/US/story?id=93579

Boating Tips - Galvanic Corrosion Video


Boating Tips - Galvanic Corrosion

Description



Learn must have tips and advice from The Encyclopedia of Boating Tips. In this video,you'll learn about galvanic corrosion.

Transcript

Jim Shafer: My name is Jim Shafer. I'm a marine surveyor and marine electrician. One of the areas I specialized in as what's referred to is Galvanic Corrosion among the water metals of boats. Sometimes it referred to, as like electrolysis but that is an incorrect usage of the word its Galvanic Corrosion. It's very important to remember the Galvanic Corrosions are natural occurrence, physical phenomenon, when you connect a bronze prop stainless steel shaft in a sacrificial Zinc altogether you put them in a electro lite.

Galvanic Corrosion is caused because its current flow causes the anodic component with this case to Zinc, anodic component to give up electrons to protect the stainless called the cathodic component and in doing solid, misses or looses metallic ions and it waste the way and that instant is called sacrificial anode. When anode looks like this, when its starts to be consumed to protect the stainless and bronze prop its looks like that. It's very important to remember if this zinc sacrificial element these elements to maintain their function, you must maintain electrical contact with the other metel, the stainless steel in this case to stainless steel shaft.

So the manufacture has cast in this case a copper ball, which maintains contact with the stainless. In this little pad zinc, which goes on rudder possibly our trim tab is casting a brass insert or bronze insert. In the case of this whole zinc manufactures casting in aluminium bar. All these components will maintain their contact with stainless fasteners because these casting components. Without this you would disconnect and become electrically unhooked within matter of months. The Galvanic Corrosion occurs no matter what's you do, because you put the some metals in the water. Because how much metals in the shaft, how much metal in the prop, how much in the zinc wise we can't control the rate at which we consume anode to protect the shaft.

Normal you should plug the boat in to a dark, however we have the whole marine all the other boats, just you see well anything else it's buried in the ground we have to protect all of that. Now we loose control, we loose control we get rapid zinc loss we might have a fairly damaged prop or Michal so far has to loose an entire aluminium attires in this little less six months because of the Galvanic Corrosion, so this became the sacrificial component of the battery. After zinc on the shaft to whole attire and we do about --

We can leave the boat on plugged this cuts two half from the marine then your zinc's will protect only your metal. The shafts in the props, you can plug the boat and install the isolation transformer, which we talk about here but that comes of many boats as special aluminium and steel hose or have a Galvanic isolator and we don't open that, we are going to get down and make a test of this boat and see if you supplying current of the dock using this zincs protect the dark. To determined and this boat is going to have problems, with sacrificing at zinc with applying protection of a whole dark. We have to remove this short code which we have done, we put in the water, next to the boat a reference cell is a standard use to measure Galvanic voltages, we connect a digital voltmeter to the reference cell set it on the milliampere scale and connect the ground, understand that the ships burning system and Ic ground are common to boat-to-boat this is very important to establish this by the way for safety.

We never cut the ground on a yacht to protect it from galvanic corrosions dark. We loose our set; our IC safety and we could create these potentials, which could which could cause injury. Take the ground pin on the plug and with the prop on the ground pin compare the voltage to our reference cell in the water. This is 0.9 volts but I would expect the both it has bronze prop stainless shafts in the copper, manganese, zinc. I would expect about 0.9 volts. Galvanic Corrosion when we plug the boat in and we'll show you that the dock voltage by going to the grounding, shallow on the dock or let measures 4.4 volts. Doesn't have all immediately accept this. We you have two differences of potential it cracking together with current flow. We don't want current flow means our zincs are providing sacrificial electrons swelling off the boat to protect something else in the marine, which will lose control of our zinc protection for the boat.

Whatever we know we probably have a problem, we probably have problem because this measures 0.9 and this measure is 0.4 and we connecting together we are going to have some other voltage but how we do that lets look at the current that might flow from the boat to the dock. In this case we take our digital voltmeter turned into a digital ammeter connect the negatively to the burning system which we access through that pin on the plug and other way we connect the, so they shell otherwise skeptical that is bouncing around with that almost half an hour, 500 millions almost half an hour of sacrificial current running off the boat somewhere else marine. We would expect there for substantial increase in our weight up zinc lose not to protect our boat protect the whole marine. But we don't want to do that. Luckily do about that, besides leaving the plug out heaving freezer get -- many boats have an isolation transformer throughout going to here the alternative, the third option was called galvanic isolator. It provides a door or gate to prevent the galvanic current fall at very low levels that what you saw less then involved and less than http://marinavikings.org/ amp, yeah we retain the very important integrity of our ground weight for IC safety.

If I install this galvanic isolator in series with my needle, this is in series now its connected so that its in the line as if I had cut the green ground in a both the boat and install this device to handle electrical panel on the something here. Now I connect by leads to the body, it's zero current fall, so I just cut off galvanically from the rest of the dock and retain my very critical green ground safety link. We do not disconnect green safety links to produce this zero current result. Mostly if we establish this we can really tell why this boats loosing zincs and rapidly and assured providing protection for rest of the dock. Another way to confirm this test to confirm the problem is to connect is to gain access to the dock ground, after you plug your code in, so I made up this jumper, which gives me access to the ground. As that works.

We are going to connect this again show galvanic voltage using the reference cell. The galvanic we had before on the dock was about 0.4 volts, 400 kilovolts or 0.12 volts. We had on the short code; we had disconnected about 0.9 volts. Now if we have we demonstrate current flow between the short code and the dock we hope that up what happens when we plug this in to the dock now. We can further boat demonstrate this problem if the voltage was different in the first two readings.

See what it is and with have my access here is 0.7 some where between 0.4 and 0.9 this indicates that we have a combine battery now with a new potential, so tip of right away something is wrong. We confirm that by measuring the actual current flow of the boat was a with the plug on boat.



Related Articles

Boating Tips - Galvanic Corrosion

Galvanic Machine Uses and Treatments

For enhancing and refining body and facial skin, and also for revitalizing hair http://nameberry.com/babyname/Marina growth, a tool is used which is called galvanic machine. They were at first used only at spas, but now a days, manufacturers have come with their made-at-home counterparts that are very easy to use....

Fishing Boats

For those who are experienced with boating, choosing and obtaining the perfect fishing boat is an easy task. But for individuals who have never tried to buy a fishing boat, it is surely a daunting task....

What Is Galvanized Steel Band?

Galvanized steel banding is used in ensuring that buildings are stronger and to make weak areas of the buildings stronger, too. Galvanized steel is usually made of strong alloys; that is why stainless steel is not required in buildings....

Galvanic Machine Uses And Treatments

For enhancing and refining body and facial skin, and also for revitalizing hair growth, a tool is used which is called galvanic machine. They were at first used only at spas, but now a days, manufacturers have come with their made-at-home counterparts that are very easy to use....

Galvanic Anode

A galvanic anode, a type of sacrificial anode, is one of the main components of a galvanic cathodic protection system used to protect metals from corrosion, by the use of a metal electrode which is itself consumed instead in an anodic oxidation reaction....

Understanding Corrosion



In this article we are going to discuss corrosion and what happens to the metal when corrosion happens. When a metal reacts with water and oxygen corrosion starts to occur....

Galvanic - The Ultimate Spa Treatment!

Maintaining beauty and youth is not something that we have full control of. In fact, many of us feel frustrated that the visible signs of aging and stress are so evident despite the many ways by which we prevent them....

http://video.ezinemark.com/boating-tips-galvanic-corrosion-42e640b5068.html

Google Founder Larry Page Bought Superyacht "Senses"


Larry Page, best-known as an American computer scientist and the founder of Google splashed out to purchase a superyacht named "Senses" early this month. The luxury cruise, formerly belonging to a rich New Zealand businessman, Sir Douglas Myers costs EUR35 million, equivalent to $45 million. The yacht of adventure, designed by Philippe Starck and Philippe Starck in 1999, is 59 metres long and 13 metres in height with a maximum speed of 14 knots because of two engines of 1600 CV. Most lately, the superyacht "Senses" was showcased in Gibraltar and at the Monaco Yacht Show 2010. Let\'s take an in-depth look at the newly-bought luxury superyacht "Senses" of Goolge founder Larry Page via the following breathtaking images.

The $45 million ship named

The $45 million ship named "Senses" of millionaire Larry Page was bought from a New Zealand tycoon, Sir Douglas Myers

The steel-hulled cruise, designed by Kusch Yachts and Philippe Starck in 1999 can accommodate up to 10 guests and 14 crews within six decks in total

The steel-hulled cruise, designed by Kusch Yachts and Philippe Starck in 1999, can accommodate up to 10 guests and 14 crews within six decks in total

The magnificent and luxury yacht is 59 metres in length and steel-hulled, featuring modern jacuzzi, helipad, fitness center, and so on

The magnificent and luxury yacht features modern jacuzzi, helipad, fitness center, and so on

According <a href=https://independent.academia.edu/MarinaWareham/Post to the charter in the Seychelles Islands, before bought by technology millionaire Larry Page, " width="480" height="277" />

According to the charter in the Seychelles Islands, before bought by technology millionaire Larry Page, "Senses" was for rent with the price of $343,000 a week, excluding food, drink and fuel

The cruise\'s several decks are specially designed, offering best views at dawn or sunset, and leisure space for outdoor parties

The cruise\'s several decks are specially designed, offering best views at dawn or sunset, and leisure space for outdoor parties

There is also a mini runway for helicopters and entertainment zones with <a href=http://www.eteamz.com/marinawarehamboatyard/news/index.cfm?id=5839484&cat=0&SitePage= lots of games and toys" width="480" height="322" />



There is also a mini runway for helicopters and entertainment zones with lots of games and toys

Page, a 37-year-old computer scientist cum technology innovator cum entrepreneur, is best known as a co-founder of Google Inc.

Page, a 37-year-old computer scientist, technology innovator cum entrepreneur, is best known as a co-founder of Google Inc.

According the poll by Forbes, Larry Page owns his net worth of up to nearly $15 billions

Larry Page owns his net worth of up to nearly $15 billion



In 2007, he got married to beautiful model Lucinda Southworth at Necker island, and they now have a one-year-old son

In 2007, he http://marinafilm.com/ got married to beautiful model Lucinda Southworth at Necker island, and they now have a one-year-old son

Related links:

Luxury Yacht Charter Mediterranean

Catalina Yachts Choices in Boat and Yacht Clubs

The Banderas Bay Yacht Experience

http://vehicle.ezinemark.com/google-founder-larry-page-bought-superyacht-senses-77368e957af2.html

Al-Qaeda executes 2 alleged spies after Yemen leader killed in drone strike


Al-Qaeda executes 2 alleged spies after Yemen leader killed in drone strike

Al-Qaeda militants in Yemen killed two men accused of spying for the U.S. and hung their bodies off a bridge on Wednesday, a day after the jihadi group announced the death of its leader in an American drone strike.

The killings came a day after al-Qaeda in the Arabian Peninsula (AQAP), as the Yemeni affiliate is known, said its leader, Nasir al-Wahishi, was killed in a U.S. drone strike last week.

See also: U.S. drone strike kills al-Qaeda cleric in Yemen

al-Wahishi was a close associate of Osama bin Laden in the years leading up to the events of 9/11. Sent to a Yemeni prison in the aftermath of the attacks, al-Wahishi http://marinawarehamboatyard.blog.com/2015/01/12/finding-the-best-boat-repair-marina-wareham-boatyard/ escaped with a large group of fellow prisoners in 2006. He's since been credited with the merger of two groups that resulted in the formation of the AQAP, which has been responsible for several attacks and attempts, including the 2009 "underwear bomb" attempt onboard a U.S. plane and January's Charlie Hebdo attack.

Witnesses said al-Qaeda gunmen in the southern city of Mukalla read out charges before fatally shooting the two men, one of whom was accused of guiding the drone that killed commander Nasr al-Ansi and a media liaison known as Muhannad Ghalab.

Al-Qaeda captured Mukalla in April after Yemen's army splintered between allies and opponents of Shiite rebels known as Houthis. But the city has proven to be something of a death trap, with U.S. drone strikes in and around Mukalla killing not only al-Wahishi and al-Ansi, but also a senior religious ideologue, Ibrahim al-Rubaish.

In a report published late Wednesday, the Washington Post said the CIA http://disney.wikia.com/wiki/Marina didn't even know al-Wahisi would be killed in the strike.

ISIS claims responsibility for car bombings

Elsewhere in Yemen, ISIS has href="http://www.cnn.com/2015/06/17/asia/yemen-crisis/index.html" target="_blank">claimed responsibility for a series of deadly bombings in the Yemeni capital of Sanaa that have killed and wounded dozens of people. Al Jazeera reports that the four targets hit were three mosques and the political headquarters of Yemen's Houthi rebels.

Online statement: ISIL in Yemen claims responsibility for car bomb attacks in Yemeni capital - @Reuters

-- Hashem Said (@hash_said) June 17, 2015

In a statement posted online, the so-called Sunni Muslim Islamic State said, "The soldiers of the Islamic State in Yemen, in a wave of military operations as revenge for the Muslims against the Houthi apostates, (detonated) four car bombs near the centers of Houthi apostasy."



Mideast Yemen

A destroyed vehicle is seen at the site of a bomb attack in Sanaa, Yemen, Wednesday, June 17, 2015.

Image: Osamh Abdulrhman/Associated Press



"@nationalyemen: Massive explosions hit 3 mosques in #Sanaa just few hours before #Ramadan starts pic.twitter.com/SnamwUOo9d" #Yemen

-- Phil Buck (@Phil_Buck) June 17, 2015

Another explosion earlier in the day destroyed the http://www.metrolyrics.com/marina-lyrics-rocco-granata.html home of Abdel-Aziz Jubari, a politician participating in UN-led peace talks in Geneva that are aimed at bringing about a truce between Yemen's exiled General People's Congress government and the Iran-backed Houthi rebels. The UN has since announced that those talks, slated to end on Thursday, have been extended to Friday.

Additional reporting by Mashable.



Have something to add to this story? Share it in the comments.

http://mashable.com/2015/06/17/al-qaeda-kills-spies/

Spy Novels Research In Morocco


Why go cruising in North http://marinawareham.jigsy.com/entries/general/finding-the-best-boat-service-marina-wareham-boatyard Africa? I cruised the coast in the autumn of 2010, just before the Tunisian revolution, whilst researching locations for spy novels. If you own a yacht and are thinking about sailing in the Mediterranean, then give a thought to cruising the North African coast. Yes, it has some challenges, but if you've cruised the Spanish coast and the Balearics, you will have learned that coast has its difficulties too - not least of which is finding a mooring in high season. It is very different in North Africa.

Along the Maghreb, prevailing winds in summer months are broadly easterly, and in the winter season from the west. The autumn is a particularly good time of year to cruise, when the winds arestaring to go westerly and the air is not as stifling as in the summer - there tends to be more breeze and less motoring if you are a sailor. Obviously though, the wind direction better suits a West-East passage in the autumn.

The exotic city of Tangier is the first port of call as you enter the Straits of Gibraltar approaching the Pillars of Hercules. It is a tourist trap and mooring can be difficult. Ten miles south of the Straits is Marina Smir, Morocco. Part of a fading tourist centre, it has plenty of space (even for tall ships) and a good boatyard. If you've never seen a camel in a marina, then you might see one here. Diesel fuel is much cheaper than in the EU.



M'Diq, the nearest town, is about five miles away, with a local market, butchers and fishmongers. Alcohol can be found, but with difficulty. It is a very male-orientated Muslim society and ladies' toilets can be hard to find.

There are several harbours and marinas within a day's sail of Smir, but Smir is a port of entry to Morocco. Ceuta nearby, and Melilla (120 mls away) are enclaves governed by Spain and part of the EU.

The Moroccans are not very keen on your anchoring - you really should get permission first in port.

Going east from Morocco, we come to Algeria. Few people cruise there as there are political problems and the coastline is strictly controlled. You could take a leg up from Smir to say, Almeria in Spain. Hopefully, the situation will improve in the near future as I'd love to cruise there. Whichever way you go, there will be plenty of shipping to keep you on your toes.

Tabarka is the first port after you have passed Algeria, just 8 miles over the Tunisian border. It has a magnificent Genoese fort guarding its approaches. The marina, adjacent to the town, is somewhat run down, but the people are very friendly. It can be very hard to adjust to the 'bakhsheesh' culture - basically a gift for services rendered. For example a customs official will ask quietly if you have 'something to present to him'. Cheap whisky or cigarettes - they can all be given. Avoid giving cash if you can.

Heading northeast around Cap Blanc, the marina at Bizerte has been closed for redevelopment, and should be open for the 2012 season, subject to the political issues.

Next, Sidi Bou Said. It is close to Tunis, and the Presidential Palace is close by the marina. The ruins of Carthage are close by and well worth a visit. Tunis is a short train ride away - a modern city but with lots of soukhs and a great sense of French colonialism. It really is a terrific place for authors of spy novels.



This is not a 'cheap' marina, though costs in general along this coast are much less than in Italy for example. There are French-style supermarkets, and wine and beer can be bought.

Further south from the Gulf of Tunis areMonastir and Sfaxx. The Tunisians as did the Moroccans invested heavily in marinas, but many are faded now. Boatyard facilities are good and hauling out is more economical than in Italy, so it is a good location to spend the winter. Need a break from the sea? You can always take a trip into the Sahara on a camel! All in http://bulbapedia.bulbagarden.net/wiki/Marina_(Johto) all, a fantastic area for authors of thriller and spy novels!

http://www.articlesnatch.com/blog/Spy-Novels-Research-In-Morocco/3570295

What And What Not To Do While Boating


The fact that boating is a fun and a very relaxing activity that motor boat the whole family can enjoy, it's not really very surprising why there are so many people who are getting in to this activity. Besides, this activity is a great experience where the whole family can participate. It can take you to areas where people rarely see and it can let you appreciate nature more.

Boating is also a great activity that you and your friends can enjoy. As the captain and the owner of the boat, you have to consider the fact that you are responsible for getting all the safety equipments onboard and know how to use them. Also, you are responsible for the safety of your passengers and your fellow boaters.



You have to consider the fact that boating is also a vehicle just like your car. Therefore, you should be a http://www.youtube.com/watch?v=0wXiJgCRH4Y responsible boater in order to avoid any accidents. Just like driving, you have to know that it is important to be a responsible and safe boater to avoid any unwanted accidents that may occur when operating a boat.

Some boaters neglect these rules and resulted in making a great boating day a disaster. Some have lost lives because of the irresponsibility of a boater. This is why it is important for you to know what to do and what not to do when you go boating.

Boating is great fun. However, when you mix alcohol and boating, it can turn a great boating day to a disaster. There have been a lot of reports of boating accidents which resulted from an intoxicated boater. You have to consider the fact that boating under the influence is just as dangerous as driving under the influence. Besides, you can never really truly enjoy boating when you and your friends are intoxicated.

Never mix drinking and boating. If you and your friends have to drink, do it after you go boating and not before and while boating.

The next thing you have to do is get all the necessary safety equipments and know how to use them. Starting with the life jacket, this particular safety equipment is mandatory to all boaters. You have to wear life jackets and provide life jackets to your passengers.

It is a fact that someone accidentally falling off a boat is one of the most common and also the most preventive accidents in boating. You have to consider the fact that most people who drown while going boating is not wearing a life jacket.

Always remember that life jackets float and people don't. Wear your life jackets.

You also have to get a vessel safety check. This is a non-enforcement examination of your vessel by certified organizations and individuals. By getting a vessel safety check, you will be able to know if your vessel is seaworthy or not. You will also know all about the other equipments you need in order to safely operate your boat.

The best thing you can do when you want to go boating is attend a boating safety course. This course can provide you with all the information about boating safety. Also, this course is a fun and great way to learn. In this course, you will learn about the different safety equipments, safety procedures, and also improve your navigational skills.

These are some of the things that you should do and not do when you go boating. By keeping all of these in mind, you can definitely be sure that you will have a fun http://dictionary.reference.com/browse/marina and relaxing boating experience for a long time.

http://www.articlesnatch.com/blog/Boat-Safety--What-And-What-Not-To-Do-While-Boating/104651

As Boating Season Approaches, Austinites Need Look No Further Than Freedom Boat Club


AUSTIN, Texas--()--With rainfall predictions near or above normal and an active hurricane

season for 2014, according to the Farmer's Almanac, Austin may be seeing

a full lake this season. To make this active summer season more

convenient and enjoyable than ever, Freedom Boat Club is expanding its

fleet in preparation for a busy boating season.

Freedom Boat Club is a members-only boating club that provides a simple,

sophisticated alternative to boat http://www.babynamewizard.com/baby-name/girl/marina ownership. With 24 boats to choose

from in the Austin area alone - ranging from wakeboard and ski boats to

pontoons and deck boats - Freedom Boat Club removes the hassle of boat

ownership. Members simply make a reservation with their preferred boat

and show up at one of two Austin locations. The boat is ready and

waiting with a full tank and knowledgeable staff. Members, along with

any guests, depart and enjoy their day on the water. When finished, they

simply return the boat to the dock and head for home. With Freedom Boat

Club, there is no http://www.metrolyrics.com/marina-lyrics-rocco-granata.html worry of maintenance, cleaning, launching or storing

the boat; the staff takes care of everything.

"Over the years I have owned, rented and leased boats for my access to

water," said Jim Bailey, Freedom Boat Club member. "Each option yacht came

with its own set of problems. I joined Freedom Boat Club about five

years ago. They make boating easy, and it has cost me less than any

other option. Great boats, great staff and lower costs for fun."

With five new boats for the 2014 season already added to the fleet -

including two 2014 Tritoon Caribbeans with 250 outboards and three

Ebbtide Bowriders - and an expected four more by mid-summer, Freedom

Boat Club provides its members with the newest and most reliable boats

on the market.

"We choose brands based on performance, feel and reliability," said Bill

Marquardt, co-owner and operator of the two Austin locations. "We want

boats that people can be proud to be seen in, but just as importantly,

we want them in safe and reliable products."

In addition to its recent growth, the Texas division of Freedom Boat

Club was honored as Franchise of the Year at the company's annual

gathering held in December 2013. The Texas division was recognized for

its growth in membership and revenue, as well as its exceptional

customer service.



"Winning the Franchise of the Year was a huge honor," said Marquardt.

"The Austin area was in a severe drought last year, and we still managed

to have a successful year, which speaks volumes to the experience we

provide at both our convenient locations. We have already seen a

successful start to the 2014 season and are on pass to exceed last

year's numbers."

Marquardt is using the franchise's growth to give back to the community

and recently donated a one-year membership ($8,000 value) to the 2014

Dell Children's Gala Raffle, benefitting the Dell Children's Medical

Center of Central Texas.

To learn more about Freedom Boat Club, become a member or find the

nearest location, please visit www.FreedomBoatClub.com.

About Freedom Boat Club

Founded in 1989, Freedom Boat Club is the world's largest members-only

boating club, providing a simple alternative to boat ownership. Freedom

Boat Club boasts more than 75 franchise locations from seashores to

lakeshores, each providing a fleet of boats that come with less stress

and a lower price tag than owning a single boat. To learn more about the

Freedom Boat Club, visit www.FreedomBoatClub.com.

http://www.businesswire.com/news/home/20140423005076/en/Boating-Season-Approaches-Austinites-Freedom-Boat-Club

Guide to Buying Electric Radio Controlled Cars


Remote controlled cars come in several models and designs. The major categories of radio controlled cars are electric RC cars and gas powered RC cars. Apart from standard types of cars, these remote controlled vehicles are manufactured as racing cars, small trucks, jeeps, monster trucks, etc. In an electric car, the major components are the car kit, the electronic speed controller, the radio control system, electric motor, batteries and battery charger. The car kit is the basic starting point of the car and it could be easily assembled at home. Assembled models are also supplied for those who do not wish to take any risk. The electronic speed controller is a small electronic device and it controls the speed and power of the radio controlled cars.

The radio control system comprises of the steering servo and radio controller. The radio control unit consists of a transmitter, a receiver, 2 servos, servo horns, on/off switch, and battery holder for the receiver. The electric motor comes in two types, brushed motors and brushless motors. The most popular motors are 540 size motors. Standard battery pack consists of 7.2 volt batteries. Previously nickel-cadmium (NiCad) and nickel-hydride (NiMH) batteries were used but of late, LIPO batteries are considered the latest technology. These batteries are not only light but also more durable.



The battery chargers are specially designed for each type of battery. To cite an example, a NiCad charger could not be used to charge LIPO battery. Battery chargers are manufactured in two types. One is a time charger. You should monitor the battery continuously with this type mercury marine of charger to find out whether it is fully charged. Normal charging time would vary between 15 and 30 minutes. The other type of charger is peak detection boat sales charger. This charger is costlier but the charging of the battery http://www.last.fm/music/Marina is more efficient. The peak detection charger would sense the full charge level of the battery and shut off charging automatically. This is the ideal charger, since overcharging of any battery could easily destroy it.

The normal speed of the radio controlled cars range up to 25 miles an hour. This is the ideal speed for beginners. However, the remote controlled cars could be modified to run with speeds more than 40 miles per hour by using faster motors, high power batteries, and different types of ball bearings. For those new to the hobby of remote controlled cars, electric https://www.facebook.com/marinaissad radio controlled cars are preferable to Petrol RC cars. They have fewer problems, they run quietly, and they do not emit any harmful fumes.

The ideal cars for starting are the electric touring remote controlled cars that are designed as sedan type and they resemble real cars very closely. Both 4-wheel and 2-wheel drive models are available. Further, they are manufactured as shaft or gear driven and belt driven. Shaft driver RC cars have higher speeds, while belt driven RC cars are more stable around corners. However, you could also buy racing cars, jeeps, and trucks later on to add to your collection, when you are able to maneuver them better.

http://craft.ezinemark.com/guide-to-buying-electric-radio-controlled-cars-7d2d9d6289bf.html

Exercises to Get Rid Of Cellulite


Aging, genetics, hormones, and sudden weight fluctuations are a number of the factors in charge of cellulite, the lumpy, dimpled skin seen about the thighs, hips and buttocks of most post-pubescent women. However, cellulite does not appear in a day or two, it takes a lot of time. Still, lots of women hate it, since it makes them feel unattractive and self-conscious.

So, how can it be that these beautiful new moms never appear to are afflicted by cellulite while pregnant or even after, while the others people suffer relentlessly even with trying for several years to get our pre-baby body back. They can do just about anything at all to reduce cellulite. Therefore exactly what can you are doing about cellulite?.

Most conspicuous about the thighs and buttocks, additionally, it may occur on other body parts, particularly the lower abdomen, arms, and ankles. Start with slow steps for 10 minutes, and gradually increase your pace. Information represented around the site includes product information, ingredients, and reviews. Then again, once you can afford a small month-to-month expense, then undoubtedly go for your simplest & fastest option of all, anti cellulite cream. Utilize the cream twice daily for max results.

Lunges: These are very beneficial to have rid of excessive cellulite. Our inhabitants is becoming extra prosperous, and due to this fact on the lookout for further options then simply surgical procedure and train to unravel cosmetic points reminiscent of cellulite. This is the solely verified treatment for decrease lumpy skin for great, as against merely spanning it way up.

While you can find indeed many other treatments that can reduce the outcomes of cellulite, these usually just work superficially, enhancing the skin to mask the fat. Some patients who are http://cellulitiscure.com extremely overweight and obese may be advised to undergo liposuction, a procedure that requires removal of fat deposits. Cellulite formation is usually limited towards the thighs, buttocks, and also the stomach region. Therefore exactly what can you do about cellulite?.

Generally, cellulite appear in your skin when your skin pores block due to fat intake. It removes fat deposition from the cuff muscles and thighs. Yoga gets towards the cause http://www.doctoroz.com/videos/best-cellulite-cures of the problem, getting rid of deep-seated fat cells and excessive fluid, thus causing you to be cellulite free for good.

Apart from following the aforementioned exercises, get adequate rest by sleeping 8 hours a day. Now, move you legs pretending as should you are riding an imaginary bicycle. In the event you\'re on a decent finances, your greatest guess would be to go together with all the free cures listed close to the top. Make healthier food choices by eating fresh fruits and vegetables, drinking green tea, etc. Always consult a physician before starting any physical fitness program in order to cut back the likelihood of injury.

Spotlight On Block Island\'s Great Salt Pond


One of the very impressive structures I\'ve seen and visited in Singapore is the Marina Bay http://disney.wikia.com/wiki/Marina Sands, a luxurious hotel and casino recently built on this Island City. A great deal of people these days choose riding bikes for commuting to work and back or get fit, but it is also a fantastic hobby which is often enjoyed by almost anyone. Cycling with friends or family is a great approach to socialise, get fit and explore your surroundings. Cycling with friends or family is really a great way to socialise, get fit and explore your surroundings. Whether flying into Singapore, or coming by boat, bus or train http://www.blackplanet.com/your_page/blog/view_posting.html?pid=2845175&profile_id=65220362&profile_name=alivepants9968&user_id=65220362&username=alivepants9968 you can\'t miss this architectural masterpiece.

Three enormous hotel towers rise from the Marina Bay, placed on top of these three mega pillars another horizontal structure cover inside the form of the ship resting about the hotel lays the Sky Garden. Load your beach chairs in to the dinghy and spin over towards the southeast shore of the Great Salt Pond to DinghyBeach as it\'s known to boaters and and anchor or pull it on shore for any walk across Corn Neck Road, through the beach grass to a 2 mile stretch of soft sand and pounding surf. During the weekends and holidays it is most crowded from the locales even though the tourists can be seen every day. Half day rentals are $40, and full day rentals are $6 Free lessons are given to beginners. This implies that when the publisher adds a brand new point of curiosity to the map (a new marina, pump out service, restrition etc) you may not know about this until you buy the revised version, usually at least annually later.

Food ranges in the sumptuous meals in first class restaurants for the good aroma of food in hawker centers. The time once you were running from one computer to a new for checking their state of certain utilities and applications and looking forward to complaints of the annoyed users is irrevocably gone. Even a mini-market and bank are present.

Yachts from all over north America and also the Caribbean come to port here to take pleasure from the world class marlin fishing and also to explore the beautiful Eastern coast of the Dominican Republic. There\'s a playground, video arcade, movie theater, bumper boats along with a swimming pool. Half day rentals are $40, and full day rentals are $6 Free lessons are given to beginners. The truly unique show has gone viral and clips can certainly be found on YouTube as well as other video sites, some even featuring child performers.

Each device can comprise one or more monitors. The rooms are complete using their oak, marble and leather furnishings, ironing board, hair dryer, large desk, art and window relax area, and everything is build with quality in mind. If you were to raise the foot end of your bed, you might also achieve this inside your sleep.

Starting at Abergavenny Castle you may then ride a thirty two mile path that leads towards the four Norman castles. If you\'re coming by boat, stay awhile on the Great Salt Pond. Great Seats for Branson shows tickets at yakovbransonmoshows.

Pure Treatment To Cease Cellulite


Caffeine. I am in a position to reassure people of which every certainly one of them wish to lessen cellulite, and fast! Unfortunately, a large amount of women are looking for magic treatment in addition to finish up losing a ton of money upon scammy cellulite creams together with other gimmicks. Still, a lot of women hate it, as it means they are feel unattractive and self-conscious.

According to health and fitness experts, cellulite removal exercises are ideal for everyone. When there is retention of fluid inside the body, usually because of hormonal changes brought on by various factors like puberty, pregnancy, or menopause, it has the consequence of fat cells not being released from these pockets, with all the result that the pockets store all the fat cells which come their way. When there\'s retention of fluid within the body, usually because of hormonal changes brought on by various factors like puberty, pregnancy, or menopause, it has the effect of fat cells not being released from these pockets, using the http://productiveveget50.snack.ws/cellulite-reduction-therapy-endermologie-tucson.html result that the pockets store every one of the fat cells that come their way. Nonetheless, doctors also think progesterone plays a big role for your reason that it\'s responsible pertaining for an rise in weight, holding onto any water, and weak veins.

You must realize that you have to shed fat to have rid of cellulite. Using a treadmill in the home is every bit effectual. Experts think that estrogen performs an element since it\'s seen to encourage body fat to cultivate around the specific locations where cellulite develops. Experts believe that estrogen performs an element since it\'s seen to encourage body fat to grow around the specific locations where cellulite develops. Yoga can be good for detoxifying your body and regulating our bodies functions.

Choose a reliable plastic surgery center with a plastic surgeon who is skilled and experienced in providing Cellulaze cellulite treatment. Lie recorded on a flat, firm, surface and position your legs upwards towards the ceiling at 90 degrees. , creams and lotions--DermBoutique brings together some of the best, most effective cellulite treatments on the market. It helps as well increase circulation and prevent fluid retention, both of which help your body purge the synthesized fat cells out of your system.

Doctors also think hormones perform an aspect in deciding if you will get dimply skin upon the legs. You might also find some over-the-counter remedies. If you are not so keen on weight exercises select free squats and lunges that might help you receive rid of cellulite. While the main reason that causes it to be much more visible in some women are not fully understood, age, diet, and physical activity play a big role, along with your genes. Simply no physically demanding cardio essential.

Step up together with your right foot. While the reason why that can make it far more visible in certain women aren\'t fully understood, age, diet, and physical activity play a big role, along with your genes. Natural Ingredients.

Disclaimer: This article is made for informational purposes only, and should not be used as a native to expert medical advice. Lie recorded on a flat, firm, surface and position your legs upwards towards the ceiling at 90 degrees. If you would like to know how to get rid of cellulite this really is definitely an ingredient that promotes a firmer smoother skin. Lie down on a flat, firm, surface and http://www.youtube.com/watch?v=OV5m1qznQnw position your legs upwards towards the ceiling at 90 degrees. Minimizing Cellulite at Home.

Discovering The Marina Bay Sands In Singapore


People often don\'t understand how damaging it is to sit or even stand throughout the day long. There are lots of great places throughout the country and around the planet which may be enjoyed having a bike ride. Many people see which they get swollen feet and legs as a consequence of it.

This disused railway line is fantastic for kids and families. Another great course to adopt may be the Marlborough to Coate Water Country Park. You can begin to see the colonies of fishermen on both the shores despite strong waves of the water. You need to set your feet in a height of at least 6 inches above your heart level. Try Total Network Monitor now and glance at the benefits of new solution from Softinventive Lab.

Next marina to starboard is the \"BoatBasin\" with 85 transient guest slips with accommodation for up to 110 feet, LOA. softinventive. The animal show after wards just about caps the night.

This will be the reason behind the city being famous among the tourists. There\'s a playground, video arcade, movie theater, bumper boats and a swimming pool. If you\'re from your personal computer where Total Network Monitor is running you can still find out if something goes wrong. This is necessary to protect your veins.

You will discover numerous benefits associated with this sort of daily life getting the daybreak coffee using the odor of the salt air and watching the neighborhood dolphins cruise by your vessel to cover http://en.wikipedia.org/wiki/Marina two! But prior to jumping in head first here are several things to consider into account. Beach cricket and kites flying in the air are typical sights in Marina Beach. What remains to become seen however, is just how long will it remain the prime location of UAE, since Dubai is well known for dishing out similar landmarks on a normal interval.

LTD Paddleboarding in Scottsboro offers http://wallinside.com/post-59017-keeping-your-boat-ship-shape.html an native to canoeing and kayaking. Singapore has the most efficient public transport or perhaps a limo cab to consider you to definitely places. There\'s plenty to see and do and you may not will need to go far to discover something to help keep you engaged and entertained.

The Human Slinky Sells Branson Tickets


Samos Marina Pythagorion - where To Discover The Best Yachts To Rent by Christos Margetis Samos Marina in Pythagorion is a 3 year old constructed marina, and it comes with an almost 300 yachts capacity from small and medium yachts to really big motor yachts of around 170ft. A lot of people these days choose riding bikes for commuting to work and back or to get fit, but it is also a fantastic hobby which may be enjoyed by almost anyone. Cycling with friends or family can be a great way to socialise, get fit and explore your surroundings. But there\'s more to it than that. Whether flying into Singapore, or coming by boat, bus or train you can\'t miss this architectural masterpiece.

I have a comprehensive review in my site of what exactly is widely considered the http://wallinside.com/post-59017-keeping-your-boat-ship-shape.html best digital map available for that British, Irish and French canal networks. Notable appearances include America\'s Got Talent, The David Letterman Show, and many performances on college basketball halftime courts. If you\'re coming by boat, stay awhile around the Great Salt Pond. What remains to become seen however, is how long will it remain the prime location of UAE, since Dubai is well known for dishing out similar landmarks on a normal interval.

The tower is expected being available by the year 20There isn\'t any argument in regards to the excitement Dubai Marina holds as well as the commerce it could generate. The time whenever you were running from one computer to a new for checking hawaii of certain utilities http://www.imdb.com/title/tt0928097/ and applications and awaiting complaints of the annoyed users is irrevocably gone. 904/556-9431.

Below you have a nice link of an aerial photo in places you can observe how the marina looks like. There\'s a playground, video arcade, movie theater, bumper boats and a swimming pool. Half day rentals are $40, and full day rentals are $6 Free lessons are given to beginners. Your each network monitoring project includes three important object groups: devices, monitors and actions.

However, the video version pales compared to seeing Pavlina the Human Slinky live. Children weighing less than 50lbs aren\'t permitted. This means that in the big event the publisher adds a brand new point of interest towards the map (a new marina, pump out service, restrition etc) you may not know about it until you buy the revised version, usually no less than annually later.

The Marina Sands Hotel in Singapore is really a leading business, leisure and entertainment destination, surrounded with a casino, theater, shopping mall, convention center, museum and much more. They rent stand up paddleboards on Lake Guntersville, at Goose Pond Colony beach. The Sands guarantees a fun outing for the family and try to has great hotel deals on offer.

Samos Yacht Charters At Samos Marina Pythagorion


People often don\'t get how damaging it is to sit or even stand all day long long. Many people see they get swollen feet and legs as a consequence of it. Many people discover that they get swollen feet and legs as a result of it.

Three enormous hotel towers arise in the Marina Bay, placed together with these three mega pillars another horizontal structure cover in the form of the ship resting around the hotel lays the Sky Garden. Load your beach chairs to the dinghy and spin over for the southeast shore of the Great Salt Pond to DinghyBeach as it\'s proven to boaters and and anchor or pull it up on shore to get a walk across Corn Neck Road, through the beach grass to a two mile stretch of soft sand and pounding surf. During the weekends and holidays it is most crowded through the locales while the tourists can be seen every day. These vessels are made with 2 hulls. Support stockings can also be very beneficial.

You will possess a great deal of decisions Marina which you will be needing to before finding and purchasing your new power yacht. softinventive. For all the latest celebrity news, celebrity gossip, celebrity photos and celebrity style please visit Orange.

What remains being seen however, is just how long will it remain the prime location of UAE, since Dubai is well known for dishing out similar landmarks on a regular interval. You have usage of almost unlimited information which is often regularly d. Girls Aloud\'s Nicola Roberts stuck several of her (possibly goth) mum\'s tea cosies together http://disney.wikia.com/wiki/Marina to produce a dress, as well as the less said about new popstrel about the block Marina Diamandis\' disastrous yellow... thing, the better.

Local Delights in One Spot. Single hulled yachts are the long-established style of vessels made by most boat builders for hundreds of years. when you are actually on your own boat on a canal. First we will start using the Forest of Dean cycleway.

There\'s so far more to discover at the Marina Bay Sands. Similarly, accommodation wise, you\'ve the option budget hostels towards the luxurious 6 star hotels. Try Total Network Monitor now and have the features of new solution from Softinventive Lab.

Eradicating Cellulite With Exercising - is It Truly Possible?


Aging, genetics, hormones, and sudden weight fluctuations are a few of the factors in charge of cellulite, the lumpy, dimpled skin seen around the thighs, hips and buttocks on most post-pubescent women. However, cellulite does not appear in a single day or two, it requires a large amount of time. Still, a lot of women hate it, as it ensures they are feel unattractive and self-conscious.

Step up along with your right foot. They can do anything whatsoever at all to lessen cellulite. Is there really any reliable, effective method to eliminate cellulite? Is it necessary to resort to expensive surgery, spa treatments, or medical procedures? Or can cellulite cream bring the specified results? Sites like DermBoutique have brought together information and reviews on several available cellulite treatments to assist you find what really works.

For more details about Cellulite Cream and Cellulite Lotion visit my website. Many folks are actually decreasing cellulite by method of using certainly one of these creams and although they\'re best found in conjunction with http://cellulitiscure.com other natural means, they definitely do supply help when attempting to reduce cellulite. Take a four position bend your body towards the floor with your palms touching the ground. Many people are actually decreasing cellulite by means of using certainly one of these creams and although they\'re best used in conjunction with other natural means, they definitely do supply help when attempting to reduce cellulite. Utilize the cream twice daily for max results.

Yoga has a strengthening effect about the body, toning up the large thigh and buttock muscles, and building lean muscle which burns up fat more effectively. Doctors believe being pregnant brings about cellulite since it results in the woman\'s body to modify to support her infant. Causes of Cellulite During Pregnancy.

Causes of Cellulite During Pregnancy. As mentioned before the goal would be to remove toxins and lumpy fat cells from your body which promote the look of cellulite. This is the biggest mistake you can do. While these do work, the outcomes are usually temporary, with all the cellulite coming back because of the not enough real changes made for the lifestyle. The result\'s smoother and much more even looking skin.

Step up with your right foot. They can do anything whatsoever at all to lessen cellulite. Stand before the platform.

Apart from following the above exercises, get adequate rest by sleeping 8 hours a day. This does wonders to get rid of cellulite and used regularly will provide remarkable results to diminish the look of cellulite. If you would like to know how you can get rid of cellulite this really is definitely an ingredient that promotes a firmer smoother skin. This does wonders to have rid of cellulite and used regularly will provide remarkable results to lower the look off cellulite. Disclaimer: This article is perfect for informational purposes only, and really should not be used as a http://www.liverdoctor.com/cellulite/ replacement for expert medical advice.

Marina Bay Sands Hotel Singapore - Excellent Travel Hotel


Samos Marina Pythagorion - Where You Can Discover The Best Yachts To Rent by Christos Margetis Samos Marina in Pythagorion can be a 3 year old constructed marina, and it has an almost 300 yachts capacity from small , medium yachts to really big motor yachts of around 170ft. A lot of people these days choose riding bikes for commuting to work and back in order to get fit, however it can also be an excellent hobby which can be enjoyed by almost anyone. A great deal of people these days choose riding bikes for commuting to work and back or get fit, nevertheless it can also be a fantastic hobby which Marina is often enjoyed by almost anyone. Cycling with friends or family is a great method to socialise, get fit and explore your surroundings. Whether flying into Singapore, or coming by boat, bus or train you can\'t miss this architectural masterpiece.

Starting at Abergavenny Castle you may then ride a thirty two mile path that leads to the four Norman castles. However, at times, surgery may be the sole solution. You can begin to see the colonies of fishermen on both the shores in spite of strong waves of the water. You need to set the feet with a height of a minimum of 6 inches above your heart level. It\'ll take the most a part of the day to tour the complete zoo when your day is done, you\'ll remember this nice piece of advise.

The hotel rooms at The Sands are robust, warm and luxurious. softinventive. For all the latest celebrity news, celebrity gossip, celebrity photos and celebrity style please visit Orange.

Furthermore, it may cause smelly feet and athlete\'s foot. Great views can be observed over the way and it can also be ideal for bird watchers. South Indian snacks, ice creams along with other delicious food items available within the food stalls located at the vicinity of the beaches may serve as refreshments after exploring the different elements of Marina Beach. For designer items and also the not so known labels, Orchard Road may be the destination to be.

You should notice that putting you up feels good immediately. She shoots out branches of the slinky to a amazing length and then draws it well again, all done for an appropriate electronically generated techno-beat. Half day rentals are $40, and full day rentals are $6 Free lessons are given to beginners. Girls Aloud\'s Nicola Roberts stuck a few of her (possibly goth) mum\'s tea cosies together to produce a dress, and also the less said about new popstrel about the block Marina Diamandis\' disastrous yellow... thing, the better.

Below you\'ve a nice link of an aerial photo in places you can observe how the marina looks like. Weekday rentals are $10 per hour, and weekend rentals are $15 per hour. You can make sure I\'ll be heading back there to consider in really http://www.ci.marina.ca.us/ this modern resort on this equally modern city of Singapore.

Things To Take Into Account In Searching For Cellulite Creams


Caffeine. However, cellulite does not appear in a day or two, it requires a great deal of http://cellulitecreamguide.net/ time. Still, many women hate it, since it ensures they are feel unattractive and self-conscious.

unpleasant skin. To truly minimize cellulite you should targeted the key leads to, as opposed for the signs. Some people even decide to practice dancing or aerobic exercises, which are exciting too. You can combine resistance training exercises like squats along with cardio since these exercises specifically focus on the cellulite affected areas. Eliminating fat and increasing collagen assist the body fill inside the dimples and pits characteristic of cellulite deposits, giving your body the smooth, fit look you\'ve always wanted.

For eliminating cellulite, you have to indulge in physical exercises at least 4 times a week, in sessions of 20-30 minutes. Meditation and yoga assist in relieving stress along with a relaxed body and mind adds to overall health. Yoga could be very helpful in improving body functions and helps in eliminating lethargy. Ask your medical professional in the event you be not really persuaded.

Yoga includes a strengthening effect on the body, toning up the large thigh and buttock muscles, and building lean muscle which burns up fat more effectively. Since the pockets fill up, they begin bulging, which results within the characteristic dimpling due to cellulite. Causes of Cellulite During Pregnancy.

Causes of Cellulite During Pregnancy. Possibly most fascinating to make note of is liposuction surgery, folks felt remedied dimply skin. If you might be not so partial to weight exercises go for free squats and lunges that might help you obtain rid of http://cellulitiscure.com cellulite. While the reason that can make it a lot more visible in a few women are not fully understood, age, diet, and physical activity play a huge role, along together with your genes. Nonetheless, doctors also think progesterone plays a huge role for that reason that it\'s responsible pertaining for an rise in weight, holding onto any water, and weak veins.

Yoga is definitely an age-old practice, using its origins in India. Then again, once you can afford a small month-to-month expense, then undoubtedly go for that simplest & fastest option of all, anti cellulite cream. When there\'s retention of fluid inside the body, usually because of hormonal changes caused by various factors like puberty, pregnancy, or menopause, it has the effect of fat cells not being released from these pockets, with the result that the pockets store all the fat cells that can come their way. This certainly decreases the look off cellulite orange peel skin.

Disclaimer: This article is made for informative purposes only. Make healthier food choices to eat fresh fruits and vegetables, drinking green tea, etc. If you need to know how to get rid of cellulite this can be definitely an ingredient that promotes a firmer smoother skin. This does wonders to have rid of cellulite and used regularly will provide remarkable results to decrease the look off cellulite. Utilize the cream twice daily for optimum results.

Total Network Monitor Is Surely An All-Seeing Eye for Your LAN


Riding a bicycle can be an enjoyable experience for many. Many people find which they get swollen feet and legs as a result of it. A large amount of individuals have thought about getting out of the hustle and bustle of everyday routine to a life aboard a traveling power yacht using the intention to rehearse a less complicated means of life and observe the world from another viewpoint.

Most of the show can be a circus-based entertainment that follows the adventures of Andrei the Clown and his awesome true love, Marina the ballerina, as they journey from Russia to America. Load your beach chairs into the dinghy and spin over to the southeast shore of the Great Salt Pond to DinghyBeach as it\'s known to boaters and and anchor or pull up on shore for a walk across Corn Neck Road, through the beach grass to a two mile stretch of soft sand and pounding surf. During the weekends and holidays it is most crowded from the locales as the tourists can be seen every day. These vessels are designed with 2 hulls. Many insurance firms want to visit a survey which is another reason to have one done before you decide to buy unless the vendor can provide you with one completed with inside the this past http://marina.com/ year or so.

The amount of space being generated by this building will be unparalleled anywhere in or outside Dubai. Maximum length here is 300 feet, LOA. Total Network Monitor allows you to monitor lists and customize them as much as possible based on your needs.

Speaking of which... Elton John\'s been waving his Irritant Stick around as well, this time proclaiming to a US magazine that Jesus was gay. You have use of almost unlimited information that is often regularly d. Marina Bay Sands Expo and Convention Center.

Main task of such tools is to provide maximum effectiveness of network performance and to reduce costs for hardware and software upgrades. Beach cricket and kites flying within the air are common sights in Marina Beach. \"Undulating\" is the only real word to come close to describing her maneuvers with the more-than-life-sized Slinky costume.

If you need to know in which you might http://www.getjealous.com/quackvacuum2285/journal/3875271/keeping-your-boat-ship-shape.html be around the waterways and what\'s around you, an electronic canap map can be a must. They rent fully stand up paddleboards on Lake Guntersville, at Goose Pond Colony beach. Visit the Paradise Yachts web site to view our collection of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale.

Best Anti Cellulite Workout Routines - Simple And Easy , Effective


Cellulite (fatty tissue) is really a problem that many people living in urban areas have problems with and which many find difficult to get rid of. However, even when one can afford liposuction, one has to still have a good diet and exercise regimen to maintain our bodies shape post liposuction. So, to eliminate cellulite, the very first step is always to have the lymph moving, which also ensures that waste fluids are dumped of the body. In a nutshell cellulite is straightforward fats deposits locked in pockets slightly below the skin.

embarrassed about your leg and thigh cellulite. With a cushion between your legs, bring your thighs closer to one another and squeeze the pillow just as much when you can till you have the inner thigh muscles getting stiffened up. Some people even elect to practice dancing or aerobic exercises, which are exciting too. You can combine strength training exercises like squats together with cardio since these exercises specifically concentrate on the cellulite affected areas. This may be the solely verified treatment for decrease lumpy skin for great, as against merely spanning it way up.

Does exercise get rid of cellulite? Well, it undoubtedly does. A great deal of experts believe estrogen and progesterone are to blame pertaining towards the development of dimpled skin, which could help explain precisely why cellulite is located in the lot more females as opposed to adult men. Cellulite is due to fat build-up under your skin due to excess fat consumption that the body fails to metabolize, excess production of adrenaline due to several factors such as stress or poor genetic makeup. Products to help get rid of cellulite should contain capsicum and caffeine which certainly are a powerful combination which will increase your blood circulation very effectively.

Plan your workout regimen based on your schedule, and follow these exercises religiously to eliminate cellulite from your body and life. Doctors believe being pregnant brings about cellulite since it results in a woman\'s body to modify to allow for her infant. Cutting down on the foods that are going to add for the fat and toxins inside your body, and switching to a diet that is planning to help reduce the appearance of cellulite, could possibly be certainly one of the easiest and most natural ways to get the great looking skin you want.

While you will find indeed many other treatments that can lessen the outcomes of cellulite, these usually just work superficially, helping the skin to mask the fat. Some patients that are extremely overweight and obese may be advised to undergo liposuction, a procedure that involves removing fat deposits. Some patients who are extremely overweight and obese may be advised to undergo liposuction, a procedure which involves elimination of fat deposits. Cellulaze Cellulite Treatment - Many Benefits.

Horsetail Extract is a special herb which is rich in silica which is an essential component of your connective tissues. Green tea can be used orally or perhaps is use within topical formulations which are effective for burning fat cells too as prevention for storage of recent fat. When there is retention of fluid within the body, usually because of hormonal changes caused by http://www.slideshare.net/pastoralsolace530/how-to-get-rid-of-cellulite-47695836 various factors like puberty, pregnancy, or menopause, it has the result of fat cells not being released from these pockets, with the result that the pockets store every one of the fat cells that come their way. Though you is probably not able to obtain rid of it completely, you will find ways where you can minimize it and improve your skin\'s appearance.

Apart from following the above mentioned exercises, get adequate rest by sleeping 8 hours a day. In the event you\'re on a decent finances, your greatest guess is always to go together with all the free cures listed close for the top. In the big event you\'re on a decent finances, your greatest guess is always to go together with all the free cures listed close towards the top. Make healthier food choices by eating fresh fruits and vegetables, drinking green tea, etc. You are going being amazed at the results you achieve using these easy workouts http://www.webmd.com/beauty/cellulite/cellulite-causes-and-treatments coupled having a healthy nutritious diet.

Discovering The Marina Bay Sands In Singapore


One of the very most impressive structures I\'ve seen and visited in Singapore will be the Marina Bay Sands, a deluxe hotel and casino recently built on this Island City. A lot of people these days choose riding bikes for commuting to work and back or to get fit, however it is also an excellent hobby which can be enjoyed by almost anyone. Cycling with friends or family is a great approach to socialise, get fit and explore your surroundings. Cycling with friends or family is really a great approach to socialise, get fit and explore your surroundings. Whether flying into Singapore, or coming by boat, bus or train you can\'t miss this architectural masterpiece.

Most of the show can be a circus-based entertainment that follows the adventures of Andrei the Clown and the true love, Marina the ballerina, as they journey from Russia to America. Load your beach chairs into the dinghy and spin over for the southeast shore of the Great Salt Pond to DinghyBeach as it\'s known to boaters and and anchor or pull up on shore to get a walk across Corn Neck Road, through the beach grass to a 2 mile stretch of soft sand and pounding surf. During the weekends and holidays it is most crowded from the locales as the tourists can be seen every day. These vessels are designed with 2 hulls. There is a very qualified yacht repair and maintenance team(as I believe those are the best yacht repair and maintenance team within the whole Aegean) that can also move, helping yachts on place or even in other islands, wherever the issue arises.

Starting at Abergavenny Castle you may then ride a thirty two mile path which leads for the four Norman castles. The time whenever you were running from one computer to a different for checking hawaii of certain utilities and applications and awaiting complaints of the annoyed users is irrevocably gone. Additionally, the very outlook of Marina 101 goes being fabulous, with the outer layer being made of glass as well as the summit to become made to look like as a glowing crown.

Furthermore, it can cause smelly feet and athlete\'s foot. Traffic free paths, back roads, moors and mountains are https://www.kiwibox.com/imminentwr090/blog/entry/126233581/who-needs-a-trailer-puller/ all covered on this route. South Indian snacks, ice creams along with other delicious foods available in the food stalls located at the vicinity of the beaches serves as refreshments after exploring the different elements of Marina Beach. This implies that in the event the publisher adds a new point of interest towards the map (a new marina, pump out service, restrition etc) you will not know regarding it until you buy the revised version, usually no less than a year later.

Marina Bay is the business enterprise center of Singapore. If you are successful in http://www.ci.marina.ca.us/index.aspx?NID=240 securing a mooring, the harbormaster (CH 12) will find you together with collect the $40/night fee. With an eight mile journey this is a great route for novices to take.

Starting at Abergavenny Castle you may then ride a thirty two mile path which leads for the four Norman castles. Similarly, accommodation wise, you have the decision budget hostels towards the luxurious 6 star hotels. Try Total Network Monitor now and have the features of new solution from Softinventive Lab.

Paddling The Waters Of Northeast Alabama


Riding a bicycle can be a satisfying experience for many. Many http://www.nexopia.com/users/uppityalle119/blog/20-this-old-boat-ranking-boats people see which they get swollen feet and legs as a results of it. Whether flying into Singapore, or coming by boat, bus or train you can\'t miss this architectural masterpiece.

Three enormous hotel towers rise in the Marina Bay, placed together with these three mega pillars another horizontal structure cover inside the form of a ship resting about the hotel lays the Sky Garden. Load your beach chairs into the dinghy and spin over for the southeast shore of the Great Salt Pond to DinghyBeach as it\'s recognized to boaters and and anchor or pull up on shore for a walk across Corn Neck Road, through the beach grass to a 2 mile stretch of soft sand and pounding surf. During the weekends and holidays it is most crowded through the locales while the tourists can be observed every day. These vessels are designed with 2 hulls. Many insurance providers want to visit a survey which can be one other reason to possess one done prior to deciding to buy unless the owner can give you one done with in the last year or so.

OFFLINE DIGITAL MAPS. softinventive. You also have an opportunity to check any aspect of this or that utility, server or file system: HTTP, FTP, SMTP/POP3, IMAP, Event Log, Service State, Registry and several other.

What remains to become seen however, is how long will it remain the prime location of UAE, since Dubai known for dishing out similar landmarks on an everyday interval. A two person canoe rents for $40, along with a single kayak rents for $2 Rentals include paddles, PFDs, and shuttle transportation. Along the path you will find old train stations, forests, sculpture trails and http://marina.com/ several more sights that have to be seen to become appreciated.

Many insurance firms want to visit a survey that is another reason to possess one done before you buy unless the seller can provide you with one completed with inside the last year or so. The rooms are complete using their oak, marble and leather furnishings, ironing board, hair dryer, large desk, art and window relax area, and everything is build with quality in mind. Do also make certain that your situation is ergonomically smart once you sit.

I provided you having an abridged preview of what you might expect on a trip to Block Island, there is however lots more. Singapore has the most efficient public transport or perhaps a limo cab to consider you to places. Visit the Paradise Yachts web site to view our choice of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale.

How to Get Rid of Cellulite Fast


The Truth About Cellulite

If you're seeing bumps on your behind, you're in good company: About 90 percent of women -- and virtually no men -- have cellulite, fat cells found underneath the top layer of the skin that have squeezed between bands of connective tissue, or collagen, attaching your muscle to your skin. While the structure of women's connective tissue is vertical (like mattress springs), men's collagen is angled, which means that fat cells don't push through and pucker as much. Dermatologists believe that poor circulation, which is primarily genetic (thanks, Mom and Dad!), can exacerbate the look of lumps. "When blood flow slows, collagen separates, allowing fat to come up to the surface of the skin, creating an orange-peel effect," says Howard Murad, MD, a FITNESS advisory board member and author of The Cellulite Solution.

This puckering can mess with your confidence: In a FITNESS survey, readers ranked cellulite as their number-one beauty bummer (above acne, frizzy hair, and wrinkles). Fifty-seven percent of women have worn clothing over their bathing suits to camouflage it, according to a study commissioned by Nivea. While there is no cure (sadly!), derms believe it's possible to temporarily camouflage bumps. So before you grab that sarong, here's the skinny on the latest potions that firm.



Watch: The 5-Minute Butt Workout

The Hot Legs Workout

Easy Exercises to Stop Cellulite

101541335_ex_w.jpgSmooth Operators

Cellulite busters aim to help tone your skin and minimize lumps by drawing out excess moisture that can become lodged between bands of collagen. The newest ones also have multiple benefits. FITNESS readers tested them so that you can get the best butt for your buck.



Product: St. Ives Cellulite Shield Gel Creme ($6.99, drugstores)

Mission: Firm and cool

Claim: Laced with cooling menthol and depuffing caffeine, this gel also contains green tea to help soothe your skin.

Reality: "I have tried a few products before, and none worked. But with this, my trouble zones looked tighter after only one week." -- Jennie Blagg, Sherman Oaks, California

Product: Olay Quench Plus Firming Body Lotion ($6.99, drugstores)

Mission: Firm and hydrate

Claim: Ginseng extract in this lightweight product tones your skin, and petrolatum locks in softening moisturizers.

Reality: "I didn't see a significant change in my cellulite. But I'll keep using this lotion every day because it makes my skin very soft and keeps it moisturized for hours." -- Beth Prather, Pelham, New York

Product: Bliss FatGirlSleep ($38, blissworld.com)

Mission: Firm and induce sleep

Claim: Packed with calming lavender, this rich concoction uses lotus extract to help make lumps less noticeable.

Reality: "My dimples haven't disappeared, but the skin on my thighs appears somewhat firmer. Every little bit counts! Plus, the formula felt cooling after my nightly bath." -- Hope Teich, Wanaque, New Jersey

Product: Jergens Natural Glow Firming Daily Moisturizer ($8.99, drugstores)

Mission: Firm and self-tan

Claim: This lotion helps you build a bronze color gradually and tightens skin with elasticity-boosting ginseng.

Reality: "My thighs look smoother, and the golden brown tan makes my legs and butt look more muscular and toned. I'll be using this cream all summer." -- Angela Vetta, Brookfield, Wisconsin

Product: Rodial Skinny Beach SPF 15 ($49, rodialskincare.com)

Mission: Firm and protect

Claim: This sunscreen's vegetable collagen tones skin, and caffeine and peptides help reduce puckering.

Reality: "Unfortunately I didn't see a difference in my cellulite. But I really like the feel and the light, refreshing fragrance of this cream." -- Cathy Saragosa, Fresno, California

Watch: The 5-Minute Butt Workout

http://www.medicinenet.com/cellulite/article.htm href="http://www.fitnessmagazine.com/workout/thighs/exercises/hot-legs-exercises/" target="_blank">The Hot Legs Workout

Easy Exercises to Stop mercury outboards Cellulite

101541327_w.jpgLook Better from Behind

Three simple steps to improve your rear view.

Twice a Day: Slather on Lotion

The tightening effects of anticellulite creams start to diminish after six to eight hours, says Bill Johnson, MD, a cosmetic specialist in Dallas. Apply an additional layer at midday to extend the toning time.

Once a Day: Exfoliate

Creams and gels will penetrate the skin on your butt and thighs more deeply if you slough dead cells first, Dr. Johnson says. Sweep a natural-bristle brush over cellulite-prone areas before you hop into the shower.

Three Times a Week: Stretch It Out

Boosting circulation helps lessen lumps, says Howard Murad, MD. Get blood flow going: Lie on your back and extend legs. Bend your right leg and pull your knee into your chest. Hold 20 seconds; switch legs to do one rep. Repeat twice.

Watch: The 5-Minute Butt Workout

The Hot Legs Workout

Easy Exercises to Stop Cellulite

How to Get Rid of Cellulite Fast


The Truth About Cellulite

If you're seeing bumps on your behind, you're in good company: About 90 percent of women -- and virtually no men -- have cellulite, fat cells found underneath the top layer of the skin that have squeezed between bands of connective tissue, or collagen, attaching your muscle to your skin. While the structure of women's connective tissue is vertical (like mattress springs), men's collagen is angled, which means that fat cells don't push through and pucker as much. Dermatologists believe that poor circulation, which is primarily genetic (thanks, Mom and Dad!), can exacerbate the look of lumps. "When blood flow slows, collagen separates, allowing fat to come up to the surface of the skin, creating an orange-peel effect," says Howard Murad, MD, a FITNESS advisory board member and author of The Cellulite Solution.



This puckering can mess with your confidence: In a FITNESS survey, readers ranked cellulite as their number-one beauty bummer (above acne, frizzy hair, and wrinkles). Fifty-seven percent of women have worn clothing over their bathing suits to camouflage it, according to a study commissioned by Nivea. While there is no cure (sadly!), derms believe it's possible to temporarily camouflage bumps. So before you grab that sarong, here's the skinny on the latest potions that firm.

Watch: The 5-Minute Butt Workout

The Hot Legs Workout

Easy Exercises to Stop Cellulite

101541335_ex_w.jpgSmooth Operators

Cellulite busters aim to help tone your skin and minimize lumps by drawing out excess moisture that can become lodged between bands of collagen. The newest ones also have multiple benefits. FITNESS readers tested them so that you can get the best butt for your buck.

Product: St. Ives Cellulite Shield Gel Creme ($6.99, drugstores)

Mission: Firm and cool

Claim: Laced with cooling menthol and depuffing caffeine, this gel also contains green tea to help soothe your skin.

Reality: "I have tried a few products before, and none worked. But with this, my trouble zones looked tighter after only one week." -- Jennie Blagg, Sherman Oaks, California

Product: Olay Quench Plus Firming Body Lotion ($6.99, drugstores)

Mission: Firm and hydrate

Claim: Ginseng extract in this lightweight product tones your skin, and petrolatum locks in softening moisturizers.

Reality: "I didn't see a significant change in my cellulite. But I'll keep using this lotion every day because http://fitness.mercola.com/sites/fitness/archive/2013/04/19/cellulite-elimination.aspx it makes my skin very soft and keeps it moisturized for hours." -- Beth Prather, Pelham, New York

Product: Bliss FatGirlSleep ($38, blissworld.com)

Mission: Firm and induce sleep

Claim: Packed with calming lavender, this rich concoction uses lotus extract to help make lumps less noticeable.

Reality: "My dimples haven't disappeared, but the mercruiser skin on my thighs appears somewhat firmer. Every little bit counts! Plus, the formula felt cooling after my nightly bath." -- Hope Teich, Wanaque, New Jersey

Product: Jergens Natural Glow Firming Daily Moisturizer ($8.99, drugstores)

Mission: Firm and self-tan

Claim: This lotion helps you build a bronze color gradually and tightens skin with elasticity-boosting ginseng.

Reality: "My thighs look smoother, and the golden brown tan makes my legs and butt look more muscular and toned. I'll be using this cream all summer." -- Angela Vetta, Brookfield, Wisconsin

Product: Rodial Skinny Beach SPF 15 ($49, rodialskincare.com)

Mission: Firm and protect

Claim: This sunscreen's vegetable collagen tones skin, and caffeine and peptides help reduce puckering.

Reality: "Unfortunately I didn't see a difference in my cellulite. But I really like the feel and the light, refreshing fragrance of this cream." -- Cathy Saragosa, Fresno, California

Watch: The 5-Minute Butt Workout

The Hot Legs Workout

Easy Exercises to Stop Cellulite

101541327_w.jpgLook Better from Behind

Three simple steps to improve your rear view.

Twice a Day: Slather on Lotion

The tightening effects of anticellulite creams start to diminish after six to eight hours, says Bill Johnson, MD, a cosmetic specialist in Dallas. Apply an additional layer at midday to extend the toning time.

Once a Day: Exfoliate

Creams and gels will penetrate the skin on your butt and thighs more deeply if you slough dead cells first, Dr. Johnson says. Sweep a natural-bristle brush over cellulite-prone areas before you hop into the shower.

Three Times a Week: Stretch It Out

Boosting circulation helps lessen lumps, says Howard Murad, MD. Get blood flow going: Lie on your back and extend legs. Bend your right leg and pull your knee into your chest. Hold 20 seconds; switch legs to do one rep. Repeat twice.



Watch: The 5-Minute Butt Workout

The Hot Legs Workout

Easy Exercises to Stop Cellulite

Cellulite Reduction


cellulite-buttock

cellulite-buttock



Our cellulite reduction treatments smooth and contour any loose, wrinkled and dimpled skin anywhere on the body.

Cellulite is a skin condition

Cellulite appears when fat cells just under the skin swell or enlarge and the once flexible collagen bands become rigid and firm and no longer stretch properly. This cell structure change is what causes the dimpled skin known as cellulite.



How does it work?

The lasers http://wellnessmama.com/8608/natural-cellulite-remedies/ heat the dermis, your skin's inner layer. This targeted energy helps reorganize the cellular environment and stimulates your cells to produce new collagen. New collagen is what gives you the smooth texture and elastic quality of youthful skin. Depending on the sizes of the area(s) to be treated, a treatment may take up to 45 minutes.

Virtually pain free

Most people find these treatments very comfortable. Many clients describe the sensation as a warm massage.

The results

These treatments engines and boats for sale provide visible results because they use a "dual layer" approach. You'll feel your skin grow thicker, tighter and smoother.

Clients may see results immediately, over time and with follow up procedures as your skin tightens and new collagen develops.



Is it safe?

Our cellulite reduction treatments are completely safe and cleared by the FDA. The risk of serious side effects is extremely low.

This Old Boat - Ranking Boats


What You\'ll Need. Despite the proven fact that these older boats are bona fide antiques, does certainly not mean they will not have numerous years of good life left. Despite the undeniable fact that http://freshbeatband.wikia.com/wiki/Marina these older boats are bona fide antiques, does not always mean they is not going to have many years of excellent life left.

POOR - rating is provided to a cruiser that is described as a \"project boat\". Detergents containing phosphates may result in harm to aquatic life. Be ready to disburse a sizable price to achieve these fixes. Take time for you to rinse, clean and wax your boat regularly and your boat can keep ship shape for many years to come.

POOR - rating is provided to a cruiser which is described as a \"project boat\". Written maintenance records validate repetitive enhancements and service by her owner. Everything runs. Isinglass and canvas is functional however it\'s going to require replacing before long. Whatever drying method you choose, be certain to remove water ahead of the water spots appear.

Wax Your Boat. Detergents containing phosphates may bring about damage to aquatic life. Domestic cleaning solutions have quite high alkaline levels and will strip the wax off your boat\'s hull a lot faster than a specialist marine soap. Each boat is ranked based upon the reported shape, current equipment and/or a personal evaluation of the yacht. Turn-key! This type of vessel is incredibly unusual.

If you manage a big warehouse full with all of sort of heavy equipment, you can work with a trailer pusher to move them around. They eliminate health related problems that utilized to appear from straining the boats for sale body to push or pull different gear. The relatively small compact pushers can be used for boats and trailers and other vehicles weighting approximately 20,000 lbs. With the trailer pushers or pullers you only need one person that knows how you can operate the machine, and he does not need to complete any lifting, pulling or pushing.

How to Get Rid of Cellulite Fast


The Truth About Cellulite

If you're seeing bumps on your behind, you're in good company: About 90 percent of women -- and virtually no men -- have cellulite, fat cells found underneath the top layer of the skin that have squeezed between bands of connective tissue, or collagen, attaching your muscle to your skin. While the structure of women's connective tissue is vertical (like mattress springs), men's collagen is angled, which means that fat cells don't push through and pucker as much. Dermatologists believe that poor circulation, which is primarily genetic (thanks, Mom and Dad!), can exacerbate the look of lumps. "When blood flow slows, collagen separates, allowing fat to come up to the surface of the skin, creating an orange-peel effect," says Howard Murad, MD, a FITNESS advisory board member and author of The Cellulite Solution.

This puckering can mess with your confidence: In a FITNESS survey, readers ranked cellulite as their number-one beauty bummer (above acne, frizzy hair, and wrinkles). Fifty-seven percent of women have worn clothing over their bathing suits to camouflage it, according to a study commissioned by Nivea. While there is no cure (sadly!), derms believe it's possible to temporarily camouflage bumps. So before you grab that sarong, here's the skinny on the latest potions that firm.

Watch: The 5-Minute Butt Workout

The Hot Legs mercury outboards Workout

Easy Exercises to Stop Cellulite

101541335_ex_w.jpgSmooth Operators

Cellulite busters aim to help tone your skin and minimize lumps by drawing out excess moisture that can become lodged between bands of collagen. The newest ones also have multiple benefits. FITNESS readers tested them so that you can get the best butt for your buck.

Product: St. Ives Cellulite Shield Gel Creme ($6.99, drugstores)

Mission: Firm and cool

Claim: Laced with cooling menthol and depuffing caffeine, this gel also contains green tea to help soothe your skin.

Reality: "I have tried a few products before, and none worked. But with this, my trouble zones looked tighter after only one week." -- Jennie Blagg, Sherman Oaks, California

Product: Olay Quench Plus Firming Body Lotion ($6.99, drugstores)

Mission: Firm and hydrate

Claim: Ginseng extract in this lightweight product tones your skin, and petrolatum locks in softening moisturizers.

Reality: "I didn't see a significant change in my cellulite. But I'll keep using this lotion every day because it makes my skin very soft and keeps it moisturized for hours." -- Beth Prather, Pelham, New York

Product: Bliss FatGirlSleep ($38, blissworld.com)

Mission: Firm and induce http://www.amazon.com/s?ie=UTF8&page=1&rh=i%3Aaps%2Ck%3Acellulite sleep

Claim: Packed with calming lavender, this rich concoction uses lotus extract to help make lumps less noticeable.

Reality: "My dimples haven't disappeared, but the skin on my thighs appears somewhat firmer. Every little bit counts! Plus, the formula felt cooling after my nightly bath." -- Hope Teich, Wanaque, New Jersey

Product: Jergens Natural Glow Firming Daily Moisturizer ($8.99, drugstores)

Mission: Firm and self-tan

Claim: This lotion helps you build a bronze color gradually and tightens skin with elasticity-boosting ginseng.

Reality: "My thighs look smoother, and the golden brown tan makes my legs and butt look more muscular and toned. I'll be using this cream all summer." -- Angela Vetta, Brookfield, Wisconsin

Product: Rodial Skinny Beach SPF 15 ($49, rodialskincare.com)

Mission: Firm and protect

Claim: This sunscreen's vegetable collagen tones skin, and caffeine and peptides help reduce puckering.

Reality: "Unfortunately I didn't see a difference in my cellulite. But I really like the feel and the light, refreshing fragrance of this cream." -- Cathy Saragosa, Fresno, California

Watch: The 5-Minute Butt Workout

The Hot Legs Workout

Easy Exercises to Stop Cellulite

101541327_w.jpgLook Better from Behind

Three simple steps to improve your rear view.

Twice a Day: Slather on Lotion

The tightening effects of anticellulite creams start to diminish after six to eight hours, says Bill Johnson, MD, a cosmetic specialist in Dallas. Apply an additional layer at midday to extend the toning time.

Once a Day: Exfoliate



Creams and gels will penetrate the skin on your butt and thighs more deeply if you slough dead cells first, Dr. Johnson says. Sweep a natural-bristle brush over cellulite-prone areas before you hop into the shower.

Three Times a Week: Stretch It Out

Boosting circulation helps lessen lumps, says Howard Murad, MD. Get blood flow going: Lie on your back and extend legs. Bend your right leg and pull your knee into your chest. Hold 20 seconds; switch legs to do one rep. Repeat twice.

Watch: The 5-Minute Butt Workout

The Hot Legs Workout

Easy Exercises to Stop Cellulite



How to Get Rid of Cellulite


Although working out and eating right help you feel good and improve your health, there's no doubt that most of us also do so to improve our appearance. And with shorts and swimsuit season quickly approaching, cellulite might be on the minds of many, particularly women--80% of whom report having at least a little cellulite.



With so many products on the market promising to drastically reduce the appearance of cellulite or remove it altogether, it's tempting to pick up a bottle and just hope that it takes away that uneven and dimpled surface of the skin. But, wait! Before investing your hard-earned cash in some overnight solution that sounds too good to be true, do a little homework first--and find out what really works when it comes to preventing and reducing the appearance of cellulite.

What Is Cellulite?

Cellulite is formed by fibrous connective cords that connect your skin to your underlying muscle. In between these cords are your fat cells, and as your fat cells accumulate, they push up against your skin, while at the same time, the connective cords pull down. This pulling and pushing under your skin creates an http://www.cellulitetreatment.org/ uneven surface or dimpling that has the texture of cottage cheese or an orange peel. Because cellulite is more concentrated in areas that have a higher fat content, most women have some degree of cellulite on their thighs, hips and rear, but it can also be found on the breasts, lower abdomen and upper arms.

Why Some Have More Cellulite Than Others

Many factors play a role in cellulite, including your sex. Although men can and do have cellulite, it's more common in women due to their genetic make-up and higher levels of body fat (compared with men). Age, weight and lifestyle also play a role. As you age and your skin becomes looser, you may notice more cellulite on your body--even if your weight or body fat percentage remains unchanged. Weight gain can also make cellulite engines and boats for sale more noticeable, as can being inactive, enduring high levels of stress and, according to the Mayo Clinic, using hormonal contraceptives.

However--and here's the kicker--lean individuals can still have cellulite. Much of cellulite is actually genetic, so if it tends to run in your family, you may be more likely to have it regardless.

+Cellulite.jpg" width="328" />

Natural Ways to Treat Cellulite

So you have some cellulite. Is there anything you can do about it? The following healthy lifestyle habits have been shown to help reduce the appearance of cellulite.

Lose weight. Although you may not be able to get rid of cellulite completely, when you lose body fat by exercising and eating a healthy diet, you can greatly improve the appearance of dimpled skin because you'll have less fat pushing up against your skin.

Resistance train. There is no such thing as spot training (losing fat in a specific body area by exercising it), but by strengthening and building your muscles--particularly in areas where you carry cellulite--you can give your skin a more even texture and tone.

Do cardio. Aerobic exercise is a fantastic way to burn calories and burn fat, thereby reducing the size of fat cells under the skin. Plus, aerobic exercise can also help you lose weight!

Eat a healthy diet. Eating a diet full of fruits, vegetables, lean proteins, healthy fats and whole grains can give your body the essential vitamins and minerals it needs to properly burn fat and keep your skin and tissues healthy. In fact, healthy proteins from nuts, beans and fish, and antioxidant-rich green tea, berries and garlic can help build up collagen--a connective tissue that helps plump up the skin and makes the signature peaks and valleys of cellulite less extreme. A healthy diet full of vitamin C, vitamin E and omega-3 fatty acids can also improve skin texture.

Stay hydrated. Drinking enough water is an easy way to improve the texture of your skin. It seems counterintuitive, but by drinking more fluid, your body actually releases excess fluid that you may have been holding onto (including in your cellulite-prone areas). Not to mention that water is just darn good for you! Continued >

This Old Boat - Ranking Boats


If you have produced farm equipment you know how important owning a trailer puller is. Once the devices are finished it has being pushed to a warehouse and sometimes to a showroom. Despite the proven fact that these older boats are bona fide antiques, does not mean that they won\'t have numerous years of good life left. .

Wash Your Boat. Located in Florida, USA. If your gelcoat is severely oxidized, speak to your neighborhood boat yard and possess it done professionally.

POOR - rating is provided to a cruiser that\'s described as a \"project boat\". Written http://www.mapquest.com/maps?city=Marina&state=CA maintenance records validate repetitive enhancements and service by her owner. Engine area is spotless and tidy. Isinglass and canvas is functional however it will require replacing before long. This vessel is turn-key, all set to go cruising!.

Mike Dickens, the author, is really a live aboard boat mercury boat motors owner and owner/Broker of Paradise Yachts in Florida USA. We rather you understand exactly what you are going to see to start after all, you\'ll expose the issues upon inspection of the vessel. If you\'ve an outboard boat, don\'t forget to do the engines, including the undersides of the mount brackets.

Visit the Paradise Yachts website to view our collection of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale. They also lessen the quantity of people needed to do the job. Take time to suit your needs to rinse, clean and wax your boat regularly and your boat could keep ship shape for years to come.

Keeping Your Boat Ship Shape!


What You\'ll Need. Despite the undeniable fact that these older boats are bona fide antiques, does not always mean they will not have some of years of excellent life left. Despite the undeniable fact that these older boats are bona fide antiques, does not mean that they won\'t have numerous years of fine life left.

Wash Your Boat. We rather you understand exactly what you are going to see to start after all, you will expose the problems upon inspection of the vessel. Paradise Yachts offers used quality yachts to customers worldwide.

Remember! For the best overall maintenance to your boat, preventative care is the key. Each boat is ranked based upon the reported shape, current equipment and/or a personal evaluation of the yacht. Interpreting the yacht\'s specs is often incomprehensible at times as for the authentic state and functional grade of the yacht a good variety of listing boat brokers perform a rather inadequate job of explaining their listed boats. Turn-key! This type of vessel is extremely unusual.

Rinsing your boat regularly with freshwater, will lessen the amount of http://www.lamarinanyc.com/ your time needed to wash and wax your boat. The vessel will need several enhancements such as repair of blisters, inside wood work (leaking windows), electronic equipment, canvas, painting, and fiberglass fixes. if it includes a moderate-dull look, select a fine rubbing compound. Each boat is ranked based upon the reported shape, current equipment and/or a personal evaluation of the yacht. Visit the Paradise Yachts how do people view our collection of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale.

Visit the Paradise Yachts web site to view our collection of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale. . The relatively small compact pushers can be utilized for boats and trailers as well as other vehicles weighting approximately 20,000 lbs. This trailer pushers and trailer pullers are outboards for sale going to do a fantastic job both indoor and outdoor. With the trailer pushers or pullers you only need one person that knows how to operate the machine, and that he does not have access to to accomplish any lifting, pulling or pushing.

Keeping Your Boat Ship Shape!


What You\'ll Need. Despite the fact that these older boats are bona fide antiques, does not http://www.dubai-marina.com/ always mean that they won\'t have boating numerous years of good life left. Despite the undeniable fact that these older boats are bona fide antiques, does not mean that they won\'t have many years of excellent life left.

Washing your boat having a high-quality marine soap, as opposed to a standard household cleaner is kinder to the boat. Detergents containing phosphates may bring about damage to aquatic life. Be willing to disburse a large price to achieve these fixes. But when we expose issues with boats initially, we have been able to validate the need for the yacht.

Soft Rags, Wax, Soap, Sponge, Squeegee Compound (for removing deep scratches), Scrub Brush, Boat pole and scrub brush attachment, Hose with a water source. Located in Florida, USA. The boat will most likely need substantial boat yard awareness of enable worry-free traveling. If your gelcoat is severely oxidized, talk to your local boat yard and also have it done professionally.

Most cleaning products contain chemicals which disrupt the reproductive cycle of fish. We rather you understand exactly what you will see to start after all, you\'ll expose the problems upon inspection of the vessel. Turn-key! This type of vessel is extremely unusual.

Remember! For the best overall maintenance to your boat, preventative care will be the key. The relatively small compact pushers may be used for boats and trailers along with other vehicles weighting approximately 20,000 lbs. They eliminate health related problems that utilized to appear from straining the body to push or pull different gear. Visit the Paradise Yachts how do people view our choice of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale.

Who Needs A Trailer Puller?


If from your farm farm equipment you understand how important owning a trailer puller is. Despite the fact that these older boats are bona fide antiques, does certainly not mean which they will not have numerous years of good life left. Once the equipment is finished it has to be pushed to a warehouse and quite often to a showroom. .

FAIR - is offered to a boat that needs some significant attention mercury boat motors to her ready for cruising. Located in Florida, USA. Most yacht sellers require a dark http://www.yourdictionary.com/marina view of their agent mentioning something critical about their boat the used boat listing is meant to attract a spead boat buyer, not scare them away.

Paradise Yachts offers used quality yachts to customers worldwide. This rating guide has been put together to provide you a plan of the yacht\'s basic shape as it relates to everything you will require to accomplish to get the vessel prepared to go cruising. Each boat is ranked based upon the reported shape, current equipment and/or a personal evaluation of the yacht. If it\'s really a sail boat, try to hit as high up on the mast and rigging as possible. If you have an outboard boat, don\'t forget to accomplish the engines, including the undersides of the mount brackets.

Most cleaning products contain chemicals which disrupt the reproductive cycle of fish. Written maintenance records validate repetitive enhancements and service by her owner. Products used on boat hulls and decks could have chlorine, ammonia, potassium hydroxide and solvents, also harmful for the aquatic environment.

Visit the Paradise Yachts website to view our choice of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale. . The relatively small compact pushers may be used for boats and trailers along with other vehicles weighting up to 20,000 lbs. The relatively small compact pushers may be used for boats and trailers along with other vehicles weighting up to 20,000 lbs. With the trailer pushers or pullers you only need one individual that knows the way to operate the machine, and the man does not need to do any lifting, pulling or pushing.

Keeping Your Boat Ship Shape!


If you produce farm equipment you realize how important owning a trailer puller is. Despite the fact that these older boats are bona fide antiques, does not mean which they won\'t have numerous years of good life left. With very secure pushing or pulling systems preventing switches buttons too as braking systems, the trailer pushers and trailer pullers are extremely efficient machineries.

POOR - rating is provided to a cruiser that is described as a \"project boat\". Start by spraying the entire boat using a fine spray. A good quantity of boat listings inform you hardly any regarding the condition of the yachts. Start by spraying the entire boat with a fine spray. Whatever drying method you choose, be certain to remove water ahead of the water spots appear.

Paradise Yachts offers used quality yachts to customers worldwide. This rating guide has been put together to supply you an outline of the yacht\'s basic shape as it relates to everything you will need to do to get the vessel ready to go cruising. Domestic cleaning solutions have very high alkaline levels and will strip the http://www.visitmarinadelrey.com/ wax off your boat\'s hull a lot faster than a specialist marine soap. Isinglass and canvas is functional however it\'s going to require replacing before long. Visit the Paradise Yachts web site to view our selection of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale.

As a vessel broker, I have constructed a method to state to other people the true shape of your yacht. We rather you understand exactly what you are likely to see to start after all, you\'ll expose the difficulties upon inspection of the vessel. Products used on boat hulls and decks may contain chlorine, ammonia, potassium hydroxide and solvents, also harmful towards the aquatic environment.

Remember! For the best overall maintenance to your boat, preventative care is the key. They eliminate health related problems that accustomed used boats for sale to appear from straining our bodies to push or pull different gear. The relatively small compact pushers may be used for boats and trailers along with other vehicles weighting as much as 20,000 lbs. Take time to rinse, clean and wax your boat regularly and your boat will keep ship shape for many years to come.

Keeping Your Boat Ship Shape!


What You\'ll Need. With very secure pushing or pulling systems and prevent switches buttons also as braking systems, the trailer pushers and trailer pullers are incredibly efficient machineries. Despite the proven fact that these older boats are bona fide antiques, does certainly not mean which they is not going to have many years of good life left.

FAIR - is given to a spead boat that really needs some significant attention to make her ready for cruising. Located in Florida, USA. Paradise Yachts offers used quality yachts to customers worldwide.

Washing your boat having a high-quality marine soap, as opposed to a standard household cleaner is kinder to the boat. This rating guide continues to be put together to supply you an outline of the yacht\'s basic shape because it relates to everything you will need to accomplish boat to have the vessel ready to go cruising. Each boat is ranked based upon the reported shape, current equipment and/or a personal evaluation of the yacht. Isinglass and canvas is functional however it will require replacing before long. But when we expose issues with boats initially, we have been able to validate the need http://www.last.fm/music/Marina for the yacht.

Therefore whenever you speak with a person regarding their vessel, you are able to use this help guide to ascertain its relative condition. Detergents containing phosphates may lead to injury to aquatic life. Remember, when working with abrasives they are going to actually take away the gelcoat. Each boat is ranked based upon the reported shape, current equipment and/or a personal evaluation of the yacht. Interact with us at the Trawler Blog.

Visit the Paradise Yachts how do people view our selection of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale. They also reduce the variety of people needed to accomplish the job. Take time to rinse, clean and wax your boat regularly and your boat could keep ship shape for many years to come.

Keeping Your Boat Ship Shape!


What You\'ll Need. When you must push the farming equipment from one http://marinas.com/index?tab=&category=marina point out another about the assembly line, the trailer pushers are the best machines to complete the task because they are easy to operate plus they can push relatively quickly materials from on step of the production to the next. With very secure pushing or pulling systems and stop switches buttons as well as braking systems, the trailer pushers and trailer pullers are very efficient machineries. Despite the undeniable fact that these older boats are bona fide antiques, does not mean which they won\'t have many years of excellent life left.

Remember! For the best overall maintenance for your boat, preventative care is the key. Detergents containing phosphates may result in injury to aquatic life. Be willing to disburse a big price to achieve these fixes. Visit the Paradise Yachts website to view our selection of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale.

Soft Rags, Wax, Soap, Sponge, Squeegee Compound (for removing deep scratches), Scrub Brush, Boat pole and scrub brush attachment, Hose using a water source. Located in Florida, USA. The boat will likely need substantial boat yard attention to boats for sale enable worry-free traveling. Turn-key! This type of vessel is extremely unusual.

Mike Dickens, the author, is a live aboard boat owner and owner/Broker of Paradise Yachts in Florida USA. We rather you understand exactly what you will see to start after all, you may expose the difficulties upon inspection of the vessel. Turn-key! This type of vessel is incredibly unusual.

If you manage a huge warehouse full effortlessly type of heavy equipment, you can make use of a trailer pusher to move them around. The relatively small compact pushers can be utilized for boats and trailers and other vehicles weighting as much as 20,000 lbs. They eliminate health related problems that used to appear from straining the body to push or pull different gear. Visit the Paradise Yachts website to view our collection of Used Trawlers, Used Motor Yachts, and Used Sailboats for Sale.

Music Review: Ludwig Van Beethoven\'s 1st Movement Of The Eighth Symphony


Real Estate in 2013Are you wondering if real-estate is really a good investment in 2013? Or have you been considering buying your first home in 2013 but worried about the economy? There are several reasons why real-estate is really a good investment in 2013 and beyond, but everybody is worried that real estate prices could collapse again as well as the united States could go back inside a recession in 201. Whether or otherwise not the brand is for any small enterprise or maybe your personal brand, search results optimization can help one to one of the best models in the present market. 5 billion! That\'s greater than ten times the populace of the United States! So when a user types in a query on a search results page, do you know the likelihood of your website which makes it to the best three result pages? If your website happens to be just another run-of-the-mill website, then the odds are quite miniscule.

Increasing Online Income Through Affiliate Marketing. Water starts by damaging the molecular structure of compounds into ions or parts of your molecule. Some of the high quality pencils are manufactures and available inside the market with HB lead amd in the choice of primary colors that ensure it is your best option for your promotional gift item.

Consume less salt. The packaging of the merchandise is completed after observing the preference of the shoppers inside the market. If you\'ll like to maintain your shoes, buy a shoe brush so you can scrape off the Old Silver Beach, Falmouth gunk that tends to accumulate about the bottom of your shoes in the dance floor.

The joy any particular one gets by besting a buddy or a foe inside a game is exhilarating. Why? The more you can pay now, the less you may owe your lender and the reduce your interest rate around the remaining debt will be. Before hiring anybody, agree a meeting and talk about every one of the questions you think about important. In general, addicts practice avoidance in situations they can control but seek to manage drug cravings in situations they cannot change.

These are simply a couple of of the qualities you need to search for inside a realtor. Some of the most popular models of this HP multimedia laptop include: the 15-1050NR which comes with an Intel Core i7 processor at 6 GHz, 6GB of RAM and 500GB of hard drive the 13-1030NR which comes with an Intel Core 2 http://the-boat-yard.com/ Duo processor at 86 GHz, 3GB of RAM and 250GB of hard drive and the 17-1010NR using its Intel Core i5 processor operating at 4 GHz, a 6GB RAM along with a whopping 640GB of hard drive. affiliatemission. Bottom line: A custom website designs takes a quality website design agency.

Get in Touch

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum dolor nibh, posuere 
non dui in, vestibulum semper nibh.Pellentesque quis nisl convallis, dictum velit vehicula, 
ornare turpis. Morbi id convallis risus.


323456 Biscayne Boulevard,
Suite 100
North Miami, FL 33181

555-555-5555
contact@veryverde.com

Mo - Fr ( from 9:00am to 5:00pm )

 


Home  /  Contact
© Copyright 2014 veryverde.com.